Description: Walnut wood veneer sheet 48" x 96" with paper backer 4' x 8' x 1/40" thickness A grade quality. Photos are representative of actual stock which will vary in color and grain appearance since it is a natural product. This is one of the most popular and successful woods. The quality of this product should be slightly above most others. Some pictures may be of other sizes, customer projects, helpful accessory products (sold separately) and wet or finished wood. Product is unfinished. The product will look gray/black in color until it is finished and becomes warmer brown. Grain runs longer direction. Ships rolled in long narrow box with application instructions. Also shown wood veneer scraper tool and spray contact cement (sold separately). One can is sufficient to cover one entire sheet. Other sizes, other backers, raw veneer and edgebanding are available. Faster shipping methods are available. Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995. About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so. Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular. Thickness: (will not always be exactly correct, but relatively close) Paper-backed veneers = 1/40” Wood-backed veneers = 1/25” Raw plain veneer with no backing = 1/32”-1/42” How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge. How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying. How to finish: most any conventional finishing products can be used with veneer that is applied correctly. Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect. Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
Price: 110 USD
Location: Louisville, Kentucky
End Time: 2024-03-03T20:36:36.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Veneer Cut: Plain Sliced
Veneer Type: Paper Backed
Item Type: Veneer Sheet
Model: Flat Cut grain American roll thickness thin 10 mil
Walnut wood veneer sheet paper backer FC: Flat Cut American flexible roll thickness thin F/C
UPC: Does not apply
MPN: Does Not Apply
Wood Type: Walnut
Brand: Walnut wood veneer paper backer sheet flexible F/C
