Description: Foam dimensions. These foams are slightly different, and done that way by painstaking research and design. If you’re familiar with refoaming Cerwins, you’ve undoubtedly seen where the ID of the foam is just slightly too large, so when you’re done, you can see a little of the old glue ring inside your new foam, leaving a sloppy look. I specified these foams to be exactly a little different from the rest out there, and had them produced, from scratch, just for me, and now for you. So, these foams are not the same as any other you have ever gotten. First, if you measure the glue ring on a 15” Cerwin woofer cone, it comes in around 1/8 smaller, than the ID dimension of the other foams out there. (leaving that unsightly glue ring just inside the foam when you are done) These foams have a slightly smaller ID, giving you a 1/8 cushion all the way around, so when you are done, you will have a clean look. On the OD, you will also see that my foams have a larger OD, so you have more flat foam to glue to your frame. Some of the other kits are so stingy, you have just a little bit. These are wider, like Cerwin Vega originally used, although not so wide, that you run out of adjustment space when centering the cone. Then, there’s thickness. There’s a wide variance out there. These are thicker than the cheap China ones, and correct for the woofers listed. (these are different than, and not for, the clsc and xls woofers) And of course, color. Cerwin used red over gray. These are red over gray. Not paper thin like the red ones they sell from China. Not pink over gray like many sellers have. But correct thickness, RED, over gray. Glue: I’ve refoamed and reconed many hundreds of woofers over decades, and tried every glue there is. I’m including the best quality you can get. The BCA3035 is a faster drying glue solvent based glue, a favorite of speaker techs for many years. I also offer a slower drying glue, which sets slow, giving you extra of time to make your adjustments centering the cone. If you want that in addition to the fast set, just shoot me a message and I'll include it for free. The slower glue is not for foam to cone, just foam to frame. . Includes tips and tricks learned from decades of doing this myself. This kit includes two foams It's hard to make a complete application list, as Cerwin used many different cones and foams, with all differing dimensions (even on the same model there were many variences), and recones over the years have changed styles too. Fitment. The best way to get the closest foam to what you need refoamed, is by MEASUREMENTS, not model. These foams are designed for refoaming the angle attach cones that used the thin lip flat attach foam. These include the DX9 DXW15, RE38 REW15, VS150 VSW15, MX400 MXW15, M100, and possibly some of the older HED series. Those all had angle cones, yet the angle was very shallow, so the original and replacement foams for those are flat attach. These foams are not for the flat attach cones, the ones that have the flat lip on the edge of the cone, like the D9. These have an ID of about 11 3/4. Slightly smaller than the ones others have. If you have cone edge damage, and you want the foam ID even smaller, I list those for the AT15. Those are about 1/4 smaller on the ID. I know this can be confusing. But I want to get you the BEST fitting foams, for the woofers YOU have. Woofers had variations, and if your woofers were ever refoamed or reconed before, that changes things too. The best thing, is measure straight across the woofer, from inner edge of foam to inner edge of foam on the opposite side. Then email me, and/or send a picture. I'm happy to help get the size sorted out if you're unsure. But I need either the measurement, or a picture. If you have any questions, don’t hesitate to reach out. These are, the absolute best kits available. You can save twelve bucks, and look at glue rings and pink foams for the next 20 years, or spend the extra $12 and get the very best. If you want quantity, don’t need glue, etc, reach out. I will put together whatever kind of package you want. Will be packed securely and shipped promptly. This kit includes two foams. Thanks!
Price: 35.99 USD
Location: Milwaukee, Wisconsin
End Time: 2024-10-21T19:38:05.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Compatible Brand: Cerwin Vega
Brand: Brew City Audio
Type: Foam Kit
Size: 15"
MPN: Does Not Apply
Country/Region of Manufacture: Unknown
