Description: Model: STR-A7IV Form-Fitted to the Sony a7R IV & III Series Cameras Fits Sony a7 III, a7S II, and a7R III Arca-Swiss Plate Mounts to Cage Base and Many Photo Tripods Top Handle Mounts Directly to Cage Front Top Handle fits Ikan Grips and Many Bicycle Handles for Custom Grip Mounting Top Handle can Accept 15mm Rod to Expand Accessorizing Options Cut-Outs for Battery, Memory Card, and A/V Output Access Mounts to Tripod Quick Release Plate with 1/4-20 and 3/8-16 Mounts on Base Bottom 15mm Rods are Vertically Positionable to Support Multiple Lenses and AccessoriesWhat's Included: 1 x 1/4-20 Mounting Screw 1 x Cable Clamp 1 x Cage Base W/ Vertically Positionable Rods 1 x Camera Frame For A7 III Series Cameras 1 x Front-Mounted Elephant Trunk Top Handle 2 x 100mm Rods W/ Couplings (4") 2 x 200mm Rods (7-7/8") Shipping Weight (lbs): 3 Shipping Dimensions (in): 13 x 12 x 5 Product Weight (lbs): 2.39 Approx Dimensions: 4.625 x 6.25 x 2.25 in. (Body), 6.125 x 2.75 x 1.75 in. (Top Handle), 3.125 x 4.25 x 3 in. (Base) Base Connection Type: Arca-Swiss Style (Male) Build Material: Anodized Aluminum Cable Clamp: STRATUS Large Size Camera Compatibility: Sony a7R IV, a7 III, a7S II, and a7R III Fixture Weight: .66 lb. (Body), .25 lb (Top Handle), .94 lb. (Base) Grip Length: ~5" Mounting Points: Front Mount (1/4-20 Screws Included) Rod Compatibility: 15mm Standard Rod Extensions: 2x 100mm/4" Rods with Coupling Included Rods: 200mm / 7.875" Rosette: ARRI-Style; Right Hand Position Shoe Mounts: 1; Backless Cold Shoe (Body), 1; Cold Shoe (Top Handle) Stratus Rod Style: Dynamic; 1" Veritcal Play Top Handle Mount: Front Mount (1/4-20 Screws Included) UPC Code: 847983031108 The STR-A7IV is a new form-fitting camera cage direct from Ikan. The frame is shaped to accommodate the Sony a7 III and a7R III camera bodies. The cage comes in three main parts: the top handle, the base, and the camera frame. The top handle mounts directly to the front of the cage frame. There are 42 1/4-20 mounts on the top handle when it is bare, but the grip can be covered with Ikan grips or, if custom grips are needed, can fit most bicycle handles. A 15mm rod can also be inserted into the end of the handle and held in place with a 1/4-20 screw through one of the many mounts. a cold shoe mount is located at the front of the handle, near where it connects to the frame’s front. There are multiple mounting holes on the front of the frame for positioning the handle to either side to make room for accessories and audio adapters. The base is simple and sleek, with mounts for two included 15mm rods (2x 200mm rods plus 2x 100mm extensions w/ couplings) and both 1/4-20 and 3/8-16 mounting points for tripod quick release plates. The locking knobs are large and solid and have a kipping function that allows tightening even when the knobs are partially obstructed. The base locks to the frame with an Arca-Swiss style connection, and there are hard stops on either side to allow safe horizontal positioning. This base also has vertically positionable rods that have about 1″ of play to better accommodate matte boxes, follow focuses, and lens supports for many styles of lens. There is a lock-and-track on the very bottom of the base for lightweight (15mm) dovetail plates, but note that not all dovetail plates conform to the same standard of size or manufacturing tolerances. The camera frame is shaped specifically to the Sony a7 III-style body, with cutouts on top for button and dial access. Room has been made on the left and right sides of the cage for access to memory card slots, A/V inputs & outputs, and remote port access. There is also a cutout on the bottom of the cage over the battery port, allowing for quick swaps without having to unmount the cage. The cable clamp on the left side of the cage is positionable and universal and can be used to support cables nearly anywhere on the camera’s left-hand side. Finally, the Arca-Swiss style base connection is also compatible with many types of photo tripod quick-releases, which means that is can be mounted to a photo tripod instead of the tripod quick release plate if it is removed from the base.
Price: 99.99 USD
Location: Houston, Texas
End Time: 2024-09-01T15:21:17.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Compatible Brand: For Sony
Color: Gun Metal Gray
Compatible Model: Sony A7R IV and A7III
MPN: STR-A7IV
Material: Anodized Aluminum
To Fit: Camera
California Prop 65 Warning: This product can expose you to chemicals including Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm.
Brand: ikan
Type: Camera Cage
Manufacturer Warranty: 1 Year
Model: STR-A7IV
Compatible Series: For Sony Alpha, For Sony α
Country/Region of Manufacture: China
Item Weight: 2.39 lbs
