MPPT 100A Solar Charger Controller 12V/24V Power Solar Regulator USB&LCD Display

Description: MPPT 100A Solar Charger Controller 12V/24V Power Solar Regulator USB&LCD DisplayWarm Reminders:•Shipping from NJ,US.•Strictly Quality Control,100% Brand new & high quality.•Offer delivery with Tracking Number.•Need 1 business day for Handing & Packing.•Package will arrive in 2-6 days for 48 contiguous states [ not for weekend and holiday]•60 Days Free Return for Any Reason 100A [MPPT] 12/24/36/48V Solar Charge Controller Feature: ✔ LCD Liquid Crystal Display: The solar charging controller adopts an LCD liquid crystal display with backlight display, which can be clearly and intuitively displayed in the dark, one-key operation of the panel keys can adjust various system control parameters, such as float charging voltage, boost charging voltage, light control and time delay, etc. ✔ Multiple Operating Modes: This solar charge controller has seven operating modes, such as charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode, among them, test mode is only available to the factory test. ✔ Large-section Wiring Port: use large-section, large-spacing wiring ports, can be installed 16mm wire, the wire spacing of 7mm increases the insulation performance and the reliability of installation, effectively reduces current and voltage drop while reducing losses. ✔ Dual USB Charging Ports: The solar charge controller adopts a dual USB charging port design, which can charge two devices at the same time, and supports most of USB port devices, such as mobile phones, tablets, PSP game consoles, etc. ✔ Thickened Aluminum Alloy Heat Sink: The MOS tube is used to lock the heat sink design, the heat dissipation is more uniform, and there is no fear of the temperature rise caused by the MOS tube, the powerful heat dissipation capacity can operate normally in the environment of 55 ℃, at the same time, it is equipped with functions to prevent overcharge, overvoltage, DC output low voltage, high voltage protection and reverse polarity protection, etc. Specification: Model: SY-12/24/36/48V100A Colour: Black Maximum charging current: 100A Maximum input voltage of photovoltaic panels: 23V (12V), 45V (24V), 69V (36V), 90V (48V) Maximum input power of photovoltaic panels: 1000W (12V), 2000W (24V), 3000W (36V), 4000W (48V) Output voltage: DC12V/24V/36V/48V; DC5V/1.5Ax2USB Working temperature: -25℃~55℃ Cooling method: heat sink self-cooling Charging method: Focused MPPT modulation charging Working mode: seven Protection function: prevent overcharge, overvoltage/DC output low voltage, high voltage protection, reverse polarity protection, etc. Product size (L*W*H): 195*183*68mm/7.68*7.20*2.68inch Package size (L*W*H): 205*205*70mm/8.07*8.07*2.76inch Package includes: 1 x Solar Charge Controller 1 x Manual 1 x Packing Box 10/30/60/80A/100A MPPT Orange Solar Charge Controller Advantage: - Advanced maximum power point tracking (MPPT/PWM) technology, the efficiency is not less than 99.5%. High-quality components improve the system performance, and the maximum conversion efficiency is 98%. Super fast tracking speed and guarantee tracking efficiency. - Large screen LCD display, charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. - Dual USB output, the maximum current is 2.5A. Equipped with all necessary protection devices, the control parameters of the system are adjustable, easy to set up and operate. Built-in overheating, overcurrent, short circuit, open circuit protection, fault elimination, controller automatic recovery. Two-way MOS tube anti-backflow circuit, high-power charging mode, ultra-low heat. - Built-in short circuit protection, open circuit protection, reverse connection protection, overload protection. Reverse current protection, low calorific value, with self-recovery function, will not damage the controller. - Real-time display of temperature, charging current and discharge current. Current autofocus MPPT tracking charging, high charging efficiency, charging process does not stop detection, two-way focus tracking. Features: -Build- in industrial micro controller. -Big LCD/LED display ,charge and discharge current display, cumulative power generation and discharge power query, temperature display, light control + delay control; adjustable charge and discharge parameters, with power-off memory and other functions. -Fully 3-stage charge management ,PWM battery charging as well as MPPT solar charge controller. -Build -in short-circuit protection ,open-circuit protection,reverse protection,over-load protection. -Dual USB output,the maximum current of 2.5A,to support Apple’s mobile phone charging . -Dual reverse current protection ,low heat production. Specification: Rated voltage:12V/24V Charging Mode:PWM+MPPT Rated current :100A Max PV VOTAGE:50V Max PV input Power:360W(12V) 720(24V) colour: orange Material: Plastic size: 133x70x35mm/5.24”*2.76”*1.38” Display: LCD screen Self-consumption: <10MA Overcharge protection: 14.4V / 28.8V Overcharge Float charge: 13.7V / 27.4V Charge recovery voltage: 12.6V / 25.2V Over discharge protection: 10.7V / 21.4V Over discharge recovery: 12.6V / 25.2V Dual USB output: 5V / 2A (charge mobile phone, iPad, etc.) Working temperature: -35 ℃ -60 ℃ 12V fits 18V solar panel, 24V fits 36V solar panel 12.0 volt lead acid battery corresponding The float voltage is set to: 13.6 The recovery discharge voltage is set to: 12.6 The discharge cut-off voltage is set to: 10.7 12.8 volt lithium iron phosphate battery corresponding The float voltage is set to: 14.6 The recovery discharge voltage is set to: 13.6 The discharge cut-off voltage is set to: 11.0 11.1 volt lithium battery corresponding The float voltage is set to: 12.6 The recovery discharge voltage is set to: 11.6 The discharge cut-off voltage is set to: 9.6 The minute is adjustable when the output is turned off, which is more convenient (there is no adjustment when the market is only available). PV system power Description: 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 12V photovoltaic system: power is respectively 100-1000W 10A/20A/30A / 40A / 50A/ 60A /70A/80A/90/100A battery 24V photovoltaic system: power is respectively 200-2000W Package included: 1 x Solar Controller 1 x manual 30A/60A PWM Blue Solar Charge Controller Features:1.Build-in industrial micro controller.2.Big LCD display,all adjustable controlling parameter of the system.3.Fully 4-stage PWM charge management.4.Build-in all necessory protections including short-circuit protection,open-circuit protection,reverse protection,over-load protection.5.Dual mosfet Reverse current protection ,low heat productionLCD display/key and Operations:MENU:Switch between different display,or to enter/exit setting by long press.UP: Press to increase value.DOWN:Press to decrease value.System Connection:1.Connect the battery to the charge regulator - plus and minus.2.Connect the photovoltaic module to the regulator - plus and minus.3.Connect the consumer to the charge regulator - plus and minus.*The reverse order applies when deinstalling!*An improper sequence order can damage the controller!Attention:1.press the [Down] button to ON/OFF load manully at main display.2.the work mode is working as below:[24H] load output 24hours[1-23H] load on after sunset and closed after setting hours[0H] Dusk to dawn3.Batteries:Only fit for OPEN, AGM, GEL4.The charge regulator is only suitable for,regulating solar modules Never connect another charging source to the charge regulator.5.Please make sure your battery has enough voltage for the controller to recognize the battery type before first installation.Specifications:Load: Light ControlMPN: RBLModel: RBL-30A,RBL-60ASystem Voltage: 12V 24VMax Solar input(Solar Panel):36V(24V battery) 18V(12V battery)Max input power: 390W(12V system); 780W(24V system)Equalization: 12.6V(sealed) 14.2V(Gel) 14.6V(flood)Float charge: 13.7V(defaul,adjustable)，12.0-15.0VDischarge stop voltage: 10.7V(defaul,adjustable)，9.0-11.5VDischarge reconnect voltage:12.5V(defaul,adjustable)，11.0-13.0VRated current: 30A,60ASelf-consume:<10mABatteries:Only fit for OPEN, AGM, GELOperating Temperature:-35℃~60℃USB output:5V/2A MaxDimension:13.4*7*3.3cmPackage includes:1x Solar Charge Controller1xUser Manual PaymentDelivery detailsReturn PolicyAbout usContact usPayment☛ We accept Paypal,Credit Card, e-Check . etc. Delivery detailsUS Ship within 24 Hours, approximate delivery time according to different Shipping way (just estimated, not guaranteed): • 2-5 business days to buyer in USA via stander shipment, eg.USPS • 2-3 business days to buyer in USA via Expedited shipment, eg.UPS,Priority Mail . Return PolicyFree Return, we accept 60 days Money Back or Exchange Guarantee for All Items. About usLinlinstore90 is a department store which focus on Home&Garden,LED Lights,Automotive, Electronic items,Entertainment,Tools items,from indoor to outdoor, daily to work. Items ship within 24 hours from NJ,US. Free shipping, free returning and money back. Contact usFor any questions, please contact us at the first time.We will respond as soon as possible. On Jan 17, 2024 at 16:45:20 PST, seller added the following information:

Price: 13.99 USD

Location: Sayreville, New Jersey

End Time: 2024-02-18T00:40:16.000Z

Shipping Cost: 0 USD