【PRE-OWNED GOOD USED】ELEGOO Neptune 3 Pro 3D Printer FDM 36-Point Auto Leveling

Description: 【Overview of Neptune 3 Pro】225x225x280mm/8.85x8.85x11 inch market mainstream printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. 【Dual-Gear Direct Extruder】The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS. Notices Before Purchase！ *Pre-owned machines can only be repaired and cannot be returned. *If required, parts and accessories can be purchased separately depending on the condition of the machine. Condition Notes for Pre-owned Machines: New/ Open-box -> The item is in like new, never used/assembled condition. It's returned due to buyers' remorse or fulfillment error. It may only show sign of repackaging due to our inspection service (opening the box, taking photos, recording serial, classifying grades). It's sealed, packaged in the original factory condition with ALL original factory parts/accessories in inspected new or like new condition. Good Used -> This item was inspected, cleaned, repaired to full working order and is in overall good condition. It WILL contain aesthetic signs of wears/tears/scratches (especially on the Tank/Lid). This item may be repackaged. *REMINDER- this is a used unit. NOT REFURBISHED. For Parts Only -> The unit has damage in functionality (e.g. a bad LCD/Z axis). It needs fix-up & touch-up to be fully functional. It usually contains signs of wears/tears/aesthetic issues such as scratches, dents/cracking. It powers on. It might miss one or ALL minor parts/hardware/accessories. Customers MIGHT need to buy up to 2 units with us in order to make 1 functional unit. Great as DIY fix-up projects for experienced DIY experts. [Overview of Neptune 3 Pro] 225*225*280mm printing size can meet the needs of most users. With an STM32 motherboard, all axes of ELEGOO Neptune 3 Pro are driven by silent stepper motors for quieter and more precise movement during printing, which reduces the noise as low as 47-48dB. The easy-to-setup printer comes with the main components pre-assembled, as well as a complete tool kit for quick installation. [Dual-Gear Direct Extruder] The new dual-gear direct drive extruder is made of SUS303 high-quality stainless steel with a 3:1 reduction ratio and stronger extrusion force for smoother filament feeding and more stable & accurate printing, which greatly reduces nozzle clogging and under-extrusion issues, printing effect is better than Bowden extruder. Compatible with multiple filaments such as PLA, TPU, PETG, and ABS. [Nozzle Kit for Better Printing Effect] The nozzle kit contains a TC4 titanium alloy throat pipe, an aluminum alloy flat heat sink structure, and a brass nozzle. The widened aluminum heat sink paired with the front close-fitting efficient cooling fan for a better heat dissipation effect and lower the temperature of the throat pipe, thereby reducing the possibility of nozzle clogging. Fans on both sides of the print head ensure omnidirectional and rapid cooling of printed layers to improve the model details and overhang printing effect. [Smarter Printing Experience] Auto mesh bed leveling adopts a non-contact high precision sensor to automatically scan 36 (6x6) points of the hotbed and collect data in real-time, and then adjust the Z-axis height to compensate for any irregularities and unevenness of the printing platform. (Only applicable to metal printing platforms) Intelligent fan control: after printing, all fans will automatically stop working below 50℃ to extend fan lifespan, reduce noise, and save power. Smart resume printing: the printer will auto-pause when the filament runs out or breaks, and you can resume printing after a power outage. [More Stable Printing] The Z-axis with dual synchronized lead screws and dual-motor drive for more stable movement of the print head and higher printing accuracy, avoiding the printing deviation driven by a single Z-axis lead screw motor. The 4-wheel V-guide rail pulley is made of POM with more stable movement, low noise, wear resistance, and longer service life. [Ease of Use] PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet. The 4.3-inch removable capacitive touch screen can be operated by hand-held or fixed on the base. Built-in print model preview function to preview the model image before printing and observe the printing progress. The 250W high-power hotbed can quickly heat up to 100ºC and start printing. The integrated LED light bar on the gantry can be operated by pressing the buttons on the screen to conveniently observe the model printing in a poor light environment. Frame material: CNC machined aluminium extrusion Modeling technology: FDM(Fused Deposition Modeling) Rated voltage: 115/230V 50/60Hz Forming size: 225X225X280(mm³) Platform size: mm Equipment dimensions:475*445*515mm MAX. nozzle temperature: 260° Celsius MAX. hotbed temperature: 100° Celsius File transfer: TF Card offline printing, online printing File format: .stl, .obj, .amf Filament compatibility: PLA, ABS, TPU, PETG, Wood, Marble, etc UI Lanague: English, French, German, Russian, Italian, Spanish, Japanese, Chinese Resume printing: Yes Filament detection: Yes Net weight: 8.1KG

Price: 109.99 USD

Location: Las Vegas, Nevada

End Time: 2024-10-07T02:39:17.000Z

Shipping Cost: 0 USD