ZQ-005 Sharp Edge Tester Sharp Edge Toy Safety Sharp Edge Testing Instrument

Description: ZQ-005 Sharp Edge Tester Standard Configuration. 1 sharp edge tester, 1 set of foot switch, 1 power charger, 1 set of table mounting bracket, 1 operation manual Optional accessories: Sharp edge test tape 1 roll 1, in the sharp edge tester head roll a circle of TFE adhesive paper, the overlap size can not exceed 0.1in (0.25mm). 2、Fix the sample office position of the test edge can not be moved and bending. 3, when the assembled toys can touch the edge of the end of its position is not enough to test, sample office should be removed to test, but if removed will If it affects its hardness, other objects can be used to make it hard, but its support area can not be larger than the test object. The angle between the tester and the test edge is 90°±5°. 5、The contact point between the edge end of the tested object and the adhesive paper should be in the middle part of the adhesive paper dispatch. 6, the object under test should be tested in its most unfavourable position. 7, the sharp edge tester strength to 1.35LBS (6N). 8, in the position of the adhesive paper upward force applied to make the indicator light, this time the test edge end of the force is 1.35 LBS. 9, turn on the sharp edge tester switch to make its shaft rotate one turn. 10、Carefully disassemble the adhesive paper not to expand its cut size, with a steel ruler to measure its cut length. 11、If the cut length exceeds 0.5in(12.5mm) then the test edge end is sharp edge. Usage and Understanding. 1. Attach the PTFE adhesive paper to the mandrel as required, then rotate the mandrel 360 degrees along the accessible edge being tested. Check the test adhesive paper by gravity to determine whether the ball can pass completely through the test template. Length of cut. Calculate the cut percentage of the length of the gummed paper. If 50% of the tape is cut, the edge is considered a sharp edge. 2. The edge to be tested shall be the accessible edge as determined by the accessibility test of the part or parts of the toy. 3. If the toy as a whole cannot be tested for accessible edges, the accessible edges may, in the case of a simulated toy as a whole, be If the toy as a whole cannot be tested, the touchable edges can be detached and tested individually in a simulated toy. 4. The key to sharp edge testing is to fix the edge to be tested and ensure that the mandrel is at a right angle to the edge and that there is no relative movement between the mandrel and the edge during the test. There is no relative motion between the mandrel and the edge during the test. 5. Ensure that the pressure applied to the mandrel is constant and stable during mandrel rotation. Age Limits. Age Range Edge Test Requirements Sharp edges are not permitted on toys under 36 months of age. Functional sharp edges are permitted on toys from 37 months to 96 months of age, but a warning statement must be provided. Applicable Type:For toys for children 96 months and under. This product is guaranteed to pass third party testing organisations.

Price: 732.6 USD

Location: shenzhen

End Time: 2024-12-24T17:55:52.000Z

Shipping Cost: 113.3 USD