Leviton

Multi-function Finger Pulse Oximeter SpO2 Blood Oxygen Saturation Monitor CONTEC

Description: MODEL 1:CMS50M LED 1.Introduction CMS50M Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50M Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc. 2.Features 1) Can measure SpO2 and Pulse Rate accurately 2) SpO2 and Pulse Rate display,bar graph display 3) Battery voltage low indication 4) Shut off automatically when no signal 3.Performance SpO2 measurement range: 0%~100% Accuracy: 70%~100%: ±2% 0%~69%: unspecified PR measurement range: 30bpm~250bpm Accuracy: ±2bpm or ±2%, whichever is greater. Resolution: SpO2: 1% PR: 1bpm Measurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater. Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%. Working current: ≤25mA Power supply: two “AAA” batteries Safety classification: type BF applied part MODEL 2:CMS50N OLED 1.IntroductionCMS50N Pulse Oximeter is a portable equipment adopting advanced technology, it mainly checks SpO2 and PR value through the finger, which provides advanced, non-invasive and scientific means for quantitative measurement of oxygen saturation. CMS50N Pulse Oximeter is applicable for use in plateau area, community healthcare, oxygen bar, Fitness clubs, physical training room, family and medical institution, etc. 2.Features1) Can measure SpO2 and Pulse Rate accurately2) SpO2 and Pulse Rate display,Pulse Rate waveform and bar graph display 3) Battery voltage low indication4) The display mode can be changed.5) Screen brightness adjustable3.PerformanceSpO2 measurement range: 0%~100%Accuracy: 70%~100%: ±2% 0%~69%: unspecifiedPR measurement range: 30bpm~250bpmAccuracy: ±2bpm or ±2%, whichever is greater.Resolution: SpO2: 1% PR: 1bpmMeasurement Performance in Weak Filling Condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2%, whichever is greater.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Working current: ≤30mAPower supply: two “AAA” batteriesSafety classification: type BF applied part Model 3:CMS50D-BT Wire Software RecordInstructionsThe Pulse Oximeter is as follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted in accordance with Capacity Pulse Scanning & Recording Technology,the Pulse Oximeter can be used in measuring the pulse oxygen saturation and pulse rate through finger.The product is suitable for being used in family, hospital, oxygen bar, community healthcare, physical care in sports (It can be used before or after doing sports, and it is not recommended to use the device during the process of having sport) and etc. Major FeaturesIntegrated with SpO2 probe and processing display moduleSmall in volume、light in weight and convenient in carryingOperation of the product is simple ,low power consumptionOperation menu for the function settingSpO2 value displayPulse rate value display, bar graph displayPulse waveform displayThe display mode can be changedA pulse rate sound indicationWith measured data overruns limits and low-voltage alarm function,the upper/down alarm range can be adjustableLow-voltage indication: low-voltage indicator appears before working abnormally which is due to low-voltage,and with alarm function With SpO2 value and pulse rate value of storage, the storage data can be uploaded to computersReal-time data can be transmitted to computersRF Wireless communication function(option)Connected with an external oximeter probe(option) Main performanceDisplay Mode: 0.96" Dual color OLED displayScreen Resolution: 128*64SpO2 Measuring Range: 0%~100%(the resolution is 1%)Accuracy: 70%~100%: ±2% ,Below 70% unspecified.PR Measuring Range 30bpm~250bpm, (the resolution is 1bpm)Accuracy: ±2bpm or ±2% (select larger)Measurement Performance in Weak Filling Condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2 bpm or ±2% (select larger).Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.Power Consumption: less than 80mAVoltage:DC 2.6V~3.6VPower Supply:1.5V (AAA size) alkaline batteries × 2 Battery working hour: The theoretical number is 32 hours.Safety Type:Interior Battery, BF Type Model 4:CMS50Ea 24H MonitorIntroductionThe CMS50E Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for being used in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising). Features1)Integrated SpO2 sensor and display module2)Small in volume, light in weight and convenient in carrying3)Easy to operate, low power consumption4)Operation menu for function settings5)SpO2 value display6)Pulse rate value display, bar graph display7)Pulse waveform display8)Display direction can be changed9)Screen brightness can be changed10)Pulse rate sound indication11)With measured data overruns limits and low-voltage alarm function, the upper/lower alarm limit can be adjusted12)Battery capacity indication13)Low-voltage indication: Low-voltage indication appears before working abnormal caused by low voltage.14)Data storage function, stored data can be uploaded to computer15)Data transmission in real-time16)Auto power off: Under measuring interface, the device will automatically power off after finger out within 5 seconds. Performance1)Display mode: 1.3" 65K color screen2)SpO2 measuring range: 0%~100% (resolution is 1%) Accuracy: 70%~100%: ±2%, Below 70% unspecified.3)PR measuring range: 30bpm~250bpm (resolution is 1bpm) Accuracy: ±2bpm or ±2% (whichever is greater)4)Measurement performance in weak filling condition:SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is ±2bpm or ±2% (whichever is greater).5)Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1%.6)Power consumption: no more than 100mA7)Voltage: DC 3.6V~4.2V8)Power supply: 3.7V rechargeable lithium battery × 19)Battery working hour: 20 hours in theoretical10)Battery service life: no less than 500 times of charge and discharge11)Safety type: Internally powered equipment, Type BF applied part Model 5:CMS50F external probe 24h MonitorIntroductionCMS50F Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for use in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising). Function1)Display of SpO2 value.2)Display of pulse rate and bar graph.3)Display of pulse waveform.4)Low-voltage indication: the low power indication symbol appears when the voltage is too low to work.5)Adjustable screen brightness.6)PR sound indication.7)Sound prompt function: over-limit prompt of measured value, probe-off or finger-out prompt, low power prompt.8)Data memory function.9)The data can be uploaded to the terminal equipment by wired mode.10)The data can be uploaded to the terminal equipment (Bluetooth wired equipment) by wireless mode.11)Clock function.12)Charging function. PerformanceSpO2 measurement range: 0 % ~ 100 % (resolution: 1 %)Accuracy: 70 % ~ 100 %, ± 2 %; 0 %~69 %, unspecifiedPR measurement range: 30 bpm ~ 250 bpm (resolution: 1 bpm)Accuracy: ± 2 bpm or ± 2 %, whichever is greaterAccuracy under low perfusion: low perfusion 0.4%, SpO2 accuracy: ± 4 %; PR accuracy: ± 2 bpm or ± 2 %, whichever is greater.Light interference: compared to the values measured in normal condition and ambient light condition, the deviation is less than ± 1 %.Power consumption: ≤ 100 mAWorking voltage: DC 3.6 V ~ 4.2 VBattery: one 3.7 V rechargeable lithium batteryBattery lifetime: ≥ 500 times (charge and discharge times)Safety class: internally powered equipment, type BF applied part AccessoriesOne SpO2 probeOne USB data lineOne User Manual Model 6:CMS60D+adult+child+neonate 3 probesIntroductionCMS60D Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology in accordance with Capacity Pulse Scanning & Recording Technology, which can be used to measure SpO2 and pulse by finger. It is applicable for use in hospital, oxygen bar, community healthcare and exercise healthcare(It can be used before or after exercise, but not recommended to use during exercising). Features1.Small in volume, light in weight and convenient to carry.2.Easy and simple to operate, low in power consumption.3.With function menu.4.Display of SpO2 value.5.Display of PR value and bar graph.6.Display of pulse waveform.7.Adjustable screen brightness, PR sound indication.8.Review function.9.Clock function.10.Audible prompt for over-limit and low battery.11.Battery status indication.12.Low battery indication.13.Storage function for SpO2 and PR values, and data stored can be uploaded to PC.14.Real-time data can be uploaded to PC.15.External SpO2 probe can be connected. PerformanceDisplay mode: color displaySpO2 measurement range: 0 % ~ 100 %(resolution: 1 %)Accuracy: 70%~100%: ±2%0%~69%: unspecifiedPR measurement range: 30 bpm~250 bpm(resolution: 1 bpm)Accuracy: ±2 bpm or ±2 %, whichever is greater.Measurement performance in weak filling condition: SpO2 and pulse rate can be shown correctly when pulse-filling ratio is 0.4 %. SpO2 error is ±4 %, pulse rate error is ±2 bpm or ±2 %, whichever is greater.Resistance to surrounding light: The deviation between the value measured in the condition of man-made light or indoor natural light and that of darkroom is less than ±1 %.Power consumption: ≤ 100 mAVoltage: DC 3.0 VPower supply: two AA batteriesContinuous working time: 44 hours in theorySafety class: internally powered equipment, type BF applied part Buy safe Products The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.If the item is subject to FDA regulation,We will verify your status as an authorized purchaser of this item before shipping of the item.If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health. The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved

Price: 8.99 USD

Location: Elk Grove Village, Illinois

End Time: 2023-09-12T03:22:46.000Z

Shipping Cost: 0 USD

Product Images

Multi-function Finger Pulse Oximeter SpO2 Blood Oxygen Saturation Monitor CONTEC

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Buyer

All returns accepted: Returns Accepted

Item must be returned within: 60 Days

Refund will be given as: Money Back

Oximeter Type: Pulse Oximeter with Probe

MPN: 69450401

Brand: CONTEC

Included Probe: Adult Finger Probe

Form Factor: Fingertip

Available Variations

Color: CMS50M Black

Price: 8.99 USD

Available Quantity: 982

Quantity Sold: 3

Color: CMS50M Blue

Price: 8.99 USD

Available Quantity: 820

Quantity Sold: 20

Color: CMS50M Grey

Price: 8.99 USD

Available Quantity: 1000

Quantity Sold: 0

Color: CMS50N Black

Price: 9.99 USD

Available Quantity: 982

Quantity Sold: 2

Color: CMS50N Blue

Price: 9.99 USD

Available Quantity: 1000

Quantity Sold: 0

Color: CMS50N Grey

Price: 9.99 USD

Available Quantity: 991

Quantity Sold: 1

Color: CMS50E+Software

Price: 79 USD

Available Quantity: 104

Quantity Sold: 11

Color: CMS50F+Software

Price: 92.5 USD

Available Quantity: 100

Quantity Sold: 0

Color: CMS60D+3 Probes

Price: 109 USD

Available Quantity: 100

Quantity Sold: 0

Color: CMS50D-BT Software

Price: 25.99 USD

Available Quantity: 101

Quantity Sold: 2

Recommended

Finger Pulse Oximeter Heart Rate Blood Oxygen Saturation Monitor SpO2 PR Measure
Finger Pulse Oximeter Heart Rate Blood Oxygen Saturation Monitor SpO2 PR Measure

$8.99

View Details
CE FDA Digital EKG ECG Machine 12-lead 1/3/12 CHANNEL Electrocardiograph CONTEC
CE FDA Digital EKG ECG Machine 12-lead 1/3/12 CHANNEL Electrocardiograph CONTEC

$269.00

View Details
CONTEC RS01 Respiration Sleep Monitor,Wrist Sleep Apnea Screen Meter + Software
CONTEC RS01 Respiration Sleep Monitor,Wrist Sleep Apnea Screen Meter + Software

$99.00

View Details
New Adult SpO2 Probe Reusable For CMS7000/CMS8000 Patient Monitor 2019 VERSION
New Adult SpO2 Probe Reusable For CMS7000/CMS8000 Patient Monitor 2019 VERSION

$29.99

View Details
FDA CMS8000 Vital Signs ICU CCU Patient Monitor,ETCO2 capnograph,Printer, Stand
FDA CMS8000 Vital Signs ICU CCU Patient Monitor,ETCO2 capnograph,Printer, Stand

$599.00

View Details
US ship CONTEC Ambulatory Blood Pressure Monitor+Software 24h NIBP Holter ABPM50
US ship CONTEC Ambulatory Blood Pressure Monitor+Software 24h NIBP Holter ABPM50

$149.00

View Details
Contec Compatible Direct Connect SpO2 Adult Clip CMS 8000 - Same Day Shipping
Contec Compatible Direct Connect SpO2 Adult Clip CMS 8000 - Same Day Shipping

$28.45

View Details
CONTEC Double-sided Stethoscope hand held auscultation head Sound amplifier New
CONTEC Double-sided Stethoscope hand held auscultation head Sound amplifier New

$7.99

View Details
CMS5100  CONTEC Patient Monitor ICU Vital Signs Patient Monitor NIBP Sp02 PR NEW
CMS5100 CONTEC Patient Monitor ICU Vital Signs Patient Monitor NIBP Sp02 PR NEW

$299.00

View Details
CONTEC ECG Workstation System,Portable 12-lead Resting PC based EKG Machine
CONTEC ECG Workstation System,Portable 12-lead Resting PC based EKG Machine

$276.99

View Details