Description: Customize your model, 1:24 scale model car or truck decals for Revell, AMT, Tamiya, Monogram and more.Water-Slide Clear Backed Decals: These are great for light colored applications in which you want to see the background. Cut closely around the decal before applying for best results. Due to being clear, these decals look great on most surfaces but will not show up well on dark surfaces. These decals set well around any non-flat surfaces. We do suggest a decal solution for even better results. These are perfect for model cars, trains, planes, ships and more. They also work great on ceramics and more.Water-Slide White Backed Decals: These look great on any surface. They even look good on black. Cut closely around the decal before applying for best results. Looks good on any surface, light or dark. These decals require a fine cut around the decal with a Exacto or another sharp knife or small scissor. Not getting a close cut can result in poor quality appearance. These are perfect for model cars, trains, planes, ships and more. They also work great on ceramics and more. Instructions for Water-Slide Decals Instructions: 1. Cut decal to fit, in most cases the more precise the cut the better the decal will look. Clear backed decals will let the background through so will be more forgiving. White backed decals will need to be cut precisely unless being placed on white surfaces. Decal installation is not an easy thing to do, it does take some experience and practice to get it right. Once you master it, it will completely change modeling as you know it. The ability to add custom decals will change the hobby for you.2. Fill your bowl with room temperature water. Submerge your precut decal for 30-60 seconds or until the middle of the decal can easily be slid around. Remove from water. 3. Quickly apply it to your clean decal surface. Position decal, backing side down and gently slide backing off. Keep the backing flush with your project as you gently pull it out from behind the decal. Press firmly, use your fingers, a damp cloth/ paper towel, or a mini squeegee to remove air bubbles. Gently pad off any excess water. 4. Let the decal set and dry for at least 3 hours. Don't expose to direct sunlight during this time. Faq?sWhat is the optimal water temperature for soaking a decal?Between 77°F-86°F or 25°C-30°C. If the water is cooler, it may take longer to release from the backing.What's the difference between the transparent decal and the white waterslide decal?The clear or transparent decal is see-through so the base color of your object will show through your printed design.If you do not want your base material to show through the design a white waterslide will be better?The white decal has an opaque base color and is great for applying onto darker surfaces.What is the waterslide decal paper thickness paper weight?The total paperweight is 210 microns or 200 GSM.How do you remove a waterslide decal once it is dry?Once cured it can be a bit difficult to remove waterslide decals. Try soaking in hot water, you can scrape it off while it is soaking, or you could also use the product Goo Gone to remove the decal. For a natural removal alternative, try soaking the decal in vinegar. Note: We are not responsible for ruined decals during application. These decals are tougher than the ones that are included with most kits, so they are easier to apply than those but do require that you cut them out of the sheet they arrive on. These are not pre-cut like the pre-cut decals that arrive in most model kits. NOTE: We strongly recommend a decal solution that can be found anywhere. This solution will shrink the decals to better fit the surface, especially contoured applications and will really give you a nice-looking finished decal. We have experimented with different brand and have found they are all pretty good so use the one you are comfortable with.
Price: 6.99 USD
Location: Richmond, Texas
End Time: 2024-09-01T12:52:58.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Number of Items in Set: 1
Character: Varies
Color: Multicolor
Scale: 1:24
Material: Water-Slide
Set Includes: Decal
Year Manufactured: 2024
Item Length: 3.5"
Vintage: No
Brand: Tortuga Hobby Works
Type: Decal
Unit Type: Unit
Model: Stickers & Decals
Theme: Art
Features: Miniature
Time Period Manufactured: 2020-Now
Country/Region of Manufacture: United States
Finish: Glossy
Available Variations
Color: Clear
Price: 6.99 USD
Available Quantity: 10
Quantity Sold: 0
Color: White
Price: 6.99 USD
Available Quantity: 10
Quantity Sold: 0
