Description: This kit comes with two sensors offering different installation options for coolant temperature sensing.Sensor 1: Temperature Probe (Air or Coolant Fitment) It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit 0409 - 0409 not included, available separately Sensor 2: ¼ NPT Thermal Sensor Kit (Coolant Fitment Only) The Thermal Sensor can be placed into the thermostat housing, engine block, or directly into the radiator. If you would like to install this sensor in the top radiator hose, It can also be used with Temperature Sensor Adaptor Kit 0409 - 0409 not included, available separatelyThe switch can run 1 or 2 fans and be used for 12 or 24 volt applications. It has an adjustable temperature range of 104ºF to 230º Fahrenheit or 40º to 110º Celsius and can display Centigrade or Fahrenheit.Fan #1 will start once the temperature reaches the set temperature.Fan #2 (if applicable) will start operation 10 seconds after fan #1 starts. The fan/s will operate until the temperature falls by 5° Celsius below the set temperature. Sensor Wire length: 126 inches / 320cm in total - wire from switch 114 inches / 290cm plus sensor connector 11.8 inches / 30cm) The Davies Craig Digital Electric Fan Controller Kit 0445 is designed to turn on fans by sensing air temperature as it passes through the radiator with the sensor placed in the radiator fins, so there is no need to cut hoses. It has an adjustable temperature range of 104 to 230º Fahrenheit / 40 to 110º Celsius and can display Centigrade or Fahrenheit. Temperature is set by pressing the set button. The controller can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after the first fan starts. It can be operated thermally and can also be powered any time the air conditioning is on. Technical Specifications:Max voltage: 15VRated Continuous Current Draw 30 AmpsMaximum Current Draw 40 AmpsMaximum Start Up Current 60 AmpsRelay setup: Dual relaySpeed: Single speed - 10 second delay to start up the second fanApplications: works with single and dual fan applicationsTemperature Display: LED digital temp display - actual temperature + set temperatureTemperature Display: Centigrade or Fahrenheit Temperature settings: 104 to 230º F (40 to 110º C)Temperature setting: Push ButtonCircuit type: Pre-programmed micro controllerOutput wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor ProbeDimensions: 3.75" x 2.6" x 2.2" (95 x 65 x 56 mm)You can use the A/C wire as a manual override by providing it with 12 Volts from a switch.2 year warranty from Davies Craig IMPORTANT: Not designed to control Davies Craig Electric Water Pumps (EWP): to control an EWP use Davies Craig 8002 Kit Contents: Digital Fan Controller, Temperature Probe Sensor, ¼ NPT Thermal Sensor, Temperature Probe Mounting Kit, scotch lock (wire tap), yellow butt connector, ring terminal, and self tapping screws (2).Click here to shop my store! Purchase details: eCheck payments wait to ship until the eCheck clears, per PayPal instructions Sales tax is collected for most states, please review your total purchase amount before committing to buy International buyers pay import duties / customs fees My name is Chris and I sell on eBay using the golden rule: treat others as I'd want to be treated (and it's worked so far: look at my feedback since 1999 on eBay). I'm happy to answer any questions. I want each transaction to go smoothly!
Price: 85.99 USD
Location: Canton, Georgia
End Time: 2024-07-30T16:43:37.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Country/Region of Manufacture: Australia
Manufacturer Part Number: 0445
Fitment Type: Performance/Custom
Brand: Davies Craig
Manufacturer Warranty: 2 Year
