Seastar Uflex Hydraulic Cylinder Seal Bleed Kit Steering Support Bracket Puller

Description: Seastar Uflex Hydraulic Cylinder Seal Bleed Kit Steering Support Bracket Puller【Steering Support Bracket Puller】Used to safer removes support brackets for seastar and uflex. Can minimize damage, gouges and scrapes to the steering bracket during removal process. Works great. 【Steering Cylinder Seal Kit】Used to install the pivot/front hydraulic steering cylinders for seastar. Can help you repair leaking/weeping cylinder seals, rebuild the outboard front mount hydraulic cylinders, prevent the leaking of fluid and optimizing efficient performance. 【Bleed Filler Kit】Helps better and efficiently to fill or bleed for seastar, baystar or hynautic steering systems. One person easily controls the bleed process to change out fluid bottles quickly and cleanly. 【Perfect Combination】These 3 kits will make you work on steering system for seastar more simple, safe and convenient. 【Package Includes】1 x Steering Support Bracket Puller, 1 x Bleed Filler Kit with Bridge Tube and Screw Cap & 1 x HS5157 Hydraulic Outboard Seal Kit ( 2 x Seal Gland, 1 x Pin Wrench, 1 x Seal Gland Assembly Guide Tool, 8 x "O" Ring). Perfect Combination:These 3 kits will make you work on steering system for seastar more simple, safe and convenient.Steering Support Bracket PullerMade from quality & high strength steel with black oxide coating, corrosion resistance, sturdy and durable.A Must ToolThis puller will help you remove the support brackets more simple, safer and easier. Saving time and reduce not necessarily dangerous.Used to safer removes support brackets for seastar and uflex.Can minimize damage, gouges and scrapes to the steering bracket during removal process. Works great. Application:Suitable for most seastar and Uflex support brackets.Steering Support Bracket PullerMade from quality & high strength steel with black oxide coating, corrosion resistance, sturdy and durable.A Must ToolThis puller will help you remove the support brackets more simple, safer and easier. Saving time and reduce not necessarily dangerous.Used to safer removes support brackets for seastar and uflex.Can minimize damage, gouges and scrapes to the steering bracket during removal process. Works great.Bleed Filler Kit with Bridge Tube and Screw CapWhen filling oil into helm turn around the steering wheel and the air will be released out of the helm.Features:Helps better and effeciently to fill or bleed for seastar, baystar or hynautic steering systems.Quickly connect the oil bottle with brass fitting and screw cap, leak free connection.Easy & Convenient to Use: One person easily controls the bleed process to change out fluid bottles quickly and cleanly.Made from quality copper & PVC, corrosion resistance, lightweight, reliable and durable.Helm Filler Tube:Use for seastar inboard/outboard hydraulic helms. Hose with screw cap which fits for seastar or equivalent oil bottles. Allows for bleeding when used properly.Bridge Tube:Can connect for seastar two Bleed fittings on steering cylinder. It can much improve clearance between cylinder bleed valves and bottom of engine compartment.Instructions:Attach bottle to helm reservoir; (Don't let bottle run empty or pierce bottle.)Connect bridge tube to bleed fittings on steering cylinder and loosen/open fittings.Use helm to pump fluid through system by turning the wheel in one direction. Air bubbles will be pushed to the reservoir at the helm.Manually swing the outboard through full articulation to relieve trapped air and confirm good bleed.Note:Orientating bleed fittings up while pumping fluid with helm will allow air to escape cylinder.Repeat 3-4 as necessary until no air is visible in bridge tube.Tighten bleed fittings before removing bridge tube.HS5157 Front Mount Steering Cylinder Seal Kit with WrenchMade from quality billet aluminum, corrosion resistance, anti-rust, sturdy and durable.Quick Tip:Use the adjusting nut inboard of the starboard support bracket to remove steering slop.Once the tension screw is loosened on this nut, turn it counterclockwise by hand to remove any slop, and then retighten the tension bolt.Used to install the pivot/front hydraulic steering cylinders for seastar.This seal kit fits for most outboard boats with single or twin engines.Can help you repair leaking/weeping cylinder seals, rebuild the outboard front mount hydraulic cylinders, prevent the leaking of fluid and optimizing efficient performance.Front Mount Cylinders Part#:HC5340, HC5341, HC5343, HC5344, HC5345, HC5346, HC5347, HC5348, HC5365, HC5375, HC5394, HC5445, HC6750, HC6751, HC6752, HC6753, HC6754 & HC6755.How to Rebuilding an Outboard Steering Cylinder: 1. Loosening the Seal Gland Turn the outboard hard to port; place the pin wrench (supplied in the seal kit) in the holes of a gland, and use a 5⁄8-inch box wrench on the nut on the port end of the piston rod. Turn counterclockwise on the pin wrench with opposite pressure on the box wrench to loosen the seal gland. 2. Removing the Support Bracket Use a 3/4-inch socket wrench to remove the nut and washer securing the support bracket to the support rod. Do the same to the piston rod nut and washer. Use wrenches on the opposite ends to keep the rods from turning. With hardware gone, pull off the support bracket. 3. Removing the Old Seal Gland Finish unscrewing the old seal gland. If you can't grip it well with your hand, use the pin wrench. Slide it off the piston rod. A small amount of hydraulic fluid will leak out of the cylinder, but having the outboard hard over to port should minimize this. 4. Installing the New Seal Gland Place the tapered guide tool from the kit on the end of the piston rod and lubricate it and the piston rod well with oil or grease. Carefully slide the new seal gland over the guide and onto the piston rod until it reaches the cylinder. Screw the seal gland into the cylinder, but don't tighten it yet. Remove the guide tool; It's not part of the final assembly, but you will need it for the other side. 5. Reinstalling the Support Bracket Reconnect the support bracket to the support rod and piston rod and replace the washers and nuts, tightening the nuts against the washers. You may need to use wrenches on the opposite nuts to tighten sufficiently. 6. Tightening the New Seal Gland Use the pin wrench to tighten the new seal gland while using a 5⁄8-inch box wrench on the starboard end of the piston rod for counter torque. To replace the starboard seal gland, turn the outboard hard to starboard and repeat steps 1 through 6.Package Includes:1 x Steering Support Bracket Puller1 x Bleed Filler Kit with Bridge Tube and Screw Cap1 x HS5157 Hydraulic Outboard Seal Kit (2 x Seal Gland, 1 x Pin Wrench, 1 x Seal Gland Assembly Guide Tool, 8 x "O" Ring)PaymentShippingReturnContact usAbout usPaymentWe accept PayPal payment and many other payments. Items will be shipped within 1 business day of receiving full payment. ShippingAll items will be shipped out in 1 business day,no expedited service available. We have multiple warehouses in US, and will choose the nearest one for shipping, according to your address and our inventory ReturnFor return, all we ask is you send it back in the same condition it was received - new and unused. In order to process a return or exchange instantly for you, please send us a message with pictures firstly when you contact us, we will be happy to assist you immediately. Your satisfaction is our priority. Contact usAny Questions,Just feel free to contact us on eBay.We will reply you in 1-2 business day.About usWelcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in AUTO PARTS, Business and Industrial Products, Home and Garden products for more than 10 years.We believe that it is our vision and mission to provide high-quality products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.

Price: 82.51 USD

Location: Walton, Kentucky

End Time: 2024-09-05T02:46:40.000Z

Shipping Cost: 0 USD