Description: Up for sale here is this P700 amplifier board rebuild set for a Marantz 2220B (not the 2220). This is all the parts you need to rebuild a working Marantz 2220B amplifier board, except the relay. Over time the amp boards start developing issues with diodes, transistors, and capacitors, and sometimes completely blow up. The old parts are weak and failing. We will make them new again! This kit is intended to rebuild a working amplifier board, though it can fix your board if you have issues with the smaller transistors. This kit includes all 10 capacitors (replacements for all the electrolytic & tantalum capacitors, 4 transistors (replacements for H701-H704), and 4 diodes (replacements for the MV-13 varistors). There are two different relays that can be found on the 2220B amplifier board. The normal relay is larger and will be labeled MY or similar. I have the replacement for that one available here. A small number of 2220B amp boards use a smaller, "milky white" relay marked LY instead. I have that one available here. Just use "add to cart" on the relay and the kit, and shipping will combine automatically. This kit does NOT include any other diodes, the other transistors, any resistors, or any output transistors. I have new OnSemi MJ21195G/MJ21196G outputs listed here if you need them. Please don't buy any of the fake Chinese "Sanken" transistors on eBay--those are counterfeit and will blow up. These are all high-quality brand new genuine parts. The capacitors are Nichicon PW, Nichicon KL, Panasonic FC, and Wima film caps at the correct uf and the same or higher voltage ratings and the transistors & diodes are Fairchild/Onsemi and are the correct subs for the original transistors/diodes. These are extremely high-quality parts, and they are what I use when I rebuild Marantz gear. Frankly, "recapping" is a waste of time if you're not going to replace the transistors as well. A lot of times the transistors age worse than the caps, so you should definitely change out the transistors while you're in there. If you're having amp board issues, it's very likely to be a transistor issue. I will include a surprisingly well-written instruction sheet, but this is a moderately complicated repair, so if you don't have much experience with this, buy the kit and take it to a professional. You should definitely have a fair amount of soldering experience and have a decent soldering iron, a dim-bulb tester, and heat-sink compound, as well as the usual tools. Please see my pictures for details. US shipping and handling is $5, and international is $18, no matter what quantity you buy. All my small parts are set up for combined shipping, so just use the "add to cart" feature and then check out all at once, and it will combine shipping. If you have any questions, please ask. Looking for more parts? I have power switches, feet, pushbuttons, top case screws, bottom screws, faceplate screws, white LED fuse lamps, blue LED fuse lamps, 6.3v bi-pin bulbs, 8v bi-pin bulbs, 12v bi-pin bulbs, wired 8v 60ma bulbs, new power cords, new main capacitors for the Marantz 1060/2230, wired Pioneer speaker plug replacements, new 630v yellow film capacitors at 38 different values, new 1200v yellow film capacitors at 15 values, a large variety of transistors for vintage stereo repair, new Wima film capacitors for stereo repair, new 250v yellow film crossover capacitors, and more. Just use "add to cart" on everything you want and then check out for combined shipping.
Price: 17 USD
Location: Milwaukee, Wisconsin
End Time: 2023-08-07T15:46:06.000Z
Shipping Cost: 5 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Marantz
