Rockville RXM-S20 1600w 4-Channel Amplifier Amp w/ PA Mic For RZR/ATV/UTV/Cart

Description: Car Audio & VideoPro AudioMarine AudioLighting Karaoke Home/Portable Audio Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included! --> Click Thumbnails to Enlarge Condition and Warranty Condition: BRAND NEW IN ORIGINAL PACKAGING Warranty: 1 YEAR AUDIOSAVINGS Product Description Videos of RXM-S20: Includes: Amplifier PA Microphone Mounting Hardware Owners Manual Description: The RXM-S20 is a marine amplifier that is perfect for many applications. This amplifier is water resistant so you can use it in a car or boat or any other application! The micro size of the amplifier also allows for installation in tight spots. The RSM-S20 is a 4 channel amplifier with 1,600 Watts peak output and 300 Watts Dyno Certified RMS power (4 x 75 @ 4 Ohms). Here at Rockville we offer the best value in car audio. We therefore want to make it easy for you to compare our products to any brands on the market.The peak rating can be used to compare with brands who use peak ratings such as Boss and Power Acoustik while the Dyno Certified RMS rating can be used to compare with top brands such as Kicker, Rockford, Alpine, etc. We put our newest technology into this amp! It is a class A/B full range micro amplifier and runs very efficiently. Full size class A/B generally run at about 50% efficiency depending on the quality of the particular amp. This one is able to run at around 70% efficiency due to the high quality of the parts we use to build these. What 70% efficiency means is that the amplifier will draw less current from the battery and will play louder! The PCB layout of this amplifier is really clean as well. This amp will last you a long long time! I want to take a second and talk to you about the inside of the amplifier which is the most important part. This amplifier uses a double sided PCB board. As the name implies when using both sides we double the surface area allowing us to make an amplifier that is twice as good! With all this surface area, it allows us to separate the channels more so you get less crosstalk interference between channels. The grounding path has more space so you will get less unwanted distortion. This is a high power amplifier that needs large amounts of copper to carry all the current. The extra layer on the PCB allows us to use as much copper as we need without worrying about space on the PCB! The material of our PCB is called FR4. It is made of fiberglass which is resistant to heat or fire. We pride ourselves in making the best quality components both in the inside and outside! This PCB board also uses SMD technology. SMD means surface mounted devices. This type of PCB arrangement does not require holes to be punched in the PCB to run a connection to the other side of it. This SMD technology is a more reliable way of manufacturing. Lots of high end brands use this method. The model # of the transistor is 718 688. The model # of the MOSFET supply is SW50N06. The transformer size is 1.41” inches. We also use a sealed type of potentiometer. The potentiometer is a measuring instrument. It is a voltage divider used for measuring electric potential (voltage). There is a carbon track inside where the wiper comes into contact with the track to determine the resistance of the potentiometer. Our sealed type have these mechanisms insulated so no dust can get inside. Only higher end amplifiers use these sealed types that we use. We also use Elna RA3 capacitors that are built in Japan. 99% of amplifiers on the market use China-built capacitors, which are cheaper but they do not sound as good. These types of capacitors increase the sound quality relative to the ones commonly found in most amps on the market. With our ELNA capacitors you can hear the difference. You will get rich quality-grade sound. Most brands do not even know what is in the inside of their products. We work hard to ensure we build amps we are proud of and we want to supply you the information about what makes our products sound so good! I wanted to take a second and talk about the waterproofing process we use on this amplifier. We use a chemical compound which includes Acrylate Acid, Silicone, Polyurethane, and a few other substances. When these chemicals solidify, it becomes a protective on the PCB. This is what we call a conformal coating. This makes the amplifier water resistant. It also prevents oxidization and protects the amplifier from moisture. There are 3 ways manufacturers can conformally coat a PCB board. Soak, paint, or spray. Our PCB board utilizes the painting method of conformal coating which in most experts opinions is the best option. We would like to offer you a 90 day money back guarantee. We are so confident you will love this amp! If you don't then we will send you a label to return it for all your money back! Features:Rockville RXM-S20 Proton Series 1600w Peak/400w Dyno-Certified RMS 4 Channel Micro Marine/ATV Amplifier with PA Microphone Included!PA Microphone with talkover - When you talk on the mic it will must the music and when you stop talking the music will come back onDyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc)300 Watts (4 x 75 Watts) at 4 ohms and 1% THD+N400 Watts (4 x 100 Watts) at 2 ohms < 1% THD400 Watts (2 x 200 Watts) bridged @ 4 Ohms < 1% THDPeak: (Use these ratings when comparing with the top budget brands such as Boss, Power Acoustik, etc)Marine amplifier with conformal coated PCB boardHigh-Speed MOSFET Power SupplyStudio-Grade Bipolar Output Stage TransistorsDouble Sided Surface Mount (SMD) PCB Design Selectable +6dB/+12dB Bass Equalizer @ 45hzChannel Separation: 50 dBCurrent drawn @ MAX RMS output: 27A @ 4ohm, 40A @ 2ohmEfficiency @ MAX RMS output: 70% @ 4ohm, 63% @ 2ohm2-Ohm Stable Stereo4-Ohm Mono Bridgeable3 Channel Mixed-Mono CapableInput sensitivity: 200mV-6VMute and Delay Soft Start SystemFull IC-Controlled Protection Circuitry2 CH / 4 CH Input Mode SwitchRCA Preamp Line Output8 Volt Preamp CircuitryStatus Mode LED Indicator4 Gauge Lucite Encapsulated Power/Ground Terminals12 Gauge Lucite Encapsulated Speaker TerminalsTHD+A: 0.01%Frequency Response: 15Hz - 20KHzContinuously Fully Adjustable 12dB / Octave Crossover with Differential CircuitryContinuously Fully Adjustable High Pass Crossover: 50HZ – 250HZCH1 & CH2 High Pass 50Hz - 250HzCH3 & CH4 Low Pass 50Hz - 250HzCH3 & CH4 High Pass 50Hz - 250HzSensitivity: 100dB @ 1w / 1mS/N Ratio: >90dBDamping Factor: > 200 @ 100Hz2 x 25A Fuses6 LBSDimensions: (W x H x L) 6.7" x 1.98" x 10.7" About Rockville Quality Control Procedures: The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. All Rockville products are backed with a full 1 Year warranty, though it is unlikely that you will need to use it. Return Policy AudioSavings Return Policy: At Audiosavings, we strongly believe in customer satisfaction and therefore offer free return shipping within 30 days of purchase on all items returned to us within the continental USA. Prior to returning merchandise, contact us and we will give you a return authorization # and a return label. You may return this item for a refund within 30 DAYS of purchase. Warranty Repair/Exchange Period: 1 YEAR If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options: We will send you a pre-paid shipping label to replace the item for a brand new one. We will send you a pre-paid shipping label to exchange the item for another item of your choice. If the item you chose is more or less money we will work out the price difference with you. If you are returning a working item in used condition for a refund there will be a 20% used item fee deducted from your refund. All replacements and exchanges are free. Replacement/Processing Time: Your replacement or refund will process within 3-5 business days of when we receive the item. Please note items with physical damage un-related to shipping are not covered under warranty. Registered software cannot be returned. You MUST notify us within 48 hours if you receive an item that was damaged during shipping. Process for returning items Please email us with your eBay user ID, Item code / model #, Condition of the item, and the reason for your return. Please also indicate whether you would like a replacement, an exchange, or a refund. We will supply you with a reference number (RMA #) to put on the package which will ensure quick processing of your return. All returns require a RMA# to be returned back to our facility. Item Code: RXM-S20 RZR Home / About Us / Contact Us / Returns / FAQ's Copyright © 2016 Audio Savings, All rights reserved. | eBay Template Design

Price: 119.95 USD

Location: Mira Loma, California

End Time: 2024-03-09T00:30:16.000Z

Shipping Cost: 0 USD