Description: #1 SELLER PREMIUM CUSTOMER SUPPORT SHIPPING WORLDWIDE 2 YEAR WARRANTY EASY TO INSTALL UNDETECTABLE PearTune MSO 4.0 for Giant Syncdrive Pro2 / Sport2 + RideControl GO Works with Giant Syncdrive Pro 2 and Syncdrive Sport 2 drive systems from model year 2022 with displays Ridedash Plus, Ridedash Plus 2, Ridedash Evo or Ridedash 2 in 1 along with control units GO+, Ergo, Ergo 2 or Ergo 3. Compatible with Giant engines from 2022 with RideControl Go Unlock the full potential of your ebike! You will ride faster and experience the thrills of owning a derestricted ebike -you will love the difference! Install it effortlessly- quick plug-and-play connection - no setup required. Feel safe for your e-bike and warranty- it's safe for ebike and undetectable to keep your warranty safe! Quick plug-and-play installation. No setup! Increase the speed limiter from original 16 mph (25km/h) to unlimited speed! See accurate speed on your ebike display! Enable/disable when needed! Just press WALK or '+ - + -' buttons Get after-sales support from us and a 2 year warranty from Peartune! The bike feels completely different once derestricted - it's just like a whole different bike! The rides are so much more fun now! Tuning kits are safe to your bike and every ebiker should have one installed! You will love riding your ebike with it - guaranteed! Matt - Owner of Two Wheels Empire Product details What does this Tuning Kit do? The PearTune MSO 4.0 is a revolutionary tuning kit that suppresses the speed limiter of your electric bike. After installing and activating your PearTune, the display will show actual values such as maximum speed, average speed, daily distance traveled, and range. You can reach unlimited speeds. The display is not necessary to enjoy your new speed limit with PearTune. Once activated, the tuning kit supports speeds up to 99 km/h (approximately 61.5 mph)! To be able to use all the functions of the tuning, the display of the total kilometers and the speed is required. If your e-bike does not have a display, you can retrofit the Ride Dash Plus, for example. NOTE: Do not use the Ride Control app as a display, as this app may prompt you to update the software. How does Peaturne Work? The tuning kit manipulates the speed signal without altering the motor's power relative to pedaling speed. This ensures smooth motor control without interruptions from speed limits. However, the achievable speed largely depends on the eBike model. The achievable speed can be calculated using a simple formula: Speed = Cadence [rpm] * Wheel circumference [mm] * Front Chainring Teeth / Rear Chainring Teeth * 60 [min/h] / 1,000,000 [mm/km] The tuning kit can be activated directly on your bike’s controllers. After pressing the activation buttons, you will be able to ride at speeds of 25 mph (40 km/h), 31 mph (50 km/h), and even more than 37 mph (60 km/h). Activation involves one short press of the WALK button and/or the [+ - + -], [- + - +], [+ + - -], or [- - + +] / (↑ ↓↑ ↓) buttons. Indication of activation/deactivation is a displayed number, 9.9/2.5 kph for a few seconds (or equivalent in mph). To deactivate the tuning kit, press the same buttons again. Your e-bike will then operate as it did before the chip's installation. With the new PearTune 4.0, you have greater control over your tuning kit than ever before. It offers features such as: Adjustable speed limit in preferred range settingsChip lock settingsOn/Off or always ON settingsTraveled distance calculation settingsChip reset settingsPreferred button for activation/deactivation settingsChip software version information settingsHow to use Peartune service menu? ServiceMenu: https://cdn.shopify.com/s/files/1/0051/1515/0434/files/PearTune_MSO_manual_for_Service_menu_of_the_chip_EN_2024-01-05.pdf?v=1704438829 By default, PearTune MSO 4.0 is set to activation/deactivation mode. The maximum speed is on unlimited settings, and activation/deactivation can be done by pressing the WALK button or [+ - + -] (starting from the highest assistance level, begin with [-]). To change settings to your preference, download the latest chip service menu and follow the CHIP SERVICE MENU CONTROL PROCEDURE to enter the desired section. If you need any help adjusting your settings, feel free to contact us. We're here to assist every step of the way. Is this Peartune the right tuning kit for my bike? Compatible with:Giant Syncdrive Pro 2 and Syncdrive Sport 2 drive systems from model year 2022 with displays Ridedash Plus, Ridedash Plus 2, Ridedash Evo or Ridedash 2 in 1 along with control units GO+, Ergo, Ergo 2 or Ergo 3. Not Compatible with:Original Yamaha PW-X3 / PW-S2; you would need PearTune 4.0 for Yamaha PW-X3 / PW-S2 motors precisely. How to install this tuning kit? When connecting the PearTune tuning kit to an e-bike, you will find matching connectors to make the installation very simple. If you are planning to install Peartune on a brand-new bike, make sure you ride it for at least 0.6 miles (1 km) before the chip is activated. 1. Remove the plastic cover of the central drive from below. Connectors and cables are located under the engine. 2. Disconnect the eight-pin connector between the display and the engine body and the three-pin connector between the speed sensor and the engine body. 3. Connect all four corresponding connectors on the MSO to the corresponding connectors on the e-bike. All connectors are equipped with locks to prevent incorrect connections. 4. Place the MSO in a suitable position, ensuring that cables are not bent or pinched when closing the motor. If you encounter any difficulties with installation or disassembly, do not hesitate to contact us. Important legal note Please note that the operation of this type of modified electric bikes on public roads may be against the law in some countries. The manufacturer takes no responsibility for damages resulting from the use of Peartune products. Electric bikes equipped with Peartune products are not allowed to be used on public roads, cycling paths and public places. Electric bikes equipped with Peartune products can be used exclusively on private property and entirely at one’s own risk. The use of Peartune products may void the warranty of your ebike. We strongly recommend using other safety features and protective gear to prevent injuries in higher speeds. Peartune products are thoroughly tested and we stand by their quality - Peartune provides 2 years warranty to all their products.
Price: 244 USD
Location: Kaunas, Kaunas
End Time: 2024-11-13T13:19:09.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Manufacturer Warranty: 2 years
Number of Items: 1
Custom Bundle: No
MPN: PT 1.0
Compatible Model: Giant Reign E+, Giant Trance (advanced) X E+ 2022+
Compatible Bike Type: Universal, E-Cargo Bike, E-City Bike, E-Cross Bike, E-Folding Bike, E-Mini Bike, E-Mountain Bike, E-Recumbent Bike, E-Tandem Bike, E-Trekking Bike, E-Tricycle
Item Width: 0.8 in
Voltage: 12 V
Unit Type: Unit
Item Length: 1.4 in
Item Height: 0.35 in
Product Type: E-Bike Tuning Kit; Chip; Dongle
Country/Region of Manufacture: Czech Republic
Material: Composite
Colour: Black
Energy: Non
Model: PearTune for Giant Ride Control GO
Item Weight: 0.67 oz
Compatible Brand: Yamaha
Maximum Speed: Motor Support up to 61mph (99kmh)
Unit Quantity: 1
Brand: Giant
Color: Black
Set Includes: Tuning Kit
Battery Capacity: No Battery
Part Type: E-bike; E-MTB; E-Mountain Bike;
Battery Type: No Battery
