Mastervolt Mac Plus 12/24-30 + CZone

Description: Mac Plus 12/24-30 + CZone Boost the Service Battery Too often, service batteries don’t get the charge they need. This is a problem made worse by smart alternators and start/stop systems, which result in slow and insufficient charges. The Mac Plus DC-DC charger solves this problem, providing a quick, safe, and consistent charge to the service battery. And, by knowing when the engine is running and providing charge, users can be sure that the Mac Plus will never drain a starter battery. Proven Mastervolt Quality Users get peace of mind knowing that they have the best on board. Using the proven Mastervolt 3-step+ charge algorithm, the Mac Plus delivers a quick and easy charge, even for completely flat batteries. A robust design holds up in even the harshest conditions, with battery temperature-optimized charging and a high-quality aluminum housing to ensure superior protection against dust and water ingress. The power-efficient design also allows the Mac Plus to operate silently and without a fan. Total Power Flexibility With a wide DC input range, the Mac Plus allows for all DC sources and can charge two batteries from a single alternator or charger. It supports a full range of chemistries and battery types, including lithium. It also functions seamlessly with modern alternators such as Euro 5 and 6, ensuring proper charging by providing constant power, even when the alternator is inactive. Parallel configuration of up to ten units will provide over 100 amperes. Advanced high-frequency technology with modern microprocessors ensures minimal power loss when switching from 12V to 24V and vice versa. Analog voltage sense ports are also available to compensate for voltage drops and maintain proper charging. Superior Monitoring ; Control Compatibility with CZone ;, NMEA 2000 ;, and MasterBus delivers truly superior monitoring and control and ensures Mac Plus integrates easily into complete systems. Achieve the best performance possible via various controllers and high-quality MOSFETs. And configure the Mac Plus with ease via MasterAdjust, the CZone configuration tool, or even via the on-board DIP switches. Features:Fast and safe charging, even during short tripsFanless design for silent operationSuitable for flooded, Gel, AGM, and Li-Ion batteries (incl. LiFePO4)Even charges fully depleted batteriesEngine run detection protects the starter batteryAdjustable current limits to meet Euro 5/6 requirementsVoltage stabilization protects sensitive equipment, lights, and loadsParallel operation to obtain charging capacities well over 100 AmpsMasterBus, CZone, and NMEA 2000 are compatible for intelligent system monitoring and automationTemperature compensation and voltage sense for an optimal charging resultE-Mark/R10 certification for mobile applicationsPower supply mode offers stable power for sensitive loadsHeavy-duty connections for easy installation and quick setup via DIP switches Specifications:Battery Temperature Sensor: Yes, includedBattery Voltage Sense: Yes General Specifications:Status Indicator: Yes, 3-color LEDCommunication Protocol: MasterBus, CZone ; NMEA 2000Output Voltage: 20-30 VNominal Output Voltage: 24 VOutput Voltage Stabilization: 2 % at extremes of temperatures, load, and inputOutput Voltage Ripple (peak-peak): Max. 1 %Max. Output Power: 725 WNominal Output Power: 675 WMax. Output Current: 30 AOutput Charge Current (3-step mode): 30 ANominal Input Voltage: 12 VInput Voltage Range: 10-16 VMax. Input Current: 50 AGalvanic Isolation: NoVoltage Limited: YesEfficiency: > 95 % (at nom. input voltage, full load); peak 97Parallel Configuration: YesAlarm Contact: Yes, through MasterBusMasterBus Powering: NoEngine Run Signal Input: Yes (active high/active low)DIP Switches: Yes, for basic setupDimensions, H x W x D: 255 x 165 x 66 mm (10.0 x 6.5 x 2.6 inch)Weight: 2 kg (4.4 lb)Compliance: CE, E-Mark, SAE J1171 ; ISO 8846 Ignition Protected Technical Specifications:No-load Consumption: Charge Characteristic: 3-traps+Battery Types: Flooded, Gel, AGM, spiral, Lithium Ion, traction, user-defined3-Step Charge Option: Yes (DIP switch settings)DC Consumption: Connections: 3 x M8 terminal for cable diameters of 10-50 mm², (positive input, positive output, joint negative connection) 8-pole screw connection for cable diameters of 0.75-1.5 mm² (remote on/off, temperature sensor, voltage measurementTemperature Range (ambient temp.): -25 degrees C to 60 degrees C; derating > 40Cooling: Natural coolingProtections: Overload, over temperature, DC short circuit, reversed polarity (fuse)MasterBus Compatible: Yes

Price: 480.16 USD

Location: 8721

End Time: 2024-12-23T19:25:19.000Z

Shipping Cost: 0 USD