Description: Circular saw holderThis Circular Saw Holder holds 1 circular saw and should hold many common 5" saws, but may not hold the larger 6" and 7" saws. Edges are mitered to be smooth and durable. The shape of a circular saw blade is featured on the top for easy identification. The back is designed to mounted in a variety of ways including screws to the wall, pegboard* with holes at 1" on center, and Ryobi Link Wall Rails. Please check the shoe (or bottom plate) of your saw to make sure it will work when the blade is retracted it's maximum amount. The slot thru the shoe for the blade should be 1.5" wide and mostly straight. There must be a 1/4" lip to hang from without a post or support blocking it's ability to hang. If the shoe has many angular cutouts or wider areas it will not work. Please check the compatibility diagram in the photos. If mounting to the wall with screws or Ryobi Link Wall Rails, pegs stay recessed on the back and are not used. If mounting on pegboard*, pry pegs (with a small flat screwdriver) out and push into the holes. 2 curved pegs go into the top holes pointing upward and 2 straight pegs go into the bottom holes. We recommend you superglue them into place. 2 extra pegs (one curved & one straight) are included. If mounting to the Ryobi Link Wall Rails, it can be used with or without an additional screw to hold it into place. * Note that there are many different types of pegboard and some may not work. This was designed to work on 3/16" thick masonite pegboard with holes at 1" (25.4mm) on center only. NO circular saws are included. Saws shown in photos are for reference purposes only. It is 3D-printed in black PLA plastic. It is 2.5" x 5.25" x 1.2" (63mm x 133mm x 30mm). This item is 3D Printed in PLA plastic which is made from a renewable resource. It’s biodegradable and eco-friendly. These are lightweight and due to the printing process, there may be some imperfections. 3D Printing involves the heating and depositing of material on a flat board one layer at a time. Each model is custom printed to order. I print these as a hobby and am not a large scale manufacturer. They are all printed in the USA. Please see my other listings for other designs.
Price: 9.95 USD
Location: Lexington, Kentucky
End Time: 2024-08-29T00:24:02.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: Unbranded
Type: Tool Storage Bin
Features: Pegboard
Material: Plastic