Leviton

Godspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 Vantage

Description: Product Information:**IMPORTANT** PLEASE READ BEFORE PURCHASING : Rear Shock is mounted upside down so valve adjustment is accessible without removing the strut. Vehicle realignment is recommended after installation, PROFESSIONAL INSTALLATION RECOMMENDED. This set of coilovers doesn't come with installation instructions for as you may know, these are after market suspension parts. We highly recommend professional installation ONLY. Godspeed Project will ONLY warranty the item if the item is installed by a ASE Certified Mechanic. Godspeed Project's MAXX is our premier single-adjustable coilover suspension kit. These coilovers are designed to be a streetable race built coilover at an affordable price. It features a monotube damper that is made out of a carbon seamless steel 52mm tube with a 44mm internal piston providing maximum damper response. The cold-bent springs are made from high strength SAE9252 steel to optimize the balance between performance and comfort. Using high quality shock oil made in Italy, Godspeed Project can guarantee exceptional damper performance at any temperature on and off the track. The top of the shock is attached to the car using a high quality top hat that features a high performance bearing pillow ball mount (when applicable). The bottom shock brackets are made out of a T7075 forged aluminum or carbon steel brackets for lighter weight without sacrificing durability which also includes brake line brackets (when applicable). The MAXX offers 40 level of damper adjustability which can be set to your preference. Features:Spring rates: Front: 10 kg/mm / Rear: 12 kg/mm40 precise levels of damper adjustmentMonotube shock designAnodized shock bodyLightweight aluminum shock body and T7075 forged aluminum / carbon steel brackets52mm carbon steel shock body with a 44mm internal pistonIndependent ride height and spring preload adjustmentsItalian IP F.A made shock oil with a high viscosity index1 Year Warranty from Date of PurchaseADDITIONAL INFORMATIONSPECIAL NOTESPrior to installation, verify all hardware and properly tighten and spring preload is set to 5-10mm(1/4-3/8in). Our technical department is available to answer any other questions.DAMPING LEVELS40 LevelsHEIGHT ADJUSTMENTYesSPRING RATE(FRONT)10 kg/mm (560 lbs/inch)SPRING RATE(REAR)12 kg/mm (672 lbs/inch)SPRING LENGTH(FRONT)180 mmSPRING LENGTH(REAR)140 mmFRONT TOP MOUNTYes, Standard MountREAR TOP MOUNTYes, Standard MountSPRING INNER DIAMETER(FRONT)62 mm (2.44 inch)SPRING INNER DIAMETER(REAR)62 mm (2.44 inch)WARRANTY NOTENoUSER GUIDECoilover User Guide Prior to installation, verify all hardware and properly preload suspension to 10mm. Our technical department is available to answer any other questions. Application: Aston Martin: V8 Vantage (2006-2017) **Rear Shock is mounted upside down so valve adjustment is accessible without removing the strut.** Shipping:We may either ship through USPS, UPS, or FedEx at our own discretion.Products are usually shipped out Monday – Friday. Please contact us through email for assistance regarding other shipping methods.Return policy:When receiving your package, please open all of the boxes immediately to check if all the contents are inside and not damaged. All damaged or defective items must be reported within 2 business days from the day the packaged is delivered. If the package appears to be damaged on the outside, please refuse to accept it from the carrier; or please make sure when signing the shipper's proof-of-delivery slip, you include a note stating that the package is or appears damaged. If you do accept a damaged shipment, please inform us immediately. Depending on the product and where/how it was shipped, it may be necessary for you to deal with the carrier. If the product received is defective, a replacement will be sent as soon as possible. If you decide to return the defective item, rather than replace it, a restocking fee will be assessed (15-50% depending on the item) and your original shipping and processing charges will not be refunded. Also, returned products must be in its original packaging which allows us to re-sell the product. We will refuse any damaged or products that are not in good condition. If after 30 days of receiving your product, it proves to be defective, we would like for you to deal with the manufacturer. They will inform you on how to proceed based on their policies. If you are unhappy in any way, please contact us through eBay messages. We will provide you instructions on how and where to return the product.

Price: 1260 USD

Location: Covina, California

End Time: 2024-11-24T19:48:36.000Z

Shipping Cost: 0 USD

Product Images

Godspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 VantageGodspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 VantageGodspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 VantageGodspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 VantageGodspeed GSP Maxx Coilovers Suspension Lowering Kit for Aston Martin V8 Vantage

Item Specifics

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: GodSpeed Project

Type: Shock & Spring Assembly

Manufacturer Part Number: MMX2134

Features: 100% Accuracy of Fit, Adjustable

Universal Fitment: No

Placement on Vehicle: Front, Left, Rear, Right

Performance Part: Yes

Recommended

GODSPEED PROJECT 4PCS FRONT + REAR CAMBER ARM KIT FOR 09-13 INFINITI G37
GODSPEED PROJECT 4PCS FRONT + REAR CAMBER ARM KIT FOR 09-13 INFINITI G37

$340.00

View Details
GSP GodSpeed Project FRONT Adjustable Sway Bar Links 250mm-310mm w/ 10mm Bolt
GSP GodSpeed Project FRONT Adjustable Sway Bar Links 250mm-310mm w/ 10mm Bolt

$60.00

View Details
GODSPEED PROJECT TRACTION-S SUSPENSION LOWERING SPRINGS FOR 07-11 HONDA CRV CR-V
GODSPEED PROJECT TRACTION-S SUSPENSION LOWERING SPRINGS FOR 07-11 HONDA CRV CR-V

$180.00

View Details
Godspeed Steel Monors Coilovers Fits 2015-2021 Subaru WRX STI
Godspeed Steel Monors Coilovers Fits 2015-2021 Subaru WRX STI

$765.00

View Details
GODSPEED PROJECT FRONT ADJ. LOWER CONTROL ARMS FOR 09-16 HYUNDAI GENESIS COUPE
GODSPEED PROJECT FRONT ADJ. LOWER CONTROL ARMS FOR 09-16 HYUNDAI GENESIS COUPE

$170.00

View Details
2x PIECES GODSPEED PROJECT RACING GSP LASER PRINTED DECALS STICKERS
2x PIECES GODSPEED PROJECT RACING GSP LASER PRINTED DECALS STICKERS

$5.99

View Details
Godspeed Project Radial Bearing Set for Coilovers (Koyo Bearing)  MSS-RB01
Godspeed Project Radial Bearing Set for Coilovers (Koyo Bearing) MSS-RB01

$59.50

View Details
Godspeed MonoRS Coilovers Damper Kit Fits 2018-2022 Toyota Camry SE / XSE (XV70)
Godspeed MonoRS Coilovers Damper Kit Fits 2018-2022 Toyota Camry SE / XSE (XV70)

$795.00

View Details
GODSPEED PROJECT 4PCS FRONT + REAR CAMBER ARM KIT FOR 14-15 INFINITI Q40
GODSPEED PROJECT 4PCS FRONT + REAR CAMBER ARM KIT FOR 14-15 INFINITI Q40

$340.00

View Details
Godspeed Project Custom Coilover Springs 8KG/180MM/62MM ID-SET OF 2
Godspeed Project Custom Coilover Springs 8KG/180MM/62MM ID-SET OF 2

$85.00

View Details