Description: eBay Low Temperature Lab Ball Grinding Mill Specifications Features Elegant design, easy to operate Low temperature ball milling accessible Ideal for wet or dry grinding application Energy and speed control enables reproducible results Automatic and programmable control with LED display Multiple grinding modes to choose High uniformity and excellent repeatability Fast rotational speed, high efficiency and fine granularity Reversing function Programmable interval and pause times Four samples with different sizes and materials in one experiment Stepless speed regulation; ideal rotary speed selection according to experimental results Large range of materials available for grinding media Gear-drive offers an effective solutions to problems caused by belt driving, such as belt creep and belt abrasion Low vibration rates allow unattended operation Low center of gravity, good rigidity, compact structure, low noise, safe and reliable operation, no pollution and small wear Cooling of the grinding chamber with a built-in fan for long grinding times Areas of Applications Geology and Mineralogy: rock, gravel, sand, minerals Ceramics: porcelain, sintered ceramics, clay, fireclay Chemistry: pesticides, fertilisers, salts, inorganic and organic materials Biology: plants, leaves, freeze-dried samples Pharmaceuticals: ophthalmological agents, gels, creams, extracts, drugs, pastes, dragees, tablets Metallurgy: ores, sinters Material technology: pigments, precious materials, new materials, alloys, mechanical alloying and activating Analysis preparation: spectroscopy, X-ray fluorescence, X-ray structure analysis, Chromatography Working Principle The low temperature planetary ball mill employees cold water to absorb the heating caused by high speed rotation in the ball milling jar, and then exhausts it to keep the ball grinding jar with materials and grinding balls inside at a certain low temperature. Technical Data Item No. DECO-PBM-V-2L-D Features low temperature with water-cooling Compatible Grinding Jars (250ml~500ml) * 4 Max Feeding Capacity 2/3 capacity of the grinding jar Operation Mode 2 or 4 grinding jars working simultaneously Feeding Granularity* Soil materials < 10mm, others materials < 3mm Discharging Granularity down to 0.1μm Sample Type hard, medium-hard, soft, fibrous, brittle, moist Rotational Speed of Grinding Jar 800rpm Rotational Speed Ratio (planetary disk/jar) 1 : 2 (≤4L) and 1 : 1.5 (≥12L) Drive Mode gear drive and belt drive Speed Control stepless speed regulation Electrical Details 220VAC, 50Hz, single phase, 0.75KW Max Continuous Grinding Time (full-load) 72hours Weight 120KG Dimension (L*W*H) 830*480*550mm Noise Level < 70dB *If the sample feed is larger than these then it must first undergo preliminary size reduction. Photo Show Performing a Grinding Operation Complete Set of Vertical Lab Planetary Ball Mill Accessories Please note: For this DECO mill, you require two or four grinding jars of your choice and the corresponding number of grinding balls. The grinding jar material must also be harder than the material to be ground. In normal cases, grinding jars and balls of the same material are used. To shorten the grinding time, larger or heavier grinding jars and grinding balls with a higher density can be used. However, the standard packages of the mill doesn't include the grinding jars or balls. They must be ordered as accessories. Frequency Conversion Control System Main Programs Single direction without timing: samples need long or non-stop milling; Single direction with timing: samples need to be milled in one direction for a designated amount of time before automatic shutdown; Bi-Direction with timing: i.e. samples need to run clockwise for 1.5 hours, then counter-clockwise for another 1.5 hours and so on, for 15 total hours, before the machine shut down itself; Single direction with paused interval and timing: i.e. samples need to run for 0.5 hour, then pause for 1 hour, and then run for another 0.5 hour in the same direction and pause for another 1 hour, for 10 cycles before auto shutdown; Bi-Direction with paused interval and timing: i.e. samples need to run clockwise for 0.8 hour, pause for 0.5 hour, and then run counter-clockwise for 0.8 hour, for 20 cycles, before auto shutdown. Applications Related Grinding Tools Ball Mill Jar (0.1L to 25L optional) Ball Grinding Media (5mm~30mm available)
Price: 4872.16 USD
Location: China
End Time: 2025-01-01T18:15:27.000Z
Shipping Cost: 799.99 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Brand: Unbranded
MPN: Does Not Apply
