Description: Parameters: Input Interface / Output Interface: 100A High Current Bite Screw Stud Voltage measurement range: 0.00V ~ 200V, resolution accuracy: 0.01V Current measurement range: 0.00A ~ 20A, resolution accuracy: 0.01A Capacity accumulation range: 0 ~ 999.999Ah, resolution accuracy: 0.01Ah Power accumulation range: 0 ~ 9999.9Wh, resolution accuracy: 0.01Wh Power measurement range: 0000.00 ~ 150W, resolution accuracy: 0.01W Impedance measurement range: 1 ~ 999.9 Europe, resolution accuracy: 0.01 Europe Temperature measurement range: 0 ~ 99 ℃, resolution accuracy: 1 ℃ Timing maximum time: 999 hours 59 minutes 59 seconds, resolution accuracy: 1 second Refresh time: > 500mS / times Measurement rate: about 0.5 times / sec Overvoltage overcurrent set the alarm mode: show alert interface to remind the user Overpressure reminder setting range: 1 ~ 200V Low voltage reminder setting range: 0 ~ 190V Overflow reminder set range: 0.2 ~ 100A Product size: 156mm * 96mm * 58mm Operating temperature: -10 ~ +60 ℃ Working humidity: 10 ~ 80 (no doubt) Working pressure: 80 ~ 106kPa Note: Exceeding the specified power will burn the product. The USB function of this load meter is to connect the trigger equipment The current cannot be adjusted via USB, and it is adjusted by the knob on the load meter Including 1 * 150W USB Adjustable Constant Current Load Tester Prevent burning warning: when the input voltage battery and large power test, access must be beforeusing current adjustment knob counterclockwise to the minimum to zero, then the access, accordingto the priority according to current power to slowly adjust current knob, must not instantly transferred infull, so there are excessive instantaneous power load discharge tube burnt huge risk! Please use thespecial attention to this point, thank you! power supply methods: 1. DC6-12V DC5.0 power supply; 2. DC6-12V Micro USB power supply.The body discharge power cannot exceed 150W, otherwise there is a risk of burnout. Voltage measurement range: 0.00V ~ 200V, Current measurement range: 0.00A ~ 20A. How to operate: Set the capacity, power, time using the Keystrokes method Reset:1. Reset button Long all data (mAh, Klitschko, 00: 00: 00); 2. Fast button twice capacity reset (mAh); 3. Fast button three power reset (ㅁ);4. Fast button Four time reset (00:00:00); 5. Fast button five settings auto standby, Discharge count down regularly; 6. No load output No load, fast seven key, And current zero zero current, Environmental temperature Accurate calibration. 150W power refers to: In accordance with the power calculation formula P = UI (power = voltage x current); 10V input Approximately 18A discharge current 20V input Approximately 9A discharge current 30V input Approximately 6A discharge current.
Price: 63.05 USD
Location: Dothan, Alabama
End Time: 2025-01-02T12:38:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Color: Black
Size: 1
EAN: 0673400138323
ISBN: 0673400138323
Package Dimensions LxWxH: 7.83x7.24x4.21 Inches
Weight: 1.41 Pounds
Type: Does not apply
Brand: MakerHawk
