Vanquish LED Light Kit For VS4-10 Phoenix Incision Series 2 IRC00451

Description: Vanquish LED Light Kit For VS4-10 Phoenix Incision Series 2 IRC00451 Vanquish Light Kit For VS4-10 Phoenix and Phoenix Portal. Designed specifically for the VS4-10 Phoenix and its included molded front inner fenders. Features Molded front light buckets with high powered LED and heatsink Red LED tail lights White LED inner fender rock lights LED light controller Manual on / off function Additional on / off control from aux receiver channel. Headlights powered by 2-3S lipo balance plug on light controller Aux control and red LED headlights powered by RX plug Includes X2 Molded front led headlight housings with heat sink. direct fit / bolt pattern with Phoenix body grill X2 5mm red LED tail lights X2 PCB LED rock lights for use with VPS10180 Narrow Molded Inner Fenders (VS4-10 Phoenix Chassis) X1 LED controller with required power plugs And a nifty parts box Installation Instructions for VS4-10 Phoenix Remove stock light buckets from VS4-10 grill. Mount included light assembly to the body with the existing 1-64 hardware. Red LED tail lights mount into stock VS4-10 rear LED housings. Remove stock rock light cap, place PCB LED's in place, replace cap. Connect LED plugs to the Light Controller. Connect Light Controller to 2s or 3s LiPo battery for headlight power source. Connect Light Controller to receiver to power red LED’s, for full functionality use an open auxiliary channel in receiver. Program auxiliary channel on transmitter for 2 positions (On/Off) with endpoints set to max for each position. The 3-position switch located on the LED light controller selects mode (Off / Aux CH on/off control / ON). To control LED function through the transmitter ensure the 3 position switch on LED light controller is in the middle position. Installation tips Attach LED controller and rock lights to chassis. Connect and route headlight and tail light LED light wires to underside of body. Use Black 4 pin connection plug for easy removal of body. Use Balance plug and JST connection for power source and RX connection at chassis for easily removal. Note: JST power source powers head lights and rock lights. RX Aux powers taillights. Both power sources must be connected for full functionality. Vanquish LED Light Kit For VS4-10 Phoenix Incision Series 2 IRC00451 Vanquish Light Kit For VS4-10 Phoenix and Phoenix Portal. Designed specifically for the VS4-10 Phoenix and its included molded front inner fenders. Features Molded front light buckets with high powered LED and heatsink Red LED tail lights White LED inner fender rock lights LED light controller Manual on / off function Additional on / off control from aux receiver channel. Headlights powered by 2-3S lipo balance plug on light controller Aux control and red LED headlights powered by RX plug Includes X2 Molded front led headlight housings with heat sink. direct fit / bolt pattern with Phoenix body grill X2 5mm red LED tail lights X2 PCB LED rock lights for use with VPS10180 Narrow Molded Inner Fenders (VS4-10 Phoenix Chassis) X1 LED controller with required power plugs And a nifty parts box Installation Instructions for VS4-10 Phoenix Remove stock light buckets from VS4-10 grill. Mount included light assembly to the body with the existing 1-64 hardware. Red LED tail lights mount into stock VS4-10 rear LED housings. Remove stock rock light cap, place PCB LED's in place, replace cap. ’s, for full functionality use an open auxiliary channel in receiver. Program auxiliary channel on transmitter for 2 positions (On/Off) with endpoints set to max for each position. The 3-position switch located on the LED light controller selects mode (Off / Aux CH on/off control / ON). To control LED function through the transmitter ensure the 3 position switch on LED light controller is in the middle position. Installation tips Attach LED controller and rock lights to chassis. Connect and route headlight and tail light LED light wires to underside of body. Use Black 4 pin connection plug for easy removal of body. Use Balance plug and JST connection for power source and RX connection at chassis for easily removal. Note: JST power source powers head lights and rock lights. RX Aux powers taillights. Both power sources must be connected for full functionality. × × × × × Buy now and save! Shipping info Click the Shipping & Payments tab above the listing description for more info Click the Shipping & Payments tab above the listing description for more info! Additional delivery notes PICK UP OPTION Sorry, our items are NOT available for pick-up. PAYMENT Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App). Thank you for shopping with us on eBay! Additional Information No additional information at this time Ask seller a question You might also like WPL D12 Suzuki Kei Truck 1/10th Scale RTR RC Car Silver Spektrum SR315 3 Channel Sport Surface Receiver SPMSR315 Spektrum SR215 2 Channel Sport Surface Receiver SPMSR215 MIP 7.0mm Nut Driver Wrench #9704 Contact To contact our Customer Service Team, simply click the button here and our Customer Service team will be happy to assist. Ask seller a question © OZRC Shipping & Payments Click the Shipping & Payments tab above the listing description for more info Payment Accepted Payment Methods Immediate payment is required upon selecting "Buy It Now" or upon checking out through the cart. We accept payment via All Major Credit Cards (Visa, Mastercard, AMEX, Discover), Google Pay, PayPal, & Apple Pay (on mobile & eBay App). Thank you for shopping with us on eBay! Returns Returns are not accepted Buyer will pay for return shipping. eBay integration by

Price: 129 AUD

Location: GEEBUNG, Queensland

End Time: 2024-11-18T06:26:58.000Z

Shipping Cost: 14.14 AUD