Liquid Rubber Smooth Polyurethane Deck Coating - Solar Protection Deck Sealan...

Description: Polyurethane Smooth Deck Coating forms a hard yet flexible, single-component, protective membrane that combines specific polyurethane and acrylic polymers. This easy to apply, ultra-low VOC coating can be used to protect decks, docks, outdoor walkways, floors, and much more. Given the cured membrane's superior strength, waterproof properties, and high adhesion to most substrates, 's Polyurethane Deck Coating is an ideal solution for indoor and outdoor, and hot and cold environments. This high tensile coating is designed for multiple surfaces including wood, concrete, and metal and should be applied 3-4 coats. Application: Can be applied using a brush, roller, or single component sprayer to provide a seamless and fully adhered membrane to most substrates. Ensure a clean, dry surface and use Deck and Patio Cleaner. Fill gaps, seams, and screw holes with a high quality wood filler. Apply minimum thickness of 1 gallon/40 sq ft (3.7 sq m). It should require 3-4 heavy coats. High traffic areas require 1 gallon/30 sq ft (2.8 sq m). For larger areas, pour onto surface and roll. Apply the next coat as soon as possible, not allowing extended time between if possible. Ensure coating is dry to the touch with no uncured material underneath before moving on to the next coat. Avoid hot, direct sunlight during application and apply about 10C/50F. Remove painters tape while still wet. Drying Time: At 25C/77F and 50% relative humidity, fully cures in 72 hours at 1mm. Curing time increases in colder temperatures or higher humidity so environmental conditions must be considered before application. INNOVATIVE PROTECTIVE DECK COATINGS - Polyurethane Deck Coating is a high-performance polyurethane coating with a hard, durable & waterproof surface with excellent UV stability POLYURETHANE COATING FOR - Deck protection, on concrete or wood walkways, pool decks, indoor/outdoor floors, fences, baseboards, plywood surfaces, and more EASY TO APPLY - Apply using a conventional brush or 3/8 (10mm) nap microfiber roller COVERAGE - 50 square feet per gallon, final coverage after 3-4 generous coats. 30 square feet per gallon for high traffic areas (4-5 generous coats) APPLICATION - Avoid hot, intense direct sunlight during application. Apply above 10 degrees Celcius (50 degrees Fahrenheit) including overnight temperatures. Do not apply later in the day if dew is forecasted or if rain is expected within 24 hours

Price: 132.1 USD

Location: Brentwood, New York

End Time: 2024-12-08T14:34:03.000Z

Shipping Cost: 0 USD