TFSC 01 Fork Spring Compressor Tool for Most Road Racers Motorcycles Sport Bikes

Description: Feature 【Works On】TFSC 01 Fork Spring Compressor Tool is specially designed for Victory Cross Country, Victory CCT, Kawasaki and other sports bikes, road racers and motorcycles with barrel forks. Just tighten the nuts to adjust the length and width of the bolts near the top and top to fit your fork. 【Premium Material】Made of the highest quality stainless steel, high strength, anti-corrosion and rust, impact resistance, strong and durable. High precision and hardness ensure reliable long-term service. 【High Performance】The TFSC 01 Fork Spring Compressor Tool allows the spring to compress when the fork cap is removed from the stem, making it safer to replace the fork seal and oil. Great for anyone who wants to remove the spring, change the fork oil, or use it in other ways. 【A Must Have Tool】The 17.9-inch long fork spring compressor tool supports both horizontal and vertical modes, and the vertical mode is generally used. The tool has a nut on the top to help compress and squeeze the spring, an adjuster near the top that grabs the spring or fork spring spacer, and a pin on the bottom that holds the fork legs in the spring compressor. This tool is essential for repairing road bike forks or for racers looking to replace springs. 【Satisfaction Guarantee】We committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty. Product Description How To Use The Fork Spring Compressor Tool Mount the fork leg in the Spring Compressor. The Pin on the Foot goes into the hole in the bottom of the fork. Put the pins of the Spring Compressor into the holes and tighten the adjuster screw until both pins are fullycaptured by the hole. Tighten the Spring Compressor with an electric drill with a socket or a speed handle but make sure you stop before the tool hits the top of the fork tube. Once the fork is compressed enough, extend the damping rod and remove the Bleeding Tool. Install the Fork Cap. Make sure the Fork Spring Preload Adjuster is backed out all the way. Bring the jam nut up against the fork cap. Back out the adjuster a few clicks to give the Needle clearance from the Seat while you. Tighten the Jam Nut. Unscrew the Fork Spring Compressor Tool, remove the fork leg from the tool, and tighten the Cap. Set all your adjusters, mount the forks on the bike, and enjoy. Package Inclued 1*Fork Spring Compressor Tool

Price: 138.89 USD

Location: Rancho Cucamonga, California

End Time: 2024-12-21T19:44:14.000Z

Shipping Cost: 0 USD