Description: NEW Keurig 2.0 Brewer Top Needle Cleaning Maintenance Accessory Keurig 2.0 Brewer Maintenance Accessory Cleaning Tool is for Keurig 2.0 Machines. It will not work with other Keurig machines. It will not work with other brands of coffee makers. Cleaning tool will only help with cleaning clogged needles. It will not help with other coffee maker issues. SEE BELOW FOR COMPLETE STEPS 1. Brewer Maintenance Accessory If you're having trouble brewing, there may be coffee grounds stuck in the brewer's entrance needle. Simply use the Keurig Brewer Maintenance Accessory and get back to brewing. Follow these few quick steps. 2. Fill the Silicone Bulb To begin make sure your brewer is powered off. With the printed side the brewer mainentance accessory facing up, fill the silicone bulb to the top with water. Lift the handle and place the maintenance accessory in the pod holder. 3. Place Accessory into Pod Holder Lift the handle and place the maintenance accessory in the pod holder. Be sure the arrows are pointing down. Push firmly to ensure the accessory is fully inserted before lowering the handle. 4. Flush Water Through Needle Raise and lower the handle a total of five times. This process flushes water through the brewer's entrance needle to draw out coffee grounds. 5. Collect Coffee Grounds Now remove the accessory from the pod holder. You will be able to see any coffee grounds collected. 6. Begin Cleansing Brew Next perform a cleansing brew. Power the brewer on and place a mug on the drip tray. Lift the handle to be sure the pod holder is empty. 7. Cleanse Needle with Hot Water Lower the handle and follow the instructions on the touch screen to brew 6 oz of hot water. 8. Empty Mug in Sink Once the brew is complete, pour the contents of the mug into the sink. 9. Clean and Store Brewer Maintenance Accessory To clean your brewer maintenance accessory simply rinse with warm water and allow to air dry completely. Be sure to store it in a safe place until the next use. Note: Not dishwasher safe and do not store in pod holder.
Price: 8 USD
Location: Fishkill, New York
End Time: 2025-01-01T06:15:31.000Z
Shipping Cost: N/A USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Power Source: Wall Plug-In
Suitable For: Brewer
Capacity: 0.04
Item Height: 1 in
Compatible Brand: For Cuisinart, For Keuring
Color: Orange
Item Depth: 2 in
Brand: Keurig
Number in Pack: 1
Features: Reusable
Finish: Silicon
Compatible Model: Keurig, Keurig 2.0 & Plus Series, Cleaning Tool Clogged Needles, 1.0 and 2.0
Material: Silicon
Type: Brew Group
Model: KPCS: 5000057664
Power: N/A
