Description: Attention : for USA buyers ,this item can free Ship from USA warehouse, delivery : 3-7 days by UPS ! ! This Item includes: 3PCS Nema 34 Stepper Motor with 1500oz-in (10.5N.m) holding torque,6A current,126mm motor body length, 3PCS Driver DQ860MA with 7.8A peak current ,24-80VDC ,256 Microstep 3pcs power supply:350W 60V 1 pc breakout board&cable is free offered 1, Stepper Motor Technical SpecificationsPart No.: 85BYGH450E-060-120 single shaft Frame Size: NEMA34Step Angle: 1.8 degreeVoltage: 2.58 VCurrent: 6.0 A/phaseResistance: 0.43 Ohm/phaseInductance: 5.5 mH/phaseHolding torque: 10.5N.m 1500oz-inRotor inertia: 2900g-cm2Number of wire leads: 4Weight: 4.5 kgLength: 126mmSHAFT DIAMETER : 14MM with keyway on the shaft BLACK A+RED A-YELLOW B+BLUE B-Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you need Double shaft, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks! If you need customer designed size, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks! 2, Stepper Motor Driver DQ860MADQ860MA DQ860MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 24VDC to 80VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 57mm to 86mm outside diameter and less than 7.8A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ860MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on. Features: High performance, low price Average current control, 2-phase sinusoidal output current drive Supply voltage from 24VDC to 80VDC Opto-isolated signal I/O Overvoltage, under voltage, overcorrect, phase short circuit protection 15 channels subdivision and automatic idle-current reduction 8 channels output phase current setting Offline command input terminal Motor torque is related with speed, but not related with step/revolution High start speed High hording torque under high speed◆Low cost and good high-speedtorque◆14 selectable resolutions◆Supply voltage up to +80VD ◆Suitable for-2-phase and 4-phase motors◆ rated Output current up to 5.6A .peak current for 7.8A◆Dip switch current setting 8differentvalues◆Optically isolated input signals◆Pulse frequency up to 200KHz ◆Automatic idle-current reduction◆Small size (143*107*37),Weight:0.5KG 3, Power Supply 350W,60VDC,5.83A 4, Breakout Board DB25 Description: Built in DB25 male connector. DB25 Output Pin:P1,P2,P3,P4,P5,P6,P7,P8,P9,P14,P16,P17. DB25 Input Pin: P10,P11,P12,P13,P15. DB25 GND Pin: P18-P25. Power supply: +5V DC. Built in C-class Optical-coupler. High quality with Surface-mount Tech. We ship worldwide!
Price: 308 USD
Location: CA
End Time: 2024-11-16T03:34:31.000Z
Shipping Cost: 118 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 60 Days
Refund will be given as: Money Back
Model: 85BYGH450E-060-120
MPN: 85BYGH450E-060-120
Brand: Wantai Motor
Country of Manufacture: China
