Description: Ivoclar Programat EP 5000 G2 Pressing Furnace. There is only a pin head chip on the back outside all else looks new. The oven heats properly and goes through all the programs fine. BUT it will not calibrate fully to the 2nd phase of the program. The vacuum also throws a code saying it did not pull full vacuum. Just hit the (esc.) button and the code goes away. Here in Utah at 4,800 ft. all furnaces do not pull vacuum to the max. It might be fine at sea level, I just can't test it. I am including the vac. pump that came with it and it runs great. When first turned on the furnace goes through all the pre program tests perfect. When I tested the press program, a code came up saying malfunction in the press drive. I tested it without a ring in it to press, therefore the malfunction code. I set the price so you could have someone repair all if you wanted to. I have been using the oven everyday with no problems, except the codes do come up. The oven will fire your porcelain just fine. It has been great oven ! This Item will be sold "AS IS"
Price: 3450 USD
Location: Orem, Utah
End Time: 2024-12-01T21:30:39.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Ivoclar Vivadent
Software Version: V8.10
Labfurnaces Type: Porcelain Oven and Pressing Furnace
Unit Type: Unit
Labfurnaces Acrylic Capable?: Yes
Labfurnaces Vacuum Pump: Yes, Included
Labfurnaces Chamber Shape: Round
Model: Programat EP 5000 G2
MPN: Does Not Apply
Country/Region of Manufacture: Germany
Intended Use/Discipline: Dental Laboratory, Dentistry
Furnace/Oven Type: Porcelain Furnace
