Instapak Quick RT #100 Bulk - 72 Bags 25 X 27"

Description: Instapak Quick RT # 100 - Bulk Quantity72 - Bags 25 X 27"This New Bag size is intended to address a clear market need for a larger Instapak Quick bag the new bag will be approximately 25% - 30% larger than the 80RT bag, as measured by foam volume. Instapak Quick® RT (Room Temperature) Foam PackagingInnovative, Highly Protective Packaging With No Start-Up CostsInstapak Quick® RT Packaging: All the cost-saving benefits and proven performance of Instapak foam packaging without the need for equipment.Easy-to-Use: Anyone can become a packaging expert - instantlySuperior Product Protection: Virtually eliminate shipping damageNo Start Up Costs: No dispensing system or warming unit neededVersatile: Protects products of almost any size, shape and weightFast: Expands in seconds to form custom-fit protective foam cushions cushionsConvenient: Takes up little space and is completely mobile so you can use it anywhereCustomer Satisfaction: Product arrives in a neat professional packageThe Right Instapak Quick® Product for Your ApplicationQuick® RT provides general duty cushioning and light blocking and bracing for products of all different sizes and weights. It is designed to work across a wide range of applications. For heavier products, Quick Tuff® RT offers the maximum protection and expands the versatility while enhancing the performance of the Quick® packaging process. How Instapak Quick® RT Foam Packaging WorksInstapak Quick® RT protective foam packaging can be activated right out of the box and requires no additional equipment.Press! Press hard on the component "A" oval to break seal.Pat! Alternately "pat" back and forth on the "A" and "B" ovals fifteen to twenty times.Pack! Nestle the product into the rising foam. Repeat the process as needed.Determine If Instapak Quick® RT Foam Packaging is Right for YouWhich Foam Do I Need?Instapak Quick® RT is used to protect products of various size, shape and weight. To determine which Instapak Quick® RT packaging foam is best suited for your product, refer to the chart below.You will need to know two attributes of your product:Product weightArea - in square inches - of the smallest side of the productExample: Your product is 13 inches wide x 10 inches long x 5 inches high and weighs 10 pounds. The smallest side is 10 x 5 = 50 square inches. Using the chart, you find that Instapak Quick® RT is the right foam to protect your product. If the same size product weighs 25 pounds, Instapak Quick Tuff® RT foam should be used instead.1. Completely unfold an Instapak Quick® RT bag, and lay flat on a hard surface. Press hard on the component "A" oval to break seal.2. Alternately "pat" back and forth on the "A" and "B" ovals fifteen to twenty times. Immediately place the bag into an empty box prior to the foam expanding.3. As the foam begins to expand, center and hold in position the product to be packaged, until it is supported by the foam.4. Activate a second bag, and quickly place on top of the product. Close the carton flaps so that the foam expands to form a top cushion.*For Rugged Products - those classified as "Not Fragile" - Instapak Quick® RT foam should provide adequate protection. Please Note: The shipping and transportation environment is a very unpredictable chain of events. Packaging is not an exact science, thus we caution that the chart above be used as a guide and not a final stamp of approval of guarantee that Instapak Quick® RT foam will or will not be successful in protecting your product. You should test the application to determine the suitablilty of Instapak Quick® RT foam packaging for the intended use. Product & Safety Information for Instapak Quick® RT Foam Packaging This product contains two separate liquids (Component "A" and Component "B"), that when combined and mixed together, will react and expand to form polyurethane foam. Please note: Instapak Quick® RT is for industrial use only.Instapak Quick® ProductBag Color:MSDS* (PDF):Instapak Quick® RTBlue Instapak Quick Tuff® RTWhite Instapak Quick®Silver *The information contained in the MSDS’s applies to the liquid components and not the resulting foam.Chemical Characteristics Storage Temperature:Usage Temperature:Instapak Quick® RT & Quick Tuff® RT50-100° F65-90° FInstapak Quick®50-100° FQuick® Warmer temperatureFoam Typical Performance Characterisitcs Rise timeFree rise core density*Bag surface temperatureInstapak Quick® RT15-20 secondsnominal 0.55 lb/ft3145-170° FInstapak Quick Tuff® RT25-35 secondsnominal 1.1 lb/ft3140-165° FInstapak Quick®15-20 secondsnominal 0.4 lb/ft3130-155° F*In-Use Density: The density of foam obtained when rise is restricted is always higher than the free rise density for all commercial packaging foams. It is typically 1.5 to 2.0 times the free rise density.Expanded FoamInstapak Quick® RT components "A" and "B" are mixed inside an internal pouch. The material that expands is liquid polyurethane. This liquid quickly expands and solidifies to form a custom-fit protective packaging material for your product. Polyurethane foams are chemically inert and not considered hazardous materials. In fact, they are found in many aspects of our daily lives, e.g., bedding, chair cushions, carpet padding and automobiles. The packaging area should be designated as a "no smoking" area. Smoking in the presence of polyurethane foams, as with most packaging materials, increases the risk of fire. ***************************************************************************************************************************************************************************** We're an authorized dealer for Sealed Air and you can contact us with any questions: Hexa Packaging Supplies

Price: 447.9 USD

Location: Laguna Hills, California

End Time: 2024-08-12T19:01:45.000Z

Shipping Cost: 39.98 USD