Standard Grade Fluorescent Reflective Tape (SPFLY)

Description: The Tape Depot Fluorescent Yellow and Orange Conspicuity TapeAlanson Products Reflective Material - Super Intensity Prismatic Vehicle Conspicuity Marking Tape SPFLY is in fluorescent color, high-visibility, highly reflective, weatherproof, self-adhesive films with excellent corrosion and solvent resistance. The smooth surface allows a very good printability. The retro reflective system consists of sealed cells of air backed micro prisms, using total internal reflection. The distinct shape of the sealing identifies the machine direction.------------------------------- 10 Year DurabilityEncapsulated Prismatic Retro Reflective TechnologyExcellent FlexibilityDaytime Color: Fluorescent Yellow or Fluorescent OrangeMeet Multiple Specifications-U.S. ASTM D4956 Type VIII (U.S.A)-DIN 67520, DIN 6171-1 (German)1” 2”, 3” 4” width are availableLogo Imprinting is acceptable-------------------------------Physical PerformancePropertyFMVSS 108 RequirementsConspicuity MarkingsHI-INT-1800 Series Adhesion (ASTM D4956) 90o Hanging Weight < 2 Inch (55 mm) Movement0.2 Inch (4 mm)Shrinkage (ASTM D4956) < 1/8 Inch change on 9x9 Inch Panel No Measurable ChangeFlexibility Wrap around a 1/8”mandrel @ 32oF (0oC) No CrackingNo CrackingImpact Resistance 100 In-Lb, 5/8 Inch TipNo Damage Outside ImpactNo Damage Outside ImpactChemical Resistance (SAE J1967) No RequirementNot Affected by toluene, #2 diesel fuel, gasoline(Leaded) Kerosene, TSPDetergent, Xylene, DiluteMetal Brighteners Corrosion Resistance No RequirementNo Effect 1000 Hours(ASTM B-117 Salt Spray)Minimum Application Temp. 60oF (15oC)High Pressure Wash Test 45o Angle, 1200 psi, 8 Inch AwayNo RequirementNo Peeling Off-------------------------------PhotometriesDaytime Color (x,y,Y)The chromaticity coordinates and total luminance factor of the retroreflective tape conform to Table A Daytime Color Specifications Limit (see Note 1).Color Test – Ordinary Colored Tape Conformance to standard chromaticity (x, y) and luminance factor (Y %) requirements shall be determined by instrumental method in accordance with ASTM E 1164 on tape applied to smooth aluminum test panels.The values shall be determined on a spectrophotometer.Computations shall be done for CIE Illuminant D65 and the 2° standard observer (see Note 2)Table ACOLOR1234Daytime Luminance LimitxyxyxyxyMin.Max.Fluorescent lime-yellow0.3870.6100.3690.5460.4280.4960.4600.54060 Note 1: The four pairs of chromaticity coordinates determine the acceptable color in terms of the CIE 1931 Standard Colormetric System.Note 2: The instrumentally determined color values of retroreflective tape can vary significantly depending on the make and model of colorimetric spectrophotometer as well as the color and retro reflective optics of the tape.-------------------------------Coefficients of Retroreflection (RA)The values in Table B and C are minimum coefficients of retroreflection expressed in candelas per lux per square meter (cd/lux/m2).Coefficients of Retro reflection (Required by North American Market)Conformance to coefficient of retro reflection requirements shall be determined by instrumental method in accordance with ASTM E-810 “Test Method for Coefficient of Retroreflection of Retroreflective Tape”, and per E-810 the values of 0° and 90° rotation are averaged to determine the RA in Table BTable B - Coefficient of Retroreflection RA for new reflective tape (cd/lux/m2) per ASTM D4956 Type VIIIEntrance Angle-4°30°Observation Angle0.2°0.5°0.2°0.5°Fluorescent lime-yellow56020026092Coefficients of Retro reflection for new tape (cd/lx/m2) as per DIN 67520:2008-11:Unit: cd/lux/m2Observation Angle0.33°1.00°1.50°Entrance Angle 5°20°30°40° 5°20°30°40° 5°20°30°40° Fluo. Yellow-green240190130242824162.5121071 -------------------------------Adhesive-------------------------------MaintenanceCleaningRoutine washing is recommended for maximum performance. The following cleaning methods are recommended.* Wash with sponge, cloth or soft brush using water and detergent.* Automatic truck/car wash or standard high-pressure hand spray:Maximum pressure-1200 PSI/ 80 bar.Maximum water/wash solution temperature- 140°F/ 60°C.Minimum of 12 inches/ 30cm distance of cleaning jet(s) from markings.Cleaning wand or jets to be at no greater angle than 45 degrees from perpendicular to the marking surface.* When using metal brighteners, follow manufacturer’s recommendations for dilution.Thoroughly rinse from markings after soaking vehicle.-------------------------------Storage* Cool, dry area out of direct sunlight.* Temperature 65-75°F (18-24°C) humidity 30-50%.* Store rolls horizontally, in carton or in original packaging.-------------------------------Shelf Life* Apply Alanson Products Reflective Material – Super Intensity Prismatic Vehicle Conspicuity Markings Tape within two years of receipt of material.-------------------------------General Performance ConsiderationsAlanson Products Reflective Material – Super Intensity Prismatic Vehicle Conspicuity Tape will provide maximum durability when:* Recommended procedures are followed.* Marking is applied to vertical surfaces.Actual durability will be based on actual customer use, field testing, exterior exposed testing and artificial weathering testing.Durability can be reduced if recommended techniques are not followed:* Failure to cut markings around rivets, seams and body are panels.* Improper use of high pressure cleaning.* Spillage of chemicals or solvents.* Improper application or surface preparation. NOTE: The physical properties listed above are typical test results obtained from a series of laboratory tests and should not be used for the purpose of writing specifications. Before using this product, user shall determine the suitability of the product for his/her use; and user assumes all risks and liabilities in connection therewith. All test procedures used are in accordance with ASTM and PSTC methods. If you need assistance or have questions call: 888-282-8273 SHIPPINGEnjoy fast and reliable shipping when you buy your products from The Tape Depot. Our ordering and shipping services are among the best in the industry due to short processing times and a variety of shipping methods. Your orders are packaged at our offices in Miami Florida and sent out typically within 1 or 2 business days. PAYMENTSThe Tape Depot has partnered with PayPal to offer you the very best in payment services. PayPal allows you to buy with confidence, knowing your payments are processed quickly and securely with state-of-the-art encryption technology. RETURNSThe Tape Depot understands that not every purchase is a good fit for every customer. That’s why we make the return process as simple as possible using the eBay interface.

Price: 59 USD

Location: Miami, Florida

End Time: 2024-12-02T20:24:08.000Z

Shipping Cost: 0 USD