Description: ***PLEASE NOTE*** Action figure scales vary widely. We try to hit the Classified 1/12 and the McF/Mythic 1.0 scales. Please use photo references with figures for sizing. You are responsible for choosing the best size pieces for your figure. Js Armory does not accept returns for mistakes in size. IF you are in doubt if it will fit, please send us a message and we will assist you in your purchase. Thank you. ****READ ABOVE**** Lurg Skullsmash the Unlucky orc skull head for 1.0 Mythic Legions Printed in Resione TH72 or M70/TH72 Designed by Jason Demon Customs & Designs https://www.instagram.com/jason_demon_3d_studio/ The heads are sized to pop on Mythic Legions 1.0, if you want to use it on a different neck, please refer to the instructions below. There is a method of using plastic tubing on neck balls to allow for the bigger neck holes. You can view the video here: https://youtube.com/shorts/XaQlgWPWRxE?si=CGrHNN2b4rJLvHMx Heads will need to be fitted for the figure you choose. You can get away with sticky tack on the ball peg but a more permanent solution is best. Dremeling, putty, etc may be needed to ensure a proper fit. I use a method that utilizes hot glue. Use petroleum jelly on the neck peg. Fill the head hole with enough glue to push the peg into the head and some of the glue to squeeze around the neck ball. As it dries, continue to move the neck peg so it will not bind in the hole. NO FIGURES ARE INCLUDED. ONLY THE HEAD. There will be differences and imperfections in each piece including small flaws in prints. I strive to make quality items. Please understand that these are more fragile than a manufactured item. Please handle them with care. Thank you so much for considering a purchase!
Price: 13.99 USD
Location: Roseville, California
End Time: 2024-12-28T08:38:22.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Return policy details:
Type: Does Not Apply
