Description: High quality relay buffer to interface between Yaesu FT-736R radio and will key any VHF/UHF amplifier. The Yaesu FT-736R can only provide for a small amount of current on the external amplifier keying output. Our box will key ANY amplifier and isolate the sensitive keying circuit inside the FT-736R This relay interface box has the proper Yaesu plug to connect into the Ext. Control jack on the back of the FT-736R for keying VHF and UHF amps. This can also be used to switch mast mounted RF preamplifiers (preamps) instead of an RF power amplifier. The RBI-736R has FOUR completely separate relay circuits to completely isolate each RF power amplifier. When you are on 6M (50 Mhz) only the 50 MHz amplifier output jack is switched When you are on 2M (144 Mhz) only the 144 MHz amplifier output jack is switched When you are on 1.25M (222 Mhz) only the 222 MHz amplifier output jack is switched When you are on 70cm (430 Mhz) only the 430 MHz amplifier output jack is switched When you are on 23cm (1296 Mhz) only the 1296 MHz amplifier output jack is switched (as you know, you can only have 4 bands total in your radio, so whatever you put in the optional band slots of the radio will correspond to our relay interface box) Our box will draw <3 MA from your radio keying circuit and will key any amplifier. A very handy accessory. Get one BEFORE you damage your radios amplifier keying output! RCA jacks in and out Needs 9-15 VDC at only 40 ma! Relays rated up to 240 VAC at 5 AMPS! Genuine relay used for switching (not an easy to damage solid state device) Connector color and style may vary Need to switch an HF amplifier? See our ebay listing for many models we make. Need to key TWO amplifiers? See our eBay store listing for the RBI-2 TWO amplifier keying relay interface Need to key MORE than two linears? Contact us for custom made amplifier ptt relay keying interfaces. (We just finished a SIX unit amp keying box, keyed from a single radio) This is not one of those types that make you use a battery to power the unit! This high quality device is power by your station power supply or any filtered DC source from 9-15 VDC (only 40ma required) When connecting your Radio and Amplifier, there may be switching voltage, polarity, and current incompatibility that can cause damage to your radio or amplifier if connected without a switching interface between them. Even if your internal radio switching looks like it might be usable, it is wise to have an extra degree of isolation between your amplifier and radio with our relay buffer interface. 73, Dan W7RF ( Radiodan ) Ham Radio amplifier amateur amatuer radio amplifier relay buffer interface Powered by eBay Turbo Lister The free listing tool. List your items fast and easy and manage your active items.
Price: 149.95 USD
Location: Fort Collins, Colorado
End Time: 2023-09-30T01:11:50.000Z
Shipping Cost: 8.95 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Model: RBI-736R
Type: FT-736R interface
MPN: Does Not Apply
Frequency Band(s): VHF
Brand: Radiodan
