QTY 1 MAXON GEAR MOTOR 19:1 RATIO CORELESS ARMATURE 3-24 VDC REVERSIBLE

Description: THESE WILL BE MAILED IN A CORRUGATED BOX FOR EXTRA PROTECTION.BUY IT NOW IS FOR ONE GEAR MOTOR24 VOLTS D.C. MAXIMUM VOLTAGE BUT WILL START RUNNING AT 1.5 VOLTS. THE OUTPUT SHAFT CAN NOT BE STOPPED (WITH FINGERS) AT 3 VOLTS D.C. !NICE USED MAXON GEAR MOTORS. ALL 19 WERE TESTED AT FULL 24 VOLTS IN BOTH DIRECTIONS. SOME OF THEM HAVE A SECOND STRING OF NUMBERS BUT ALL 19 CONTAIN THE FOLLOWING NUMBER--47.026.022-00.09-001 SOME OF THE GEAR HEADS HAVE THE FOLLOWING NUMBER -- GP022A030-0019B1A00A AND SOME OF THEM ALSO CONTAIN OTHER VARIOUS 6 DIGIT NUMBERS ON THEM BUT ALL 19 RUN AT THE SAME R.P.M.'S. THEY ALL HAVE THE SAME REDUCTION RATIO AND ALL HAVE THE SAME CURRENT DRAW @24 VOLTS D.C. THEY ALSO ALL HAVE AN ENCODER ON THE END. DO NOT BUY FOR THE ENCODER BECAUSE I HAVE NO WAY TO TEST IT. PLEASE USE THESE FOR HOBBY PROJECTS ONLY WITH SIMPLE D.C. VOLTAGE ON THE 2 MAIN LEADS. 19:1 REDUCTION RATIO WITH PLANETARY DRIVE AND BALL BEARING SUPPORTED OUTPUT SHAFT.4MM OUTPUT SHAFT WITH FLAT3MM INPUT SHAFT ON ARMATURE IF YOU REMOVE THE ENCODER.22MM GEARHEAD DIAMETER26MM MOTOR DIAMETER10MM DIAMETER MOUNTING BOSS (THE O.D. OF THE OUTPUT BEARING)3 X MOUNTING HOLES THAT ARE 2.5M X .45 PITCH. THESE 3 HOLES ARE SPACED 120 DEGREES APART ON A 14MM SCREW CIRCLE. EACH MOTOR HAS BEEN STORED WITH DESICCANT PACK TO CONTROL MOISTURE.THESE ARE CURRENTLY $344 NEW FROM ONE OF OUR MOTION DISTRIBUTORS.I MAIL SAME DAY IF PAID BY NOON EASTERN TIME !VERY SMOOTH AND QUIET AND VERY STRONG WITH THE 19 TIMES TORQUE MULTIPLIER !THE SAME MOTORS THAT SIEMENS USES IN THEIR MEDICAL DEVICES. The tachometer (in the pictures) has 1 decimal position on the readout. 57.9 RPM'S AT 3 VOLTS. This is a very high precision and efficient Swiss made DC gear motor. This motor features a coreless armature which is extremely smooth and quiet running. There is no cogging effect from this style of armature. None of the extras that are seen in the photographs are part of the sale. All 19 of them tested and ran and the same speed @ 24 volts d.c. in both directions. +/- 10% THEY ALSO HAD THE SAME CURRENT DRAW. +/- 10%. YOUR SPEED RESULTS MAY VARY WITH A DIFFERENT POWER SUPPLY AND THE TEMPERATURE OF THE GREASE IN THE GEAR HEAD. THESE ALL CONTAIN TINY CHIPS IN THE PAINT, VARIOUS MARKS, SOLDER ON THE LEADS, SET SCREW MARKS ON THE SHAFT, AND SOME HAVE ALUMINUM CAPS ON THE GEAR HEAD AND OTHERS HAVE BRASS CAPS. A MOTOR WILL BE RANDOMLY PICKED TO FILL YOUR ORDER.The sale is for one MAXON gear motor.If you pay before noon Eastern time your package will be mailed the same day.THE BUY IT NOW IS FOR 1 GEARMOTOR

Price: 70 USD

Location: McCordsville, Indiana

End Time: 2024-12-05T18:41:37.000Z

Shipping Cost: 6.5 USD