Furuno BBDS1 Sounder Box

Description: Furuno BBDS1 Sounder Box Part #: BBDS1 UPC: 611679335371 Description: The BBDS1 is a new network fish finder for NavNet 3D and NavNet TZtouch that features an all new bottom discrimination function, as well as the FDF (Furuno Digital Filter) capability of the DFF1. The BBDS1 determines the bottom structure and separates them into the following categories: mud, sand, gravel, and rock. This is achieved by analyzing echo characteristics from the bottom components such as particle size and hardness. Connect the BBDS1 to your NavNet 3D or NavNet TZtouch network and get ready for your NavNet system to provide you with valuable information to locate rich fishing grounds, boosting your catch. There are two bottom discrimination display modes to select from, Standard Mode and Probability Mode. In Standard Mode, the most probable materials on the bottom (mud, sand, gravel or rock) are indicated in either graphic mode or a 4-color bar on the bottom of the display. Because bottom material can change frequently and can sometimes be difficult to identify, Probability Mode shows you what material the bottom has the greatest chance of consisting of by displaying the possible bottom materials proportionally within the 4-color bar. Standard Features: Frequency: 50/200 kHz alternately transmitted Output Power: 600 W/1 kW Power Supply: 12-24 VDC: 1.1-0.4 A (in output power of 1 kW) Temperature : -15 to + 55 degree Celsius (in operation) Relative Humidity: 93% at 40 degree Celsius Waterproofing: IP20 (not waterproofed) Required Conditions for Bottom Discrimination Detection Range: 5-100 m Boat Speed: 0-10 kn Transducer mounting: Thru-hull or transom mount only MFD8/12/BB software: v2.06 or later Notes: 1. The result shown by this function may sometimes be different from the actual bottom components. 2. For best performance, do not use in-hull mounted transducers with the BBDS1. 3. The BBDS1 may show an incorrect ground discrimination result, especially when there is a big fish school right under the boat. This is because enough echoes may not be received from the bottom. 4. Materials such as shell, coral, or a sunken ship are indicated as the most similar material from the four bottom categories: mud, sand, gravel, or rock, according to reflected echoes. 5. Auto mode is automatically activated when the bottom discrimination function is turned on. (Manual mode is not selectable.) 6. The BBDS1 is not compatible with NavNet 1 or NavNet vx2. 7. Appropriate Furuno Transducer recommended for best resluts Transducer options (see table below): Bottom Discrimination Fish Finders will function as a standard Fish Finder with other transducers, however, the ground discrimination mode will be disabled Due to power and frequency requirements for bottom discrimination signal processing, in-hull or "shoot-thru" transducers are not compatible These Transducers WILL Work With Bottom Discrimination Transducer Descritpion FCV627 FCV587 BBDS1 520-PSD 600w Plastic Thru-hull * * * 520-5MSD 600w bronze Thru-hull * * * 525-5PWD 600W Transom Mount * * * 525STID-MSD 600w Bronze Thru-Hull Multi Sensor * * * 525STID-PWD 600W Transom Mount Multi-Sensor * * * CA50/200-12M1 1kW Bronze Thru-Hull * * CA50/200-1T1 1kW Rubber Coated * * 1 MB1100 us Required for this Transducer These Transducers WILL NOT Work With Bottom Discrimination Transducer Description FCV627 FCV587 BBDS1 ST-01PTB Plastic Transom Clip-On Speed and Temp Sensor (6-Pin) with Bracket * * * ST-02MSB Bronze Thru-Hull Speed and Temp Sensor (6-Pin) * * * 520-IHD Plastic In-Hull Transducer, 600W (10-Pin) * * * 525STID-MSD7 Bronze Thru-Hull Multisensor with 7 Inch Stem, 600W (10-Pin) * * * 525T-BSD Bronze Thru-Hull Transducer with Temp, 600W (10-Pin) * * * 525TID-BHD Bronze Thru-Hull Transducer with Temp and High-Speed Fairing Block, 1 kW (10-Pin) * * 525TID-TMD Transom Mount Transducer with Temp, 1kW (10-Pin) * * 525T-LTD/12 Bronze Thru-Hull Transducer with Temp, 600W (10-Pin), 12 Tilted Element * * * 525T-LTD/20 Bronze Thru-Hull Transducer with Temp, 600W (10-Pin), 20 Tilted Element * * * 525T-PPD Plastic Puck Transducer with Temp, for Trolling Motors, 600W (10-Pin) * * * 526TID-HDD Bronze Broadband Thru-Hull Transducer with Temp, Built-in Diplexer and Hi-Speed Fairing Block, 1kW (10-Pin) * * AIRB1641210F Bronze Thru-Hull, Low Profile Transducer with Temp, 1kW (10-Pin), 12 Tilted Element * * AIRB1642010F Bronze Thru-Hull, Low Profile Transducer with Temp, 1kW (10-Pin), 20 Tilted Element * * 527ID-IHD Urethane In-Hull Transducer, 1kW (10-pin), Broadband * * 556TID-HDD Stainless Steel Thru-Hull Transducer with Temp and Fairing Block, 1 kW (10-Pin) * * CA200B-5 Bronze Thru-Hull Transducer, Type 200B-5, 1kW (No Plug) * * CA200B-5S Rubber Coated Transducer, Type 200B-5S, 1kW (No Plug) * * CA50B-6B Rubber Coated Transducer, Type 50B-6B, 1kW, 15m Cable (No Plug) * * CA50B-6G Rubber Coated Transducer, Type 50B-6G, 1kW (No Plug) * *

Price: 850 USD

Location: Manasquan, New Jersey

End Time: 2024-11-23T17:05:05.000Z

Shipping Cost: 0 USD