KLIXON. P/N: CWV58WD-27. PHENOLIC THREE PHASE MOTOR PROTECTOR. 1.25" DIA, EARED

Description: KLIXON. P/N: CWV58WD-27. PHENOLIC THREE PHASE MOTOR PROTECTOR. 1.25" DIAMETER., EARED COMMERCIAL BASE., MANUAL PUSH BUTTON RESET., INCLUDES RUBBER PROTECTIVE COVER., HAS (6) SIX 6" LONG WIRE LEADS WITH FEMALE SPADE TERMINALS WIRE CONNECTIONS., SIZE: 3/4., TERMINALS: 6 TERMINAL HIGH CAPACITY., PROVIDES PROTECTION AGAINST OVERHEATING FROM RUNNING AND STALLED ROTOR CONDITIONS INCLUDING: SINGLE PHASING, STALLING OR FAILURE TO START, HIGH AMBIENT, PLUGGING DUTY, HEAVY OVERLOADS, VENTILATION FAILURES, ETC., HORSEPOWER: 1-3., VOLTAGE: 220/440V., MAX CURRENT: 220V : 60, 440V : 45., BASE NUMBERS: 1, 2 ,3, 4, 5, 6., TOTAL DIMMENSIONS: 1 5/8" LONG X 1 1/4" WIDE X 1 5/8" HIGH., INCLUDES: MOTOR PROTECTOR, RUBBER COVER, INFORMATION SHEET, PACKAGING AND BOX., ORIGINAL OEM REPLACEMENT PART., GUARANTEED TO WORK PERFECTLY., BRAND NEW CONDITION., NEVER USED., I CAN SUPPLY MORE PICTURES IF REQUESTED. Features: Provides protection against overheating from running and stalled rotor conditions, including: Single-Phasing Plugging Duty Stalling or Failure to Start Heavy Overloads High Ambient Ventilation Failures Mounting: The degree of protection obtained depends to a large extent on the protector location and its manner of mounting. The protector should be located in the motor so that it will receive the maximum amount of heating from the windings, not only for running, but also for stalled rotor conditions. The best location depends upon the construction of the motor. The protector could be located in be the air-shield, endbell or possibly the stator iron. Preferably, it should be in the discharge unit. KLIXON Phenolic Motor Protectors are equipped with a bimetallic snap acting disc, on which the contacts are mounted, and through which the current flows. If overheating conditions occur, the heating effect of the current flow through the Klixon disc and the influence of motor heat will cause the disc temperature to rise. When the disc reaches the calibrated setpoint, the KLIXON protector automatically opens and shuts down the motor, limiting the winding and shell temperature. When the motor has cooled to an acceptable operating level, allowing the protector to cool to its reset temperature, the KLIXON protector resets automatically to a closed contact position allowing the motor to restart. Manual reset versions are also available for applications where automatic restarting may be hazardous to equipment or operations. Features: Normally closed make or break KLIXON contact system, which isoperated by a snap action disc, is sensitive to both temperature andcurrent. Precision calibration temperature calibrated and inspected undercontrolled conditions for dependable performance. Automatic or manual reset series available Easy to install VDE certificate with production surveillance, overheating protector.37 amperes maximum locked rotor 230 VAC, File 4464.4-4510-1013,License No. 3938 UG for 3/4 M.P. only. Inherent protection devices for approximately 1/2 to 5 h.p. motorsused in applications such as industrial motors, agricultural equipment,well and sump pumps, fans, air conditioners, refrigerators, homeappliances, etc. When properly applied, protector shuts off motor when temperatureexceeds maximum safe level due to an overload or stalled (lockedrotor) condition.

Price: 100 USD

Location: Waretown, New Jersey

End Time: 2024-10-24T01:05:31.000Z

Shipping Cost: N/A USD