Sikaflex 1A Polyurethane Sealant, 10.1 oz, 12 Pack, Pro Caulk Gun, ALUMINUM GRAY

Description: Sikaflex 1A Polyurethane Sealant, 10.1 fl oz, Aluminum Gray Sikaflex 1A is a premium grade, high performance, moisture cured, 1 component, non-sag elastomeric polyurethane sealant for forming permanent, water and weather resistant seals in exterior gaps and joints. Sikaflex 1A is excellent for small joints and fillets, windows, door frames, reglets, flashing, roofing detail applications, and many construction adhesive projects. Sikaflex 1A can be used in both vertical and horizontal joints where the maximum depth of sealant is 1/2 in or less. This listing is for 12 pieces (1/2 case) 10.1 fl. oz. cartridges that fit most caulking guns. Plus our bonus AWF 2000 Pro Caulk Gun. Benefits Fast tack-free and final cure times Flexible ±35% movement High elasticity - cures to a tough, durable, flexible consistency Exceptional cut and tear resistance Stress relaxation Excellent adhesion - bonds to most construction materials without a primer Weatherproof - proven in tough climates around the world Odorless, non-staining Jet fuel resistant Certified to NSF/ANSI Standard 61 for potable water Urethane-based, suggested by RPA for radon reduction Paintable with water, oil, and rubber based paints For a 10 fl. oz. cartridge 1/4" bead will yield 24 ft. of sealant 3/8" bead will yield 11 ft. of sealant AWF Pro Caulk Gun Our 18:1 Pro Caulk Gun is a manual caulking gun that takes industry standard 10.3 oz. cartridges. Its durable design is perfect for frequent high volume use and features a pivoting barrel for seamless caulking around corners, curves, and tight spaces. The 18:1 mechanical advantage provides 18 lbs. of application pressure for each lb. of force applied to the trigger handle, perfect for applying high viscosity caulks and adhesives. In addition, our caulking gun features an instant pressure release tab, to prevent excess caulk leakage and a convenient pin to puncture the inner seal of the adhesive cartridge. Features: Standard 10.3 oz. Cartridge 18: 1 Mechanical Advantage Seal Puncturing Pin Wear Compensating Device Built-in Ladder Hook Sintered Steel Catch Plate Barrel Turns - Application Around Corners Medium-High Viscosity Materials Thumb Activated Instant Pressure Release Application and Use Use between 40° and 100°F, in cool weather store at room temperature for 24 hours prior to use. For best performance apply Sikaflex when joint is at mid-point of its expansion and contraction. Apply sealant with steady pressure, forcing the sealant into the joint. Sealant should be applied to both sides of joint, use bond breaker tape to prevent bond at base of joint. If the depth of the joint exceeds 1/2" use of a backer rod is recommended. Tool sealant to ensure full contact with joint walls and remove trapped air. Do not tool with detergent or soap solutions. Tooling results in a correct bead shape, a neat joint and maximum adhesion. Allow 1 week cure when using Sikaflex 1A in total water immersion situations or before painting. For more information Sikaflex 1A Tech Data Sheet Sikaflex Material Safety Data Sheet

Price: 124.29 USD

Location: Freehold, New Jersey

End Time: 2025-01-12T22:26:27.000Z

Shipping Cost: 0 USD