Litcessory Cut-End to Cut-End Connector for Philips Wiz LED Light Strips

Description: ✔ ENDLESS DESIGN -- create breaks in your lightstrips, run lights under cabinets, create lighting for shelves, or connect lightstrips across an entire room -- the possibilities are endless! ✔ TECH SPECS -- designed for the Philips Lightstrip system, supports runs up to 33 feet (10 meters), cable is UL listed, made for indoor locations only. ✔ LITCESSORY'S HASSLE-FREE 2 YEAR WARRANTY -- We know you'll love this product, but if you have any issues at all, just send us a message and we'll be happy to assist! Product Description Cut-End to Cut-End Extension Connector Philips only allows for a single continuous lightstrip run. Litcessory products allow for several! This cut-end to cut-end extension connector, specifically designed for the Philips Wiz Lightstrip system, enables you to connect one cut light directly to another cut lightstrip. No more wasting costly lightstrip pieces! You can also use this connector to create corners for your lightstrip run, allowing for more design flexibility than ever before! Our cables are flexible and flat, which makes them inconspicuous - perfect for designing your ideal lighting setup! This product is great for Reusing the end of a cut lightstrip Inserting a corner into a lightstrip run MADE FOR INDOOR DRY LOCATIONS ONLY Frequently Asked Questions: Will Litcessory products make my light strip dimmer? No, Litcessory products do not affect the brightness of the lights, as long as the total length of the light strip (light strips plus any length of the Litcessory product) stays within 10 meters, your lights will be just as bright! ! What is reverse polarity and how do I fix it? Reverse polarity occurs when you connect the wrong end of a 6-pin connector. The flow of electricity is reversed and the light strip does not turn on. This is a common occurrence when setting up your project and is easily fixed. I used a cut end connector and now the colors on my light strip do not match. How can i fix this? If your lights do not have the correct colors after connecting a cut end connector, this means that the cut end connector is not making a solid connection to the connection points on the light strips. Try the following: Unplug the power supply Make sure the back of the connection points (opposite side from the LEDs) are in contact with the metal prongs of the cut end connector and that it is fully inserted. Close the cap on the cut end connector and tighten with a pair of pliers. Use a lot of pressure. You should hear a slight "click". To ensure that your cut end connector stays snug, you can wrap the cut end connector tightly with electrical tape. If you're still having trouble after trying the steps above, please contact our amazing support team. We are always happy to help! Can you insert 6-pin connectors into the cut end connector? No, you cannot insert a 6-pin connector into the cut end connector. If you need to connect a strip light with a cut end to a 6-pin connector, you'll need our cut end to 6-pin cable. Remember: cut light strips connect to cut end connectors only and the 6-pin ends can only connect to 6-pin connectors. Cut light strips cannot be connected to a 6-pin connector. Can I plug an extension cord into a Cut End to Cut End Connector? No, to connect an extension cable to a cut end strip, you will need to use our 6-Pin Connector to Cut End Connector. Remember our rule of thumb: Cut Light Strip connect only to Cut End connectors. 6-pin connectors only connect to other 6-pin connectors. Cut End connectors cannot be connected to 6-pin connectors. How to install the Cut-End Connector Step 1 Unplug the Lightstrip. Turn the lightstrip on its side and create a puncture mark, then cut a small slit into the plastic. Tear the plastic sheathing across the lightstrip. Cut away from the lightstrip and remove the extra plastic. Make sure the plastic is removed from both sides of the lightstrip Step 1 Step 2 Step 3 Step 4 Connection Type Cut-End to Cut-End Extension Connector (50mm) Cut-End to Cut-End Connector 6-Pin to Cut-End Connector 6-Pin to Cut-End Extension Connector (50mm) Extension Cable (3m) Lightstrip Mounting Tape (16ft) Compatible with Philips Hue Lightstrip Plus ✓ ✓ ✓ ✓ ✓ ✓ Can be placed between the controller and the first lightstrip - - Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter Yes, with the use of our Controller to 6-Pin Adapter - Supports lightstrip runs up to 33 feet/10 meters (lightstrips and extension cables combined) ✓ ✓ ✓ ✓ ✓ - Cable is UL Listed ✓ ✓ - ✓ ✓ - Indoor/Outdoor Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Indoor Only Connection Type Cut-End to Cut-End Cut-End to Cut-End 6-Pin to Cut-End 6-Pin to Cut-End 6-Pin to 6-Pin - 6-Pin Connector Removable? - - ✓ ✓ ✓ - Philips only allows for a single continuous lightstrip run. Litcessory products allow for several! This cut-end to cut-end connector, specifically designed for the Philips Wiz Light Strip system, enables you to connect one cut lightstrip directly to another cut lightstrip. No more wasting costly lightstrip pieces! This product is great for Reusing the end of a cut lightstrip MADE FOR INDOOR DRY LOCATIONS ONLY

Price: 20.39 USD

Location: Las Vegas, US

End Time: 2025-01-18T09:23:40.000Z

Shipping Cost: 5.24 USD