Description: Description: This Monster Cooling relay wiring kit takes all of the guess work out of installing a single or a dual fan setup. Perfect for the professional auto mechanic,the weekend machanic and for all DIY'ers. It will make installing any Electric Fan(s) to your cooling system project that much easier About the Relay: Relay is an electrical control device that usually used in automatic control circuit.The relay in fact is an automatic switch which uses a smaller current to control a larger current.What's the Relay Used for:Compatible with almost all automobiles and devices equipped with a 12V DC power supply. Like starter kills, power door lock/actuator control, change a low current output to high current, add ignition/accessory outputs,control motors/other electronics. It is also suitable for automobile used for control, alarms, horn, headlight and more. This kit is set up to turn your electric fan on at 185 degrees and shut off at 175 degrees and will work with any 12 volt system. About the Relay Pins: Pins 85 & 86 - are used to turn 'on' the relay. You need a positive (+) and negative (-) power source to turn on the relay. - Pin 85 - is usually negative (-)- Pin 86 - is usually positive (+)-Pin 30 - is either a (+) or (-) source that feeds Pin 87 or Pin 87a-Pin 87 - when the relay is 'on': Pin 30 and Pin 87 are connectedWhat's Note:The relay is rated for 30A, while the socket 14AWG wires are not big enough for the rated 30/40 amps. If you are intending to run 30 amps continuously, you could remove the spade contacts from the connector, carefully open the crimps securing the wire to the contact and recrimp/solder 10 gauge wires to it. Also, you can use 6.3 mm female connectors to connect directly to the relay pins. The relay should be good for 30 amps Please check the item pictures and size to get the suitable items. On Oct 17, 2024 at 03:17:55 PDT, seller added the following information:
Price: 19.99 USD
Location: Perth Amboy, New Jersey
End Time: 2024-12-17T08:13:15.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
OE Spec or Performance/Custom: OE Spec
Other Part Number: Lightweight Replacement
Item Diameter: 8in
Fitment Type: Direct Replacement
Items Included: Temperature Switch
Manufacturer Part Number: Does not apply
Opening Temperature: 175-185 degree
Material: Plastic and Metal
Superseded Part Number: Does not apply
Placement on Vehicle: Front
Brand: ZAP PERFORMANCE
Type: Relay Kit
QC Passed: Yes
OE/OEM Part Number: Does not apply
Manufacturer Warranty: Lifetime
Voltage: 12V DC
Features: Electrically Assisted
Delivery: US fast & free shipping
Universal Fitment: Yes
Part Type: 3/8" pipe thread
