Description: ELECTRONIC LUBE OIL CONTROL 40" Cab The P400AD2 is a single point electronic Lube Oil Control. The Eltronic 120 is a 120V AC solenoid valve with high precision line voltage control. With its electronic lube oil control, this motor offers optimum lubrication and requires only minimal manual adjustments. The compressor is equipped with a lube oil pump that provides precise flow control of lubricant to bearings, gear pump or gear box. It's ideal for service trucks, painters, sales aids and other vehicles where maintenance of proper lubrication of diesel engines is important. The P400AD-2 is an electronic lube oil control specifically designed for engine room applications. The unit monitors the engine-room lube-oil system level and automatically d With this electronic lube oil control system, it is possible to automatically fill the bearings for a perfect lubrication. This control unit can also be used for mounting on wide-shuttle belt P=400AD-2, which must have an application of 12.75 Psi under open condition and 1.5 Psi under closed condition. Experience 50 years of excellence with Johnson Controls' Electrotech Lube Oil Controls. Electrotech valves provide high accuracy, repeatability, temperature compensation and tare feature. Electrotech gives you total control over lube oil flow for precision control, monitoring and improved safety. The P400AD-2 swivel valve electric control is designed for control of lube oil lines. The control has heavy duty nylon linkages and stainless steel springs to reduce wear. The VERTAMATIC E-1075 Series is an electronic lube oil controller for pumping base oils with viscosities of 40 to 1000 cSt. The E-1075 Series is equipped with the time delay option P400AD-2, which can be set up to 12 hours. This capability is useful in many applications, including systems that have a change in time or temperature during production after hours or when not being directly monitored by plant personnel. The LubeOil Eltronic is a fully electronic direct acting valve, which controls lubricating oil flow to the cylinder. The valve has a fully electronically controlled operator and Pilot Damper Assembly. Our Lube-Oil Control System P400AD-2 is designed to allow the user to control the flow of lubricant to rated pressure and vacuum at a selected periodic rate. The open and close pressures will be factory set, but the time it takes to open and close, called the timing cycle, can be set by the user at a rate from 30 seconds to a full second. The Overhaul Automatic Lubing system controls lube oil applied to a gearbox automatically to a predetermined safe level. The pumped air moves the piston which moves the slider to regulate the admission of fluid from a reservoir to a chamber containing an elastomer spring which pushes the piston back up as the oil pressure drops. The Johnson Controls Eltronic 120Sec. Del. Electronic Oil Control 120V 50/60 Hz), P/N 400AD-2 Shunt Voltage from battery to 140 volts 0.4A, Lugged Bars 0.25" x 0.4320" L=1.54 Arm Shaped Wires 5 to 35 Arms Each See Drawing for Full Details
Price: 336.33 USD
Location: Morton Grove, Illinois
End Time: 2024-12-25T06:49:53.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Johnson Controls
MPN: P545NCB-22
