PID KIT for Gaggia Classic Pro 2018+, Brew, Steam & Pre-infusion

Description: Update: This kit is compatible with the newly released Gaggia Classic Pro 2018/2019 models, including the US version (RI9380, 120V) and the European version (RI9480, 230V)! For older European version of Gaggia Classic 2015 (RI9403, 230V) please check KIT-GGX-EU. If you want to defeat the auto-turn-off feature in Gaggia Classic Pro European model (RI9480, 230V), one extra piece of wire is needed. Please contact seller This PID controller kit is designed to retrofit into the Gaggia Classic Pro, Gaggia Classic, Gaggia Coffee, and Gaggia Coffee Deluxe espresso machines. With a PID controller added to the heater control circuit, brew water temperature can be controlled to within ±1 F° accuracy. Thus, it will significantly improve the taste of your espresso. Users can also easily adjust the brew water temperature to suit their own tastes. This pre-infusion kit also has addition features of pre-infusion and steam temperature control. The kit includes Custom manufactured PID temperature controller with parameters set for the machine. Bright anodized (or black for Gaggia Coffee) aluminum box with mounting slot pre-cut and wiring hole sealed with rubber grommet. Solid state relay with mounting hardware and heat conductive paste. Platinum RTD temperature sensor with tip made for the thermowell on the machine High temperature resistant wires, color coded, cut to length and terminated with proper connectors Digital version installation guide and operation manual with text and photos To install the kit, users will need the following: Basic knowledge of electronics wiring and safety Screw driver, pliers, a socket wrench and small amount of alcohol. 30-60 minutes of time. No need for special tools. No need to learn how to set up the PID controller (usually, this is the most challenging part of the project for espresso drinkers with little electronics background). Unique features The PID controller in this kit is specifically modified for home espresso brewing applications. Two additional parameters are included to balance the requirements of cold start speed, shot recovery speed and long term stability. This is a different controller from our universal controller SYL-1512. The platinum RTD temperature sensor used has greater accuracy and long-term stability than thermocouple sensors. Temperature variations within the controller’s environment will not affect the accuracy of its reading. In addition, the sensor is built inside of a screw and will fit into the existing thermowell for the coffee thermostat All the cables in the kit have higher temperature endurances than the original cables used by the manufacturer. We use color coded cables with either fluoropolymer or silicone insulation. This will prevent the potential electrical shock caused by PVC insulated wires touching the boiler during operation.The steam temperature is controlled by the same controller that controls the brew water temperature. To the user, the operation is the same on the regular machine; no extra button is needed to press for frothing. When the steam switch is turned on, the on/off temperature of the heater is controlled to 1 degree (F or C) difference as compared with original thermostat's >10C (or 20F) difference. With this tight temperature control, you do not have to surf the temperature for frothing because the heater will kick on much sooner than the original thermostat. The on/off temperature can be adjusted by the user. The installation is completely reversible if you ever want to sell the machine or send it to service.This kit has pre-infusion timer. The pre-infusion is achieved by pumping a small amount of water into the coffee, holding off the pump for a second to let water soak in, then starting the 25 second pumping. This will prevent high pressure water making contact with the dry coffee powder that can create a fast flow channel, ruining the brewing process. It will improve the consistency of the brewing even if you didn't tamp the coffee perfectly. The countdown extraction timer contains three segments: pre-infusion pulse (Tp), soak (Td), and brew (Tb). Each segment can be set by user with 0.1second resolution. When the ">" key is pressed, the controller starts the brewing sequence automatically. The pump can be stopped at any time by pressing the ">" key a second time. This feature allows you to operate the brew pump manually, with the timer as a reference. User can also bypass the timer to use the switch on the machine for manually controlling the brewing process.By default, we ship Fahrenheit version to US customers, Celsius version to international customers. Please send a message to seller for questions. The pre-infusion timer can also be used as countdown shot timer. User needs to disable Tp, Td, and only uses Tb as shot timer to pump a specific time. Silver aluminum controller box is included in this kit. The silver box is coated with clear anodized aluminum with a brush finished stainless steel front panel. It is suitable for Gaggia Classic or other machine with silver paint. Red and white colored LED display option is offered. It will give the machine an cool look. Please check the display color option at the top of this page. The kit works for 115 VAC and 240VAC. The default PID parameter setting is for Fahrenheit units for order shipped within US. Order shipped outside of US will be set for Celsius. Please specify if you want it changed. 6 months warranty and 30 days money back guarantee is offered.Note 1: Gaggia Espresso machine is not included in this listing. Note 2: This kit fits the Gaggia Classic Pro (RI9380 120V, RI9480 230V) that was released in late 2018 and early 2019, Gaggia Classic & Home which has the traditional Gaggia aluminum boiler, including 14101, RI8161/40 and RI9303 models. This kit doesn't fit the new European model RI9403, which has a stainless steel boiler with a different thermostat mounting. For RI9403, please check KIT-GGX-EU.*Shipping note for international/non-US customers: The default international shipping method for this listing is FedEx or DHL. Estimate delivery time is about one week. Please provide your physical address and correct contact information for the package delivery (physical address is needed). For customers in remote/rural area, to avoid remote area delivery surcharge, we will ship your order out by USPS instead automatically (US postal service). It will be delivered about 1-2 weeks to Canada, 3-4 weeks to other countries. For special inquiry regarding our international shipping, please contact us.

Price: 209.99 USD

Location: Alpharetta, Georgia

End Time: 2023-09-23T17:59:22.000Z

Shipping Cost: N/A USD