Davies Craig 0435 Digital Fan Switch with 1/4" NPT Sensor & 35mm Inline Adapter

Description: Digital Thermatic Fan Switch with 1/4" NPT Sensor & 35mm / 1.38 inch Inline Adapter KitThis Digital Thermatic / Electric Fan Switch is designed to manage your Electric Fans or Electric Water Pump (EWP)This kit includes two thermal sensors offering numerous installation options for coolant temperature sensing while the inline adapter allows easy fitting directly into the radiator hoseSensor option 1: screw the ¼ NPT sensor directly into the inline adapter and remove about 17mm (2/3”) of radiator hose, fit the inline adaptor between each hose and secure the hose clamps. Or it can be placed into the thermostat housing, engine block, or directly into the radiator. Sensor option 2: Temperature Probe: It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section.The switch can run 1 or 2 fans and be used for 12 or 24 volt applications - 24 Volt requires relays sold separately, not includedIt has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or FahrenheitFan #1 will start once the temperature reaches the set temperatureFan #2 (if applicable) will start operation 10 seconds after fan #1 startsThe fan/s will operate until the temperature falls by 5°C below the set temperatureSensor Wire length: 320 cm or 126 inches total (Wire from switch 290 cm plus sensor connector 30 cm)IP66 Rated: Protected from total dust ingress Protected from high pressure water jets from any direction, limited ingress protectionNot waterproofThe Inline Sensor Adapter simply fits into your engine’s top radiator hoseThe adaptor ends for hose fitting are 35mm / 1.38 inch in size: With the use of the 3mm adaptor sleeve included in kit, this can be increased to 41mm / 1.6 inchWith the use of the 6mm adaptor sleeve (not included, sold separately), this can be increased to 47mm / 1.85 inch (Part #18511)Two 1/4" NPT holes allow the fitment of a sensor and or air bleedYou should you only need one hole, a bung is included*Note: Kit sold in 12 volt configuration, for 24 volt application you will need to change the two relays with 2 x 24 volt relays which are not supplied in the kitContents: Digital Fan Switch IP66, Thermal Sensor Probe, Mounting Kit for Thermal Sensor Probe, ¼ NPT Thermal Sensor, Red 6mm Ring Terminal, Blue 6mm Ring Terminal, Blue Wire Joiner (qty 2), Self Tap Screw (qty 2), In-Line Adapter 35mm / 1.38 inch with 2 x 1/4" NPT Holes & Bung, Adapter - Rubber Sleeve - 3mm {1/8"} (qty 2), Hose Clamps (qty 2), InstructionsConvenient push-button settings allow you to quickly set the temperature you wish the Thermatic Fans to be activatedThe Digital Thermatic Fan Switch is supplied with connectors for a convenient and simple installAutomatically activates the Thermatic Fans at the set/targeted temperature when extra engine cooling is requiredThe Digital Thermatic Twin Fan Switch should be mounted in the engine bay close to the radiatorCan also be installed to activate an Electric Water Pump and Electric Booster Pump, see note belowNote: if using this switch for use with and Electric Water Pump (EWP), it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we recommend the Digital Controller (8002) which can manage both the EWP and your Thermatic Fans. Click here to shop my store! Purchase details: eCheck payments wait to ship until the eCheck clears, per PayPal instructions Sales tax is collected for most states, please review your total purchase amount before committing to buy International buyers pay import duties / customs fees My name is Chris and I sell on eBay using the golden rule: treat others as I'd want to be treated (and it's worked so far: look at my feedback since 1999 on eBay). I'm happy to answer any questions. I want each transaction to go smoothly!

Price: 119.99 USD

Location: Canton, Georgia

End Time: 2024-11-27T17:34:13.000Z

Shipping Cost: N/A USD