KM50 Electrical Circuit Tester Power Detection Auto 12V 24V Powerscan Voltmeter

Description: KM50 Power Detection Auto 12V 24V Powerscan Voltmeter Electrical Circuit Tester The KZYEE KM50 Power Scan kitis the most revolutionary circuit tester to date, which works off of 12-24 Voltsources, featuring DC Voltage, AC Voltage, Frequency, Duty Cycle, Fuel Injection Circuit Detection, Resistance, and DiodeEspecially, in AC Voltage, Frequency, Duty Cycle, and Fuel Inject Modes, users can long-press the mode button to switch between Waveform Display Mode and Digital Display Mode. The power scan is indeed the ultimate in power and affordability, allowing users to check circuitry in one single step. An absolute must for every technician who is looking for a fast and accurate solution to electrical systems diagnostic. Kzyee KM50 Description:Makes locating shorts and open circuits easierEngineered to work on all 12-24VDC systemsHighly reliable and extremely easy to use with long strong cableBuilt-in flashlight enables you to work in the darkLED screen allows you to read voltage, current and resistance at the fingertipTest mode contain Fuel Inject Mode, Frequency Mode, Diode Testing Mode, AV Voltage, DC Voltage, Current Resistance, LED, including most car circuit test systemIncluding Cigarette Lighter adaptor, battery test clips, easy to get battery supply from the carCircuit Breaker Protection: Ability to Power Up Components. Automatically shut-off if current exceeds 5 Amperes, it design to protect an electrical circuit from damage caused by over-current, typically resulting from an overload or short circuit.Warm Note: This probe is very sharp on the pointed end, easily to get hurt. Better to be more careful when performing.Kzyee KM50 Support 7 Models Test:Fuel Inject ModeFuel Inject Mode is specifically set-up for fast and easy injector circuit diagnosis.Frequency ModeShow the min frequency, max frequency and display the signal waveform in real time.Duty Cycle ModeShow the min duty cycle, max duty cycle, and display the signal waveform in real time.DC Voltage ModeDC mode is for testing DC (direct current) voltages. Voltage testing is as easy as contacting the probe tip to a circuit and reading the display.AC Voltage ModeThe LCD will display the max and mini voltage value, and display the signal waveform in real-time. Resistance Testing ModeWhen resistance value is less than 30Ω, the instrument buzzer will alarm and the green LED will light. This function can be used as continuity test.Diode Testing ModeContact the probe tip to diode positive terminal, connect the auxiliary ground lead to the diode negative terminal, the screen will display the forward voltage drop, which indicates forward bias. If swapping the probe tip with auxiliary ground lead, the screen will not display voltage, which indicates reverse bias. It also displays the max and mini values during measurementAPPLICATIONS:Test millivolts for parasitic draws, charging system connectors, starting systems, sensors, modules and much moreTest for good source ground and power feedsTest pulse width in fuel injectors and ignition modulesTest frequency (HZ) of regulators, injectors, motors, and sensorsMeasure the resistance of alternators, regulators, switches, solenoids, interlocks, sensor wiring, fuel pumps, and much moreMeasure DC and AC Voltage on diodes, sensors, modules, motors, relays, fuses, actuators, rectifiers, and many moreProduct Specifications:Supply Voltage: 8V DC ~ 30V DC；Frequency: 0Hz ~ 1MhzDC/ AC Voltage Test: -110V ~ 110VDuty Cycle: 0.0~100.0%；Rating Current: 1A~8 AFuel Injection:Voltage: 0~180VTime: 0~25ms On Oct 21, 2024 at 15:51:01 PDT, seller added the following information:

Price: 83.99 USD

Location: Houston, Texas

End Time: 2024-11-21T23:45:38.000Z

Shipping Cost: 0 USD