Mobile Phone Repair and Remove Screen Electric Heating Plate Welding Table

Description: Constant temperature heating platform Mobile phone repair screen separator electric heating plate preheating platform welding platform adjustable temperature Wide range of uses: ●Component heating operation ●SMD remanufacturing operation ●PCB board disassembly and welding operation ●Physical and chemical container heating ●Other equipment or appliance heating Features: ● The CPU controls the temperature, which is accurate and constant. ●The heating ring is easy to install. ●The temperature setting provides two modes: normal setting and timely setting. ●The temperature display is intuitive and accurate. ● With automatic detection sensor function. High-quality aluminum alloy plate with high thermal efficiency and uniform temperature. Specification: Temperature setting: Press and hold the * button for more than 1 second to enter the temperature setting mode, and then press the * button to switch the number of temperature values to be set and set by the temperature rise or cool down button. Instant temperature setting: In the constant temperature state of the heating table, the direct heating button or the cooling button can adjust the current working temperature by ±50 °C. Caveat 1. The working platform placed on the heating table should be flat and the material must be heat resistant. 2, in the course of work, the board surface and the surrounding is very hot, be careful to guard against burns, burns! 3, the object to be heated should pay attention to safety, too high temperature may damage the heating components. 4. It is forbidden to use heating plates near flammable and flammable objects. 5. To move or touch the machine, remember to cut off the power supply and wait until the heating plate is completely cooled to room temperature. 6. This machine is a high temperature electric heating product. If you do not use the machine, please cut off the power supply to avoid danger and accident. 7. In order to prolong the life of the heating element and the machine, it is forbidden to use the machine continuously for a long time at high temperature (above 300 °C). Under normal circumstances, the continuous working time of the machine should not exceed eight hours. Note 1. Make sure the ground wire of the machine is well grounded. 2. Do not let the air flow blow directly on the board surface, otherwise it will affect the heating of the heater.

Price: 67.99 USD

Location: shenzhen

End Time: 2024-12-30T17:03:18.000Z

Shipping Cost: 42.92 USD