NEW! Cordless Handheld Concrete Vibrator with Battery & Battery Charger 29000rpm

Description: NEW! Cordless Handheld Concrete Vibrator with Battery & Battery Charger 29000rpm Description Our concrete vibrator is made of PC, which has high strength and high impact resistance, ensuring a long service life. Its 850W high power and powerful all-copper motor make the concrete vibrator rotate faster up to 29000rpm/min, so it can quickly finish mixing concrete. It will be a powerful assistant in your work. Key Features Long Endurance: The 4000mAh lithium battery provides 1 hour of battery life, fully meeting the needs of outdoor work, avoiding frequent charging, and making the charging time shorter (4 hours). User-friendly Design: This product is battery powered, reducing gasoline consumption, to some extent protecting the environment, and saving you costs. Build to Last: The exquisite PC, rubber, and copper endow the product with excellent corrosion, impact, and wear resistance, providing stable and good performance even in harsh outdoor environments. Good performance: The 850W pure copper motor with less noise, 29000rpm speed, 0.03inch vibration amplitude, and stable structure ensure perfect uniformity of concrete, providing a smooth and uniform surface, removing air pockets in concrete, increasing concrete density, saving concrete volume, thereby improving the strength and efficiency of the entire construction process. Safety Guard: The multiple heat dissipation holes on both sides of the handle and extended copper cables can effectively ensure safety during operation, so you can use it with confidence. Comfortable Experience: The ergonomic handle provides a firm and comfortable grip, which can reduce hand fatigue caused by long hours of work. Easy to Operate: The one-click switch allows you to directly use the product. The 13.8-inch rubber flexible shaft allows you to have sufficient activity space in different projects. Easy to Carry: The detachable and cordless design, and lightweight (11.0 lbs) make it easy to carry, and you can easily take it anywhere. Protective Packaging: The bubble bag and rigid cartons protect the products from wear and impact during transportation, thus ensuring that the product is delivered to you completely to the greatest extent. Customer Service: We aim to provide the service that will satisfy you as much as possible. If you have any questions, please feel free to contact us, we are willing to answer your questions. Details Round Connector: The round interface is tightly connected to the vibrator, making it stronger to use and easier to operate. Long Hose: The 3.28ft hose has high strength and good wear resistance, which can withstand long-term vibration and provide more convenience for your operation. Power Indicator Light: When the product is charging, the red light will light up, and when fully charged, the green light will light up for you to check in a timely manner. Application It is suitable for restoration, concrete columns, grape frame casting, road construction, fence construction, bridge construction, tunnel construction, port construction, airport construction, house construction, construction sites, engineering industry, renovation industry, etc. How to Use Step 1. Take out the shaft and motor. Step 2. Insert the shaft of the motor into the connecting shaft. Step 3. Tighten it according to the direction of the thread. Step 4. Knock the vibrating bar on the ground several times. Specification Shell Materials: PC, Rubber, Copper, Steel Hose Material: Rubber Motor Type: All-copper Motor Color: Green Plug Type: US Standard Assembly Required: Yes Mount Type: Free Standing Power Source: Battery Style: Modern Number of Items: 1 Model: TZ-C30AE Rod Head Diameter: 35mm/1.37inch Rod Core Diameter: 10mm/0.29inch Vibration Range: 300mm/7.87inch Rotational Speed: 29000 rpm Vibration Amplitude: 0.8mm/0.03inch Power: 850W No-loading Current: 3.7A Charger Output: 21-98V, 1000mAh Duration: 1 Hour Charger Input: 100-240V, 50/60Hz, 1.0A Battery Type: 1* 21V 4000mAh Lithium Battery(Included) Full Charge Time: 4 Hours Total Hose Length: 100cm/3.3ft Metal Tube Length: 45cm/17.72inch Rubber Length: 55cm/21.6inch Product Size(H*W): 35*10.5cm/13.8*4.1inch Package Size: 32*9*65cm/ 12.6*3.5*25.6inch Gross Weight: 6.5kg/14.3lbs Net Weight: 5kg/11.0lbs Package Included 1 *Concrete Vibrator 1 *Vibrating Hose 1 *Battery 1 *Battery Charger 1 * Chinese Manual NotesPlease take personal protection measures and keep the product away from children.Do not stop the vibrator motor when the needle is submerged, as pulling it out will be difficult. Do not allow the vibrating needle to run in the air as it will overheat. The needle can only be effectively cooled when immersed in concrete. Hold the needle with the rubber sleeve wrapped around it to prevent excessive bending of the hose. Excessive bending causes friction and makes the hose more likely to overheat. Therefore, always keep the hose as straight as possible when operating. After using it for a period of time, the vibrating rod should be checked to see if the threaded connection of the rod head is loose to prevent mortar water from seeping into the vibrating rod and causing it not to vibrate.After the power is turned on, if the concrete vibrator does not produce vibration, you can generally knock the end of the concrete vibrating rod to the ground, and after the vibrator makes a smooth and powerful chirping sound, you can carry out the pounding operation. The vibrating rod pounding time should not be too long, too long will appear concrete and cement separation, stone sinking phenomenon, and the formation of a sand layer on the surface of the concrete, vibrating rod tilt concrete surface, should be low, and slowly move to high, to ensure that the vibration is dense.The vibrating rod should be vertical straight up and down, and the operation of the vibrating rod should make the vibrating rod fast insertion and slow extraction (eliminate holes), when the end of the vibrating rod is about to reveal the concrete surface, to quickly pull out the vibrating rod, pull out the non-stop rotation, so as not to cause a hole, and the insertion point should be evenly distributed (between 300-400), do not miss the point plugging (lack of vibration), up and down to pump, keep the concrete vibrating rod in motion (50-100mm, so that the concrete is dense) to layer buckle lap.Do not expose the tool to rain. Do not use power tools in wet or damp areas, keep the work area well-lit, and do not areas where there is a risk of fire or explosion, and do not use power tools in areas where there is a risk of fire or explosion.The use of a vibrating rod to strike the upper layer of concrete should be carried out before the initial setting of the lower layer of concrete. Each insertion point should have a precise vibration time. If the time is too short, it will cause difficulty in compaction, and the time should be between 20 and 30 seconds. The appropriate time should generally depend on whether the concrete surface is level and should be based on the absence of obvious settlement, bubbles, and surface immersion mortar.The vibrating rod insertion point should be evenly arranged, and can use the 'row type' or 'staggered' order of movement, but can not be mixed. The distance of each moving position should be no greater than 1.5 times the radius of action of the vibrating rod. The vibrating rod should not be bent more than 500MM.After working continuously for half an hour, the vibrating rod should stop for a while to prevent the machinery from heating too much and damaging the machine parts. After every 50-100 hours of use, the vibrating rod should be disassembled all the parts inside the rod for cleaning. When disassembling, you can unscrew the tip and the hose joint (both left screws), and then use a wooden top sharp hammer to tap the cone of the large diameter end of the outer extension, take out the cone and the bearing, oil seal, etc. Then remove the hose connector (right screw), you can remove all the parts. When not using the vibrator, please keep it dry and do not add any oil to it, and it is necessary to pump out the concrete before shutting down the machine to extend its service life. Please ensure that the lithium battery has been charged for 12 hours before use and unplug it after fully charging. During operation, the product should be inserted vertically or at an angle of 15-45 ° into the concrete.After cleaning, replace the damaged parts and reinstall. Except for the bearings, all parts must be cleared of oil. The cone surface of the rolling cone and the casing should be guaranteed to be oil-free.The vibrating rod does not touch:The vibrating rod vibrates when not touching the template, concrete vibration from the high template should not be greater than the concrete vibration radius of action 0. 5 times, and can not be close to the marble plate.The vibrating rod vibration holds when not touching the reinforcement.The vibrating rod vibration does not touch the pre-built parts. The vibrating rod in close proximity to the template pounding should be used at the same time with a wooden coarse gently knocking mold Board, in the reinforcement dense place, and template corners should be with the iron brazier pounding. Please allow the slight color difference caused by the shooting light and 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.If you have any question , please contact us , and we will reply you as soon as possible.PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.Feature 1Creative Design，Durable Material，Beautiful AppearanceFeaturestable performance,Safe to UseFeaturesEasy installation,Compact DesignFeature 3Easy OperationFeature 2Convenient UseTypeConcrete VibratorShell MaterialsPC, Rubber, Copper, SteelHose MaterialRubber Motor TypeAll-copper MotorColorGreenPlug TypeUS StandardAssembly RequiredYesMount TypeFree StandingPower SourceBatteryModelTZ-C30AERod Head Diameter35mm/1.37inchRod Core Diameter10mm/0.29inchVibration Range300mm/7.87inchRotational Speed29000 rpmVibration Amplitude0.8mm/0.03inchPower850WNo-loading Current3.7ACharger Output21-98V, 1000mAhDuration1 HourCharger Input100-240V, 50/60Hz, 1.0ABattery Type1* 21V 4000mAh Lithium Battery(Included)Full Charge Time4 HoursTotal Hose Length100cm/3.3ftMetal Tube Length45cm/17.72inchRubber Length55cm/21.6inchProduct Size(H*W)35*10.5cm/13.8*4.1inchPackage Size32*9*65cm/ 12.6*3.5*25.6inchGross Weight6.5kg/14.3lbsNet Weight5kg/11.0lbsBrandUnbrandedMPNDoes not applyCountry/Region of ManufactureUnknownOn Nov 7, 2024 at 18:39:44 PST, seller added the following information:

Price: 74.15 USD

Location: Chino, California

End Time: 2024-11-29T07:13:20.000Z

Shipping Cost: 0 USD