Electric Sharp Edge Tester Toy Safety Sharp Edge Detector Gauge with Test Tape

Description: Electric Sharp Edge Tester Toy Safety Sharp Edge Detector Gauge with Test Tape Introduction: Sharp edge tester is used to test toys can be touched to whether the location of harm security of the sharp edges, which belongs to the toy safety test. Specifications: Standard: U.S.A: 16 CFR 1500.48 / F963 ASTM 4.8 European Union: EN-71 19988.2 China: 6675-2003 A.5.9 GB Volume: 41 * 41 * 66 mm Weight: 489 G Material Science: Stainless steel S.S.T Packing List: Standard configuration Sharp Edge Tester*1 Foot pedal switch*1 Power supply charger*1 Table mounting bracket*1 Operation manual*1 Using Method: In the sharp edge tester head roll ring. The overlap size can not exceed the tape .0.1in (0.25mm). Fixed - like to do the test side of the side can not be moved and bending. When the assembled toy can be reduced to become the end location experiment, the sample should be removed to test, but if removed Will affect its hardness, can be used for other objects to make it hard, but its support area can not be greater than the tested objects. The tester and test end, the angle between the 90 degree + 5. The contact points, the test object edge and tape to tape at the middle part about scheduling. Test of the test of the application of the most unfavorable position of the test. The sharp edge tester, efforts to 1.35 LBS(6N). In the tape position to exert efforts to make the light, the edge stress test 1.35 LBS. The sharp edge tester, start the switch shaft to rotate a circle. Be careful, don't cut apart the tape to expand its size, using the ruler to measure its length cut. If the cutting length exceeds 0.5in (12.5mm) Test side edge for the edge.

Price: 849.91 USD

Location: 合肥

End Time: 2024-05-08T07:52:13.000Z

Shipping Cost: 0 USD