Razor E100 Scooter 24 Volt Controller 7 Connectors E100 / E125 (V10+) E150 (V1+)

Description: Razor E100 Scooter 24 Volt Controller - with 7 Connectors for Razor E100 and E125 (Versions 10+), E150 (Versions 1+), E175 (Versions 18+) Razor Part #W13111612015 Razor replacement 24 Volt (7 connector) control module for the chain driven Razor E100 & E125 (versions 10+), E150 (version 1+) and E175 (version 18+) Electric Scooters. ► VERSION SPECIFIC CONTROLLER which has 7 connectors (5 plastic connectors & 2 metal connectors). Throttle connection is 4 wire. ► IMPORTANT PRODUCT INSTALLATION INFORMATION: The E100 / E125 / E175 Series Razor Scooters are a PUSH START Scooter. In order to engage the Motor, You need to push the Scooter, and twist the Throttle! ► IMPORTANT PRODUCT SERIAL NUMBER INFORMATION: Model versions can be determined based on your 8-digit product ID code. The product ID code can be found on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.) . Features ► Razor Factory Original Replacement 24 Volt Control Module with 7 connectors and 4 pin throttle connector► COMPATIBLE ONLY WITH: Razor E100 - E125 Versions 10 and up, E150 Version 1 and up, and E175 Version 18 and above► VERSION SPECIFIC CONTROLLER: This Control Module has 7 connectors (5 plastic connectors & 2 metal connectors).► IMPORTANT INSTALLATION INFORMATION: The E100 Series Razor Scooter is a PUSH START Scooter. You need to Push the Scooter, Twist the Throttle and then the Motor will Engage► IMPORTANT PRODUCT INFORMATION: Your E100 / E125 / E150 / E175 Version is determined based on your 8-digit Product Serial ID code. The Serial Number can be found below the Barcode on the battery cover and/or on the bottom of the frame. The last two digits are the version number (e.g. "01"= version 1, "02"= version 2, etc.)

Price: 16.99 USD

Location: Van Nuys, California

End Time: 2023-12-31T23:48:22.000Z

Shipping Cost: 0 USD