SADDLE PLATE ORNATE Sml Halter Decorative Brass Custom Engraved FAST TURNAROUND

Description: 2 1/2" x 1/2" SOLID BRASS ORNATE DESIGN SADDLE OR SMALL HALTER PLATE, CUSTOM ENGRAVED. TO ORDER: Please add your preferences in the Notes to Seller section. (NOTE: ALL of the following information (1-4) is required when ordering. Any omission will result in a delay of your order.) (Charges for a second line ($3 extra)* and/or any other extras will be billed, via Paypal, in a separate invoice.)*We normally don't like to offer a second line on this plate, as to accomodate the eccentric curves of the plate, it is very difficult to not 'bleed' off the edge. Please eBay message us, before ordering, to see if it can be done. 1. Specify which Fasteners you want:NOTE: Fasteners are NOT included except where specifically noted. See below for ordering fasteners of your choice.Brads/Nails (no charge)Fancy round head Phillips screws ($1.95 EXTRA*)1/4" Rivets ($1.95 EXTRA*) used for 1-ply (single layer) leather OR 2-ply (double layer) nylon3/8" Rivets ($2.95 EXTRA*) used for 2-ply (double layer) leather OR 3-ply (triple layer) nylon 1/2" Rivets ($2.95 EXTRA*) used for 3-ply (triple layer) leather OR 3-ply + (triple layer) nylon * Unfortunately, when larger/longer rivets are ordered, increased USPS rates (as of 1/21/2018) apply: (Billed through PayPal via a separate invoice) (When you are NOT ordering fasteners, we still need to know what fasteners the holes will be drilled for.) 2. Specify one or two lines of engraving.A second line is $3.00 extra as stated above. (Billed through PayPal via a separate invoice)3. For EACH line, write text exactly as it is to be engraved.Write text exactly as it is to be engraved for EACH line. We will engrave in all high case (all caps) unless otherwise requested, except for script and Olde English which will be engraved in Upper & Lower unless all high case is specifically requested.Do NOT use quotes ("), unless they are to be engraved.Maximum of 20 characters, including spaces, on the first line. The first line is usually a bolder, more prominent font, while an optional second line is usually slightly smaller. The choice of font represents such, e.g. 1st line Roman Block (RB), 2nd line Simple Block (SB).4. For EACH line, Choose a font from photos 4 or 5: SIMPLE BLOCK (SB)SIMPLE BLOCK ITALIC (SBI)FOUR LINE BLOCK (FB)FOUR LINE BLOCK ITALIC (FBI)ROMAN BLOCK (RB)ROMAN BLOCK ITALIC (RBI)CLARENDON (C)CLARENDON ITALIC (CI)SIMPLE SCRIPT (SC)SLANT SCRIPT (SS)CENTURY BLOCK (CB)OLDE ENGLISH (OE)(We offer Script and Olde English in upper & lower case only, unless by special request.) NOTES:Maximum of 20 characters, including spaces, on the first line. A second optional line is $3 extra which will be billed, via Paypal, in a separate invoice.The first line is usually a bolder, more prominent font, while an optional second line is usually slightly smaller. The choice of font represents such, e.g. 1st line Roman Block (RB), 2nd line Simple Block (SB).(Charges for a second line and/or any other extras will be billed, via Paypal, in a separate invoice.)IMPORTANT: Check your eBay messages frequently. If we don't receive a response from you to any questions we may have about your order before the eBay ship-by date, we reserve the right to make our best judgement as to layout, colors fonts, case, and/or size, in order to meet those shipping requirements. ***************************************************************************************** DESCRIPTION: This size is the normal size for a saddle plate (usually engraved with the owner's name) or a small halter. The flamboyant and ornate design is ideal for the show ring. They are made from the finest quality brushed satin solid brass with one line engraved included. They can be attached with brads, or screws ($1.95 extra) to the cantle of your saddle , or rivets to your halter. Can also be used for pet and ID tags. (Halter or pet tags should be mounted with rivets.) Perfect for identifying your horse's lineage, owner, phone number, etc. with an optional second line ($3 extra). They are finished with a baked-on synthetic resin, that will not tarnish or rust. They are extremely sturdy and create an elegant finish to the halter. They can also be used for mounting with rivets to leather belts, bracelets and key chains. We rotary diamond engrave the name five times into the brass, to create a very durable engraving, much more so than just diamond etching or laser engraving, that has a tendency to rub off. The exposed raw brass is then double acid oxidized to produce the darkened image. Our brass plates are the finest quality available for engraving, and are finished with a baked-on synthetic resin, that will not tarnish or rust. The plate is .050" thick, almost that of a dime, so it is very sturdy, and will add an elegant finish to your tack. Please be double sure to check your order before submitting and include a phone number to reach you, if we have any questions. Please ask all questions before purchasing! If you are ordering more than one, please email your order separately, to avoid confusion. INTERNATIONAL SHIPPING:We are no longer shipping rivets internationally, as this quadruples your shipping charge!!We are NOT responsible for customs duty, taxes and fees, etc., or any delay that might be incurred from them. Thank you for your order. We have been in business since 1984, previously as Endless Creations, now as Endless Etc LLC, (endlessetc.com), with many satisfied and happy customers. We have attended many prestigious horse shows across the country, over the years, so whether you're an 'old' customer, or a new client, we welcome you to experience our high standards of workmanship and service. We aim to please! Endless Etc LLC Also, see our additional listings of brow, saddle and halter plates, circular bridle tags, stall signs and holders, and our brass name plate/leather key fobs and bracelets.

Price: 23.95 USD

Location: Leonardtown, Maryland

End Time: 2024-12-31T21:48:55.000Z

Shipping Cost: 4.99 USD