HANGKAI 48V Electric Outboard Motor Boat Engine Brushless Trolling Motor 1800W

Description: Specification Model: 48v 7.0hp Material: Aluminum Alloy Color: Black Process: Spray Painting Starting System: Switch Knob Added Motor Type: Pure Copper Brushless Motor Voltage: 48v Thrust: 1250kg/2755.77 Lbs Speed: About 8-10km/4.97-6.2miles/H (Depending on the Environment, Water, Boat Load, the Speed Will Be Different) Battery Model Recommendation: Batteries with a Capacity of over 120ah(Not Included) Rated Power: 1800w Rated Voltage: 48v Rated Speed: 3000rpm Rated Current: 45a Control System: Tiller Control Rod Length: 910mm/35.83in Total Height: 1320mm/51.97in Transom Plate Height: 381 ~ 508mm/15~20in Length of Suitable Ships: About 4m/13.12ft Package Included 1* Electric Outboard Motor 1* Clamping Device HANGKAI 48V Electric Outboard Motor Boat Engine Brushless Trolling Motor 1800W48v Electric Outboard Motor, Hangkai Boat Engine Brushless Trolling Motor 1800wApplicationThis Electric Outboard Motor Is Suitable for Small Ships with Different Materials About 13.12 Feet in Length, Such As Inflatable Boats, Iron Boats, Plastic Boats, Fiberglass Boats, and Wooden Boats. It Is Widely Used in Fishery, Aquaculture, Outdoor Exploration, Etc. SpecificationModel: 48v 7.0hpMaterial: Aluminum AlloyColor: BlackProcess: Spray PaintingStarting System: Switch Knob AddedMotor Type: Pure Copper Brushless MotorVoltage: 48vThrust: 1250kg/2755.77 LbsSpeed: About 8-10km/4.97-6.2miles/H (Depending on the Environment, Water, Boat Load, the Speed Will Be Different)Battery Model Recommendation: Batteries with a Capacity of over 120ah(Not Included)Rated Power: 1800wRated Voltage: 48vRated Speed: 3000rpmRated Current: 45aControl System: Tiller ControlRod Length: 910mm/35.83inTotal Height: 1320mm/51.97inTransom Plate Height: 381 ~ 508mm/15~20inLength of Suitable Ships: About 4m/13.12ftNet Weight: 12kg/26.46lbsGross Weight: 16kg/35.27lbsPackage Size: 139*56*24cm/54.72*22.04*9.44in Package Included1* Electric Outboard Motor1* Clamping DeviceAll Accessories Needed for Installation DescriptionWith a Huge Thrust, a Super Strong Shaft, and Precise Speed Control, the Outboard Engine Is a Good Helper for Your Water Work. Its Brushless Pure Copper Motor and Flexible Steering Let You Sneak up on Fish, Outdoor Adventure, Etc. with the Best Speed and Low Noise. Key FeaturesHigh-quality Material: High Strength and Corrosion-resistant Aluminum Alloy Make It Highly Impact Resistant and Sturdy, Able to Withstand Fresh and Salt Water Environments. Easy to Install: the Simple Structure and Lightweight (26.45 Lbs) Allows You to Easily Install Without Any Tools. Strong Power: 7.0 Horsepower, 1800 Watts Power, Pure Copper Brushless Motor Provides Strong Power to It. Environmentally Friendly: the Electrically Powered Outboard Eliminates Exhaust Pollution from Gasoline. and the Brushless Motor Produces less Wear and Noise, Creating a Smoother User Experience for You. Multi-gear Cruising: Having Step-less Speed Change and Constant Speed Function in Reverse and Forward Gears Allows You to Enjoy Different Cruising Experiences. High Adaptability: the 15~20 Inch Adjustable Bracket Is Easy to Install on Different Size Boats. It Can Also Be Rotated 360° for Multi-angle Control. High Efficiency and Energy-saving: Compared with the Brush Motor, the Brushless Motor Is More Efficient and Easy to Maintain Without Replacing the Carbon Brush, Which Saves Electricity and Time. Customer Service: We Aim to Provide Quality Products and Services. If You Have Any Problems, Please Feel Free to Contact Us. We Will Reply and Solve the Problem for You As Soon As Possible. Details Ergonomic Handle: Its Handle Conforms to the Ergonomic Design, Making It Comfortable to Hold. the Gear Button at the Handle Is Designed to Facilitate Your Operation. Three-blade Propeller: the Three-blade Propeller with Streamlined Design Can Reduce Water Resistance and Provide Stronger Power During Operation. Heat Dissipation Holes: Multiple Heat Dissipation Holes Can Help the Motor Dissipate Heat and Prolong Its Service Life. Clamping Device: Clamping Device Can Help You Easily Adjust the Position of the Electric Outboard Motor According to the Height of the Tail of the Hull, to Ensure That It Plays a Greater Role in Propulsion. Notes1. Please Note That This Product Does Not Include Batteries, Please Prepare Before Use. Recommended Battery Type: 48v 100ah Can Be Used for About 2 Hours, the Capacity of More than 120ah Batteries (Not Included), Lead-acid Batteries Are Recommended.2. When Shifting, Please Step by Step and Do Not Accelerate Suddenly, Otherwise, the Service Life of the Product Will Be Affected.3. the Machine Should Be Hung Vertically in the Middle of the Stern Plate. If the Propeller Is Too Deep, It Will Increase the Assistance of Water, Thus Reducing the Thrust. If It Is Too Shallow, It Will Make the Propeller Idle. the Appropriate Depth Is Between 15-20cm/5.9-7.87 Inch.4. the Actual Battery Life Depends on Your Battery. Speed Depends on Many Factors Such As Load, Water Conditions, and Wind Speed. It Is Difficult to Give an Exact Speed Rating, and We Will Only Give the Approximate Reference Speed.5. Please Allow the Slight Color Difference Caused by the Shooting Light and 1-3cm Error Due to Manual Measurement. Please Make Sure You Do Not Mind Before You Order. PaymentDelivery detailsTerms of salesAbout usContact usPayment We accept ebay payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping: 2-9 working days to: USA Terms of sales We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them! About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with ebay message.Please feel free to contact us if you have any questions.G.W./N.W.(kgs)14/11Transom plate height (mm)381 ~ 508Motor typeBrushless motorNot shipping countrycanariasRated speed (r/min)3000Control systemTiller controlStarting systemSwitch knob addedManufacturer Part NumberDoes Not ApplyBrandUnbrandedRated power (W)1800Rod length (cm)91Rated current (A)35Model48V 7.0HPRated voltage (V)48Total height (cm)126Engine(HP)7 HPOn Nov 18, 2024 at 00:22:58 PST, seller added the following information:

Price: 260.04 USD

Location: Chino, California

End Time: 2024-11-27T02:40:49.000Z

Shipping Cost: 0 USD