Eco Water Based Concrete Pigment Dye for concrete countertops vanities 4 ounces

Description: Water Based Concrete Dyes We offer 20 different UV stable colored pigment dyes which can be used for all interior exterior concrete applications. The dyes are provided as ready use liquids which avoids the messy mixing of powders.They are very economical, extremely easy to apply compared to powders and dry quickly making them very versatile when compared other concrete staining systems.They can either be applied as an individual color or combined provide a multitude of different hues, shades, mottled and faux natural stone effects. If you are the more skilled artisan you can use them form any custom made pattern or picture possible, which is only limited by the boundaries of your imagination.Surface preparation is the most important step in any successful dye project. The concrete surface must be free of all contaminants including sealer, paint, dirt, grime, oil, and greases. Eco Concrete Cleaner #1 is highly effective in removing these types of contaminants. Before application, also check that the surface is absorbent with a few droplets of water. If they do not absorb readily, treat the surface with Eco Concrete Etcher. This will open up the pores of the concrete sufficiently to allow the dye to adhere properly to the concrete surface. The etcher should also be used on machine-trowelled and smooth or lightly textured surfaces. If the surface is too smooth, it can lead to the sealer lifting off the surface with the dye. The dye solution should be continually stirred or agitated during application to maintain uniformity of color. Apply the dye solution at 40 to 80°F using a pump-up sprayer. Apply approximately 24 inches from the surface using a uniform circular motion. A coverage rate of 400 to 600 sf per gallon for one coat is normal. We recommend two coats for even coverage. You can also apply with a brush, roller, or sponge for mottled effects. If the dye accumulates or puddles remove the excess with a clean damp cloth immediately. Clean-up is done with soap and water.After your staining project is complete you should seal it protect the finish with one of the following sealer systems. It is recommended that two coats of the sealer are applied either using a sprayer avoid disturbing the dyes if a solid color is required or a roller, brush, sponge or cloth achieve a mottled or faux effect.High Gloss Finish - Concrete Sealer X-4 (water based) or Concrete Sealer X-4S (solvent based).Low Gloss Finish - Concrete Sealer X-5 (water based) or Concrete Sealer X-5S (solvent based).Invisible Finish - Concrete Sealer X-3 (water based) or Concrete Sealer X-3S (solvent based). The dye solution should be continually stirred or agitated during application maintain uniformity of color. S&H is FREE in USA(48)Please contact us if you have any questionsWe offer a 100% guarantee that anything you buy from us will be exactly as described that you will be 100% satisfied or you can send it back for a 100% refund.THANK YOU FOR VISITING OUR AUCTION!!!

Price: 12.99 USD

Location: Cleveland, Tennessee

End Time: 2024-08-16T19:36:58.000Z

Shipping Cost: 11.99 USD