XT-XINTE PCIE 3.0 Cable PCI-E x16 3.0 Adapter Graphics Video Cards Extension

Description: XT-XINTE PCIE 3.0 Cable PCI-E x16 3.0 Adapter Cable Graphics Video Cards Extension 90 Degree Angled for ITX Motherboard ChassisBrand: XT-XINTEColour: BlackWeight: 70g Product description:R33UF-TU double reverse (the gold finger end is reversed, the connector end is reversed)R33UL corner (the gold finger end is reversed, and the connector end is 90 degrees)Wire length: 15cm/20cm (support customized length of 3-100cm, if you need other lengths, please contact us to change the price, thank you!)Adapted graphics card: GTX1080ti RTX2080ti Titan XP radeon RX580 VEGA64 quadroK2200 professional graphics card, supporting the new graphics card that has been out of the factory in the past three years.Speed Bandwidth: PCIe 3.0 x16 (gen3, 128G.s) (Extension cable does not support PCIe4.0, please set the speed to below 3.0 in BIOS.)Compatible chassis: ITX customized chassis (Because the chassis often changes design, please confirm the specifications of the graphics card extension cable with the chassis seller before purchasing.)Product function: A4 ITX graphics card vertical installation extensionRestrictions on use: It is only designated for purchase by the seller of the chassis. It is not suitable for general use and cannot be used. Ordinary buyers should not purchase it.Procurement Tips: Be sure to buy 1~2 samples first and then purchase in bulk after testing and verifying that they are correct.Note: The length of the wire refers to the part of the visible wire, excluding PCB and connectors, refer to the length dimension in the figure below:R33 series product model description:ModelGolden finger and connector interface directionProduct applicationR33UF-TUGold finger male connector is reversed, and the female connector is connected reverselyITX chassis graphics extension cableR33ULThe gold finger male connector is reversed, and the corner of the socket is 90 degreesITX chassis graphics extension cableR33UFThe gold finger male connector is reversed, and the female connector is connected to the female seat straight and 180 degrees.ITX chassis graphics extension cableR33UQGold finger male connector reversed, connected to the female seat with a 90-degree buckleITX chassis graphics extension cableR33JF-TU The gold finger male connector is reversed, and the female connector is reversed. It is used for PCIe4.0 internal testing.ITX chassis graphics extension cableR33SF-TUGold finger flat and straight male connector, connect the female socket reversely.ITX chassis graphics extension cableProduct advantages:1. Wire advantage, use anti-interference low resistance wire, use imported connector, high frequency support PCIe 3.0 X16 8G/bps stable transmission2. Cable length advantage, from 15cm to 60cm can be customized, the adapter sold in our store, the cable impedance is low, the cable length within 60 cm can stably support PCIe3.0 full speed.3. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro short circuit phenomenon, and the product is durable.4. The product is made of high-quality materials, the PCB is made of precision, the PCB uses high TG plates, and the thickness of the copper material is thickened to 1oz. The gold finger has sufficient gold plating content and the gold plating foot has good electrical conductivity, which can reduce the blue screen of crash caused by increased oxidation and rust resistance. Support PCIe graphics cards that have been out of the factory in the past three years.5. The wire used in the product is very durable. Use PCB gaskets with a thickness of 3mm to protect the metal welding points, and lock the screws and hexagonal nuts to fasten the product. The product is strong and reliable, resistant to pulling, anti-interference, and will not break the wire. The nail drop problem. The wire can be bent or folded without affecting the use.6. The PCB is designed with short and fattening so that it will not get stuck on the graphics card. The fattening and longer design makes the board easier to install and reduces the chance of damage.

Price: 19.11 USD

Location: 深圳

End Time: 2024-11-26T07:28:02.000Z

Shipping Cost: 2 USD