BORT 109100 HerniaFix® Long Steel Spring Truss 1 rounded pad Hernia Belt Support

Description: SKU# 109100PRODUCT SPECIFICATIONS-Single-sided, rounded pressure pad -Non-elastic hip belt with approx. 50 cm long spring made of spring steel Intended purpose This medical device is a hernia truss which is suitable for reducing hernia of the abdominal wall (inguinal region). Indications Reducible inguinal hernia. Contraindications Unclear soft tissue swellings, sensory and circulatory disorders with the region of the body treated, skin diseases in the part of the body treated, non-reducible inguinal hernia, incarcerated hernia. Fitting instructions Hernia trusses for reducible inguinal hernia (i.e. the hernia can be pushed back into its cavity) have comprised a proven therapy concept for several decades. The pad presses against the hernial ring, thus hindering the emergence and trapping of the hernia. For attaching the aid, the patient should be placed on an appropriate examination table in psoas position: for this purpose, the patient lies flat on his back, the legs are elevated. The lower legs are placed at right angles to the thighs on a surface which should be as high as the length of the thighs. The inguinal hernia should then no longer be palpable, that is to say not emerge from the abdomen. Then, position the pad on the hernial ring. Then wrap the truss (pelvic restraint) around the body at the level of iliac crest (between the waist and hip) and fasten it. If necessary, the spring steel spring integrated into the pelvic restraint can be adjusted to the patient. Removal To remove, open the fastener and then remove the brace (hernia truss). Material composition polyester (PES), polyurethane (PUR), cotton (CO), viscose (CV) The sewn in textile label provides the precise material composition. Cleaning information Hand-washing 30 °C Do not bleach Do not dry in a tumble dryer Do not iron Do not clean chemically Do not use fabric conditioner. Air-dryCOLOR: beige COLOR: BeigeSIZES Circumference of iliac crest85cm= 32.7″ – 34.6″ inches90cm= 34.6″ – 36.6″ inches95cm= 36.6″ – 38.6″ inches100cm= 38.6″ – 40.6″ inches105cm= 40.6″ – 42.5″ inches Fitting instructions Hernia trusses for reducible inguinal hernia (i.e. the hernia can be pushed back into its cavity) have comprised a proven therapy concept for several decades. The pad presses against the hernial ring, thus hindering the emergence and trapping of the hernia. For attaching the aid, the patient should be placed on an appropriate examination table in psoas position: for this purpose, the patient lies flat on his back, the legs are elevated. The lower legs are placed at right angles to the thighs on a surface which should be as high as the length of the thighs. The inguinal hernia should then no longer be palpable, that is to say not emerge from the abdomen. Then, position the pads on the hernial rings. Then wrap the truss (pelvic restraint) around the body at the level of iliac crest (between the waist and hip) and fasten it. If necessary, the spring steel springs integrated into the pelvic restraint can be adjusted to the patient. Removal To remove, open the fastener and then remove the brace (hernia truss). Material composition polyamide (PA), polyester (PES), elastane (EL), cotton (CO), viscose (CV) The sewn in textile label provides the precise material composition. Cleaning information Delicate wash 30 °C Do not bleach Do not dry in a tumble dryer Do not iron Do not clean chemically Close the fastening to avoid damage to other laundry items. Do not use fabric conditioner. Stretch back into shape and dry in the fresh air.

Price: 49.99 USD

Location: Belton, South Carolina

End Time: 2024-02-25T19:10:35.000Z

Shipping Cost: 0 USD