PowerPlasma 52i CNC Capable 50 Amps Plasma Cutter with IPT-60 torch

Description: Power i-TIG 200T HomeAbout UsContact UsShop PoliciesFAQFeedback SKU: PowerPlasma-52i$999.00 | Buy Now! Product DescriptionFor customers looking for a compact, but reliable plasma cutter, the PowerPlasma 52i offers the latest in IGBT inverter design technology. The PowerPlasma 52i is the successor to the popular and long running PowerPlasma 50S series which brought affordability and performance to the plasma cutter market place and gave customers a real choice. Nothing has changed in that respect about the new PowerPlasma 52i. The new PowerPlasma 52i has been completely redesigned though, offering full digital design, inside and out. This has reduced circuit complexity, and improved reliability. But it has also brought some new features which improve upon the solid platform of the PowerPlasma Series. The new addition of the air-pressure guide system, offers digital display of actual air-pressure along with a LED system that guides the operator to the best choice of air pressure for the mode being used. This new setup also features a digital control over Post-Flow and gives the user the ability to see and set the actual post flow time with a digital readout. It can be adjusted for different duty and job requirements. The Post-Flow can be easily increased to preserve consumable life for those long, time consuming cuts. Or if you are doing rapid, short, or intermittent cuts, the Post-Flow time can be adjusted lower by just a quick twist of the dial. The large digital displays are super bright, with improved visibility in bright conditions, making them easy to read at a distance. Adding to the already long list of improvements, the PowerPlasma 52i, now has a gouge feature and a separate mode for CNC use. The blow-back torch design features two pilot arc modes, one with continuous re-light for cutting expanded metal and for conditions where continuity is not ideal, and the other which features a tip saver function that limits pilot arc on time to preserve consumable life. PRODUCT EXTRAS Features & Benefits: Dual Voltage 120/240V for maximum portabilityAdjustable Post-Flow timer extends consumable and torch lifeLarge, Super bright digital displays for Amps, Air Pressure, and Post FlowDigital Air Pressure Setting Guide adapts programming for different cutting modesSeparate Gouge and CNC modes.Euro style "Central" quick connect torch adapterImproved Consumable lifeFeatures the Italian designed "back striking" iPT 60 torch with improved cutting capacity and improved consumable lifeInexpensive consumables can usually be bought locally60% duty cycle is fit for commercial useClean cuts and less bevel with the iPT 60 torch and new digitally controlled cutting arc.Self-Diagnosing mode (Error Code)Consumables in Place Indicator.Pilot arc tip saver feature limits pilot arc activity to 3 seconds. Continuous Pilot arc mode is standard as well.Can be used with 8500 watt clean power generators (less than 5% total harmonic distortion) WHAT'S INCLUDED Standard Equipment: 15ft. Italian designed and patented iPT-60 torch with Euro quick-connect central adapterWork clamp with 10ft. cable and DINSE connectorAir pressure regulator/water trap (Separate air dryer is required to reduce consumable wear and prevent torch damage)Consumable starter kit120V/240V pigtail adapter OPTION Optional Equipment: iPT 60 CNC torchWelding cartConsumable kit RECOMMENDED USES Recommended Areas of Use: Home/HobbyMetal ArtFarm/RanchContstruction sitesPortable RepairFabricationSmall CNC tables with 1/4" or less capacity is needed continuouslyAnywhere Oxy Fuel cutting is impractical, slow, expensive, or otherwise restricted or undesirable.Recommended Metals: SteelStainlessAluminumTitaniumVirtually any metal including cast iron TECH SPECS Type: IGBTVoltage/phase: Dual Voltage 120/240 1 PhaseOutput Amp/Volt Range: 120V: 20A/88V-25A/90V240V: 20A/88V-50A/100VOCV: 200VMax Inrush ( I1MAX ) Amps: 120V: 32.1A240V: 35.8AMaximum Rated (I1EFF ) Input Amps: 120V: 24.9A240V: 27.9ADuty Cycle At Rated Amps/Volts: 120V: 60% @ 25A/90V240V: 60% @ 50A/100VArc Start Type: Blow Back (Piston type)PilotArc: YesTorch Type: Italian designed iPT 60CNC Interface Port: YesAdjustable Post Flow Timer: YesGouging: Not RecommendedRecommended Cutting Air Pressure: 72-75 psiRecommended Compressor Capacity: 5.0 cfm or better with 25 gallon tankOK-to-Cut Indicator/Low Air pressure safety: Yes NOTES Notes: When using the CNC port, with a plasma table, the unit should be limited to 40 amps which is the 100% duty cycle level of the machine if it is to be used continuously.A separate air dryer must be provided by the customer to prevent torch damage, and excessive consumable wear.The unit includes a regulator/water trap, but is not designed to remove all water or moisture. When used with a generator, the generator must be certified by its manufacturer to produce "clean" power (5% or less THD). Use a generator rated for 8500 surge watts if used on 240V. For 120V, a generator with a minimum of 4500 watts should be used.For use with 120V, the cutting tip (nozzle) must be changed to a smaller diameter nozzle for proper operation under 40 amps. Lowering air pressure will destabilize the arc. MINIMUM/MAXIMUM Up to 1/2" daily use @ 15-20 ipm (240V)Up to 3/4" clean cut @ 8-12 ipm (240V)Up to 15/16" severance cut @ 3-5 ipm (240V)Up to 1/8" daily use @ 15 to 20 ipm (120V)Up to 3/16" clean cut @ 8 to 12 ipm (120V)Up to 5/16" severance cut @ 3-5 ipm (120V)Max. Pierce 3/8" (240V)Max Pierce 3/16" (120V)Minimum practical cut 24-28 gauge with standad cutting tipsPlasma cutting capacity is affected by several factors. Ideal cutting conditions require dry air, new consumables, proper air pressure etc. Quality of cut depends upon consumable orifice size, standoff height, and travel speed. Reduce consumable orifice size for best quality cuts on thin metals. Units are shipped with starter kit of consumables designed for 40-50 amps cutting range. Minimum cutting gauge is virtually unlimited, but kerf will be too wide if standard cutting tips are used. For best results, use a smaller diameter orifice for lighter gauges. Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. DOA items: In the event you receive a non working unit , we will exchange it free of charge. Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines. 2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. We will not ship to a PO Box. 4- Shipping charges are for the (48) Continental United States only. 5- We don’t ship to Canada 6- We charge CA tax on all orders 9.5% 7- If you pay via PayPal, shipping will be to your confirmed address only 8- Shipping to AK, HI and PR is more. please email for price. Contact Operating Hours: Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)

Price: 959 USD

Location: Daly City, California

End Time: 2024-07-22T22:33:17.000Z

Shipping Cost: 40 USD