NEW Femto LCA-S7 Low Noise Transimpedance Current Amplifier DC-200kHz 10kV/A MCT

Description: NEW Femto LCA-S7 Low Noise Transimpedance Current Amplifier DC-200kHz 10kV/A MCT This is a customized OEM version of Femto's LCA series low noise current amplifiers. These are new old stock and we've individually tested them to verify functionality. Used as a transimpedance amplifier for current sources such as photodiodes. Datasheet included with each unit. Also marked with LGR (Los Gatos Research?) PN 112-0006-0004. As best I can tell, the customization on these is the addition of a -100mV bias voltage on the input BNC intended for use with Judson Photovoltaic MCT detectors and an external offset compensation input on the power connector. In testing here I found that it is possible to increase the reverse bias for PIN photodiodes requiring more than 100mV by connecting the cathode to a positive voltage rather than ground. Increasing the reverse bias voltage in this way does not add any appreciable offset at the output. These need a low-noise ±15V DC power source. We're offering these in 3 configurations - With or without the LEMO power connector or with a pre-wired power supply to get you up an running quickly. Note that these use a 5 conductor LEMO connector which is different from the 3 conductor type used on Femto's standard models. Features Transimpedance (Gain) 10 kV/ABandwidth DC - 200 kHz Low Equivalent Input Noise Current of 3.8 pA/√Hz-100 mV Bias Voltage at Input Center Pin Applications Photodiode Amplifier for MCT - Mercury Cadmium Telluride (HgCdTe) detectors for mid-IR light Photovoltaic Detector Specifications (Test Conditions: Vs±15 V, Ta = 25°C) Transimpedance: 10kV/A (@ > 100 kΩ Load) Accuracy: ±1% Frequency Response Lower Cut-Off Frequency: DC Upper Cut-Off Frequency (-3 dB): 200 kHz (±10%) Max. Source Capacitance: 1 nF (incl. cable, e.g. typical coax cable 1 pF/cm) Rise-/Fall-Time: 1.7 µs (10%-90%) Input Equ. Input Noise Current: 3.8 pA/√Hz (@1 kHz) Equ. Input Noise Voltage: 5.1 nV//√Hz (@1 kHz) Equ. Integrated Noise: 18 nA peak-peak Input Bias Current: 5 pA typ. Input Bias Current Drift: factor 1.7/10 K Offset Current Compensation: ±100 µA, adjustable by offset-trimpot External Offset Current Comp.: ±10 µA, adjustable by control voltage (LEMO pin 4, 5. ±5 V is equivalent to ±100 µA offset current) Offset Control Input Impedance: 27 ΚΩ Input Current Range: ±1 mΑ Input Offset Voltage: - 100 mV (±5%) BIAS for MCT DC Input Impedance: 50 Ω (Virtual) || 5 pF Output Output Voltage Range: ±10 V(@ >100 kΩ Load) Output Impedance: 50 Ω (terminate with >100 kΩ for best performance) Max. Output Current: ±20 mA (Linear Amplification)Power SupplySupply Voltage: ±15 VSupply Current: ±20 mA typ.CaseWeight: 210 g (0.5lb)Material: AIMg4.5Mn, nickel-platedTemperature RangeStorage Temperature: -40 ~ +100COperating Temperature: 0~+60CAbsolute Maximum RatingsInput power: ±5 VPower Supply Voltage: ±22 VOffset Control Voltage: ±12 VConnectorsInput: BNCOutput: BNCBias Voltage Output: center pin of BNC input socketPower SupplyLemo series 1S. 5 pin fixed socket (see drawing)Pin 1: +15VPin 2: GNDPin 3: -15VPin 4: external offset control port, apply positive voltagePin 5: reference for Pin 4 Attention: When switching the amplifier on or off a voltage spike of up to ± 600 mV may appear at the amplifier input which could damage sensitive detectors connected to the input. It is recommended to disconnect any detector from the input before switching the amplifier on or off. Pictures and description Copyright © 2023 Starlight Photonics Starlight Photonics Policies About Us We are a small company located in the heart of Silicon Valley. We specialize in surplus lasers and photonics and have an optics lab with many instruments such as power meters, laser diode drivers and optical spectrum analyzers. Combined with our considerable expertise, this allows us to test most of the items we sell so you can be confident that they will arrive in good working condition. FDA Disclaimer for Laser Components This product is sold solely for use as a component (or replacement) in an electronic product; therefore it is not required to, and does not comply with, 21 CFR 1040.10 and 1040.11 which pertain to complete laser products. The manufacturer of the complete system-level electronic product is responsible for complying with 21 CFR 1040.10 and 1040.11 and for providing the user with all necessary safety warnings and information. Payment and Sales Tax Order payments are handled by eBay Managed Payments which allows a variety of option such as credit, debit, and gift cards, Apple Pay, Google Pay, PayPal, and PayPal Credit. We accept Purchase Orders from accredited Universities but generally require pre-payment. Please note that sales tax is collected by eBay, not by us. If you are purchasing for resale, you need to have your reseller certificate on file with eBay before placing your order. Shipping Most orders ship within 24 hours of payment. We take pride in our careful packing of delicate items. In the unlikely case that you receive an item which has been damaged in shipping, please hang on to the packing material and contact us. We will file a damage claim with the shipper and start the process of getting you a replacement or a refund. Warranty Items we sell on eBay do not include any warranty unless otherwise specifically stated in the listing. We do guarantee that the items we sell will be delivered in the condition described in the listing. If you have a problem with your purchase, please get in touch and we'll do our best to resolve it. Return Policy Most electronic items we sell may not be returned unless the package is unopened. Please read the listing carefully, do your research and ask us any questions you need to decide if the item is suitable for your use. All returns must include all of the original accessories, paperwork and packaging. Shipping charges are not refundable and opened packages will incur a fee to cover testing and restocking the item. Returns which are not resalable due to missing parts, damage, alteration, etc. will not be refunded. International Sales Import duties, taxes, and other charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. Company Information Starlight Photonics PO Box 1134 Alviso, CA 95002

Price: 139 USD

Location: Alviso, California

End Time: 2024-02-23T19:11:04.000Z

Shipping Cost: 0 USD