Description: Rift White Oak wood veneer 3.625"" x 47" inches with preglued hot melt adhesive A grade quality 1/40" total thickness. ONE piece. Activate glue with household iron or hair dryer and apply pressure while cooling. Trim or sand to final size. One photo shows glue on back side. Grain runs longer direction. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” Phenolic backed veneer = 1/16th"-1/25th" How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection
Price: 20 USD
Location: Louisville, Kentucky
End Time: 2024-02-17T23:09:27.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: White Oak wood veneer with preglued hot melt glue
Veneer Type: Raw
Veneer Cut: Rift Cut
White Oak wood veneer sheet: paper backer backing 10 mil flexible sample piece
Model: White Oak wood veneer sample piece flexible roll
UPC: Does not apply
MPN: Does Not Apply
Wood Type: Oak
Item Type: Veneer Roll
